Court Approval Provisions Sample Clauses

Court Approval Provisions. 4.1 Preliminary Approval and Provisional Class Certification. Plaintiff shall file her motion for preliminary approval within twenty-five (25) days of filing the Action and, for the purposes of settlement only, Elixir will not oppose class certification. The motion for preliminary approval shall request that the court: (a) conditionally certify the Settlement Class in the Action for settlement purposes only; (b) preliminarily approve the form, manner, and content of the Long Form Notice, Email Notice, Mailed Notice, Internet Notice, Publication Notice, and Claim Form described in Section 5.2 of this Agreement, and attached as Exhibits B–E; (c) direct notice be made to Settlement Class Members as described in this Agreement; (d) set a deadline for the filing of objections, exclusions, Claim Form submission, the filing of the fee, cost, and award motion, the final approval motion; and schedule the date of the Final Approval Hearing; (e) stay all proceedings in the Action until the Court renders a final decision on approval of the Agreement; (f) conditionally appoint Plaintiff as the Class Representative for settlement purposes only; (g) conditionally appoint the law firm Farnese P.C. as Class Counsel for settlement purposes only; (h) approve the objection and exclusion procedures for Settlement Class Members; and (i) appoint the Settlement Administrator. The proposed Preliminary Approval Order shall be substantially similar to the form attached as Exhibit A. Elixir shall be permitted, but not required, to file its own brief or statement as may be necessary to state its positions and defend its interests in response to Plaintiff’s motion for preliminary approval of the Settlement. Plaintiff will provide Xxxxxx’s counsel with the motion for preliminary approval that Plaintiff intends to file at least three (3) days before filing the motion with the Court. Elixir will not oppose certification of the Settlement Class.
Sample 1Sample 2
AutoNDA by SimpleDocs
Court Approval Provisions 
Sample 1Sample 2

Related to Court Approval Provisions

  • Final Provisions Clause 16

  • Survival Provisions All representations, warranties and covenants contained herein shall survive the execution and delivery of this Pledge Agreement, and shall terminate only upon the termination of this Pledge Agreement. The obligations of the Pledgor under Sections 12 and 14 hereof and the obligations of the Collateral Agent under Section 17.9(b) hereof shall survive the termination of this Pledge Agreement.

  • Federal Provisions 2.1. The use of all federal funds paid under this Grant are subject to all applicable federal regulations, including the provisions described below. 2.2. Grantee must ensure that any further distribution or payment of the federal funds paid under this Grant by means of any contract, subgrant, or other agreement between Grantee and another party for the performance of any of the activities of this Grant, includes the requirement that such funds may be used solely in a manner that complies with the provisions of this Grant. 2.3. Grantee must include and incorporate the provisions described below in all contracts and subgrants that may use, in whole or in part, the funds provided by this Grant. 2.4. Grantee must comply, and ensure the compliance by subcontractors or subgrantees, with 41 U.S.C. 4712, Program for Enhancement of Employee Whistleblower Protection. Grantee must inform subrecipients, contractors and employees, in writing, in the predominant language of the workforce, of the employee whistleblower rights and protections under 41 USC § 4712. For purposes of these provisions, the following definitions apply:

  • CLOSING PROVISIONS (a) Subscriber agrees to be identified as a customer of JetBrains and agrees that JetBrains may refer to Subscriber by name, trade name and trademark, if applicable, and may briefly describe Subscriber’s business in JetBrains marketing materials, on JetBrains Site, and in public or legal documents. Subscriber hereby grants JetBrains a worldwide, non- exclusive, royalty-free license to use Subscriber’s name and any of Subscriber’s trade names and trademarks solely pursuant to this marketing section. (b) This Agreement is governed by the laws of the Czech Republic. All disputes arising from the present Agreement and/or in connection with it shall be finally brought to and decided by any relevant competent common court in the Czech Republic. The parties agree that the United Nations Convention on Contracts for the International Sale of Goods does not apply to this Agreement. (c) JetBrains may modify this Agreement at any time by posting a revised version of the Agreement on JetBrains Site. The modified terms will become effective upon posting of a revised version of the Agreement on JetBrains Site. By continuing to use Service after the effective date of any modification to this Agreement, Subscriber agrees to be bound by the modified terms. It is Subscriber’s responsibility to check JetBrains Site regularly for modifications to this Agreement. (d) The parties are independent contractors. This Agreement does not create a partnership, franchise, joint venture, agency, or a fiduciary or employment relationship between the parties. (e) Sections 7, 8, 9, 10, 12 (c), 12(d), 14(a), 14(b), and 14(c) shall survive any termination or expiration of this Agree- ment. (f) There are no third-party beneficiaries to this Agreement. (g) If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, the provision shall be modified by the court and interpreted so as best to accomplish the objectives of the original provision to the fullest extent permitted by law, and the remaining provisions of this Agreement shall remain in effect.

  • Final provision 1. This Agreement shall be deposited with the Secretary General of the ASEAN Secretariat who shall promptly furnish a certified copy thereof to each Member State.

  • General Provisions This Assignment and Assumption shall be binding upon, and inure to the benefit of, the parties hereto and their respective successors and assigns. This Assignment and Assumption may be executed in any number of counterparts, which together shall constitute one instrument. Delivery of an executed counterpart of a signature page of this Assignment and Assumption by telecopy shall be effective as delivery of a manually executed counterpart of this Assignment and Assumption. This Assignment and Assumption shall be governed by, and construed in accordance with, the law of the State of New York.

  • Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.

  • General Provision (a) MML Advisers hereby appoints the Subadviser, and the Subadviser hereby undertakes to act, as investment subadviser to the Portfolio to provide investment advice and to perform for the Fund such other duties and functions as are hereinafter set forth. The Subadviser shall, in all matters, give to the Fund and the Trust’s Board of Trustees, directly or through MML Advisers, the benefit of the Subadviser’s best judgment, effort, advice and recommendations and shall at all times perform its obligations in compliance with: (i) the provisions of the Act and any rules or regulations thereunder and the Internal Revenue Code of 1986, as amended, as applicable to the Fund; (ii) any other provisions of state or federal law applicable to the operation of registered investment companies; (iii) the provisions of the Agreement and Declaration of Trust and Bylaws of the Trust, as amended from time to time and provided to the Subadviser by MML Advisers (collectively referred to as the “Trust Documents”); (iv) policies and determinations of the Board of Trustees of the Trust and MML Advisers, of which the Subadviser has been notified; (v) the fundamental and non-fundamental policies and investment restrictions of the Fund as reflected in the Trust’s registration statement under the Act from time to time; and (vi) the Prospectus and Statement of Additional Information of the Fund in effect from time to time (collectively referred to as the “Disclosure Documents”). (b) The officers and employees of the Subadviser responsible for providing the services of the Subadviser hereunder shall be available upon reasonable notice for consultation with respect to the provision of such services. (c) Subadviser will comply with the applicable provisions of the Fund’s pricing procedures which it has received and, upon request, will provide reasonable assistance to the Fund’s pricing agent in valuing securities held by the Fund.

  • Local Provisions (Local provisions related to these scheduling arrangements are to be set out in this Article and numbered in sequence.)

  • CONTRACTUAL PROVISIONS ATTACHMENT Important: This form contains mandatory contract provisions and must be attached to or incorporated in all copies of any contractual agreement. If it is attached to the vendor/contractor's standard contract form, then that form must be altered to contain the following provision: "The Provisions found in Contractual Provisions Attachment (Form DA-146a, Rev. 06-12), which is attached hereto, are hereby incorporated in this contract and made a part thereof." The parties agree that the following provisions are hereby incorporated into the contract to which it is attached and made a part thereof, said contract being the day of , 20 .

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!