DCP PROTECTIVE CASING Sample Clauses

DCP PROTECTIVE CASING. Each DPC housing should include 1 datalogger, 1 sealed charge controller, 1 barometric sensor, 1 sensor to detect the opening of the front door, 1 support for a 26Ah battery, 1 GOES modem, and 1 fuse connection bar (fused terminals for a 35 mm DIN rail) for the integrated connection of all power cables from sensors and other DPC components requiring electrical power. The casing should be in a rectangular format, feature a front door, and include a system with 2 (two) sets of keys/locks, along with a minimum of 2 (two) hinges for securing the access door, thereby ensuring the security of internal components. Locks for all PCD casings should include keys with the identical pattern as those in the existing DCP casings within the NETWORK. Additionally, they should have an external cover for protection against rain and adverse weather conditions. The ACTO will furnish the successful bidder with the current key to reproduce the pattern. The DCP casing should have the following features: robust; constructed of stainless steel; with highly durable UV protection; sealed from the environment; rain and water flow-resistant; excess moisture- resistant; dust and insect invasion-resistant, with white powder electrostatic paint. It should allow easy access to DCP components, including the datalogger, charge regulator, battery(s), sensor interface, and modems. It should enable battery removal without the need to remove other DCP components. The GOES modem, Datalogger, Charge Controller, and Surge Protection Devices - SPD, should be easily removable with common tools (screwdrivers/xxxxxxxx/xxxxx) for subsequent replacement. The housing should have a "gutter" type system along the entire front to prevent rainwater from entering the PCD's interior. Also, the door should have an injected and reinforced rubber seal inside. It should feature a side system facilitating opening and closing to accommodate a notebook-type microcomputer for on-site configuration and data download from the DCP. Crafted from stainless steel, it should demonstrate resilience to sun and weather, complemented by a white electrostatic powder coating. The PCD housing must be protected from direct sunlight by a stainless steel sunlight and weather- resistant shield with a white electrostatic powder coating. The casing's shield should encompass both sides, the back, and the top, enabling airflow between the casing surface and the shield. To accomplish this, there should be a minimum gap of 2 centimeters betw...
AutoNDA by SimpleDocs

Related to DCP PROTECTIVE CASING

  • Professional Development; Adverse Consequences of School Exclusion; Student Behavior The Board President or Superintendent, or their designees, will make reasonable efforts to provide ongoing professional development to Board members about the adverse consequences of school exclusion and justice-system involvement, effective classroom management strategies, culturally responsive discipline, appropriate and available supportive services for the promotion of student attendance and engagement, and developmentally appropriate disciplinary methods that promote positive and healthy school climates, i.e., Senate Bill 100 training topics. The Board will conduct periodic self-evaluations with the goal of continuous improvement. New Board Member Orientation The orientation process for newly elected or appointed Board members includes:

  • FLORIDA CONVICTED/SUSPENDED/DISCRIMINATORY COMPLAINTS By submission of an offer, the respondent affirms that it is not currently listed in the Florida Department of Management Services Convicted/Suspended/Discriminatory Complaint Vendor List.

  • Personal Protective Clothing 11.1 On commencement of employment with the Employer each employee will be issued with the following; 11.2 Where the employee requires prescription glasses, the Employer shall ensure that appropriate eye protection is issued or where the employee has had his/her glasses hardened, reimburse the employee for the cost, provided that such glasses meet appropriate safety standards. 11.3 The above mentioned equipment will be maintained by the employee and replaced by the Employer on a fair wear and tear basis. 11.4 Intentionally left blank

  • STUDENT DISCIPLINE AND TEACHER PROTECTION A. The Board recognizes its responsibility to give all reasonable support and assistance to teachers with respect to the maintenance of control and discipline in the classroom. Whenever it appears that a particular pupil requires the attention of special counselors, social workers, law enforcement personnel, physicians, or other professional persons, the principal shall be notified. The Board feels that the teacher and the specialists indicated above should work together to improve the case. B. It is recognized that discipline problems are less likely to occur in classes where a high level of student interest is maintained. It is likewise recognized that when discipline problems occur, they may most constructively be dealt with by encouragement, praise and emphasis upon a child’s desirable characteristics. A teacher may use such force as is necessary, according to the law, to protect himself/herself from attack or to prevent injury to another student. C. A teacher may ask the principal to exclude a pupil from class when the grossness of the offense, the persistence of the misbehavior, or the disruptive effect of the violation makes the continued presence of the student in the classroom intolerable. In such cases, the teacher will furnish the principal, as promptly as his/her teaching obligations will allow, full particulars of the incident in writing. D. Procedure for suspension of students from school shall be distributed to students and teachers each year. E. Any case of assault upon a teacher while on duty should be promptly reported to the Board or its designated representative. The Board will provide legal counsel to advise the teacher of his/her rights and obligations with respect to such assault and shall promptly render all reasonable assistance to the teacher in connection with handling of the incident by law enforcement and judicial authorities. F. If any teacher is complained against or sued as a result of any action taken by the teacher while in pursuit of his/her employment, the Board may provide legal counsel and render all necessary assistance to the teacher in his/her defense. G. Time lost by a teacher in connection with any incident mentioned in this Article shall not be charged against the teacher. X. The Board will reimburse teachers for any loss, damages or destruction of clothing or personal property of the teacher while on duty in the school or on school premises in those cases where the school could have reasonably prevented the loss. I. No action shall be taken upon any complaint by a parent of the student directed toward the teacher nor shall any notice thereof be included in said teacher’s personnel file unless such matter is promptly reported in writing to the teacher concerned. J. Teachers shall be expected to exercise reasonable care with respect to the safety of pupils and property, but shall not be individually liable, except in the case of gross neglect of duty, for any damage or loss to person or property.

  • Uniforms and Protective Clothing 33.1 Where the employer requires an employee to wear a uniform, it shall be provided free of charge, but shall remain the property of the employer. 33.2 Suitable protective clothing shall be provided at the employer's expense where the duty involves a risk of excessive soiling or damage to uniforms or personal clothing or a risk of injury to the employee.

  • Protective Footwear Effective January 1, 2014, and on that date for each subsequent calendar year, the Hospital will provide $120 per calendar year to each full-time and each regular part-time employee who is required by the Hospital to wear safety footwear during the course of his duties. The employees who will be required to wear safety footwear will be negotiated locally and set out in the Local Provisions Appendix. Note: The existing central language designating the classifications of employees which are deemed to require appropriate safety footwear shall be transferred to the local appendix.

  • Protective Clothing 14.1 The Employer will be required to provide the following protective equipment (SAA approved) for use, when necessary, by employees during the performance of their required duties: a) Safety helmets; b) Ear/hearing protection; c) Gloves; d) Skin protective cream/sun screen (30+ rating) In addition, one pair of UV-rated safety glasses or UV rated clip-ons’ suitable to overlay prescription spectacles (as recommended by the Victorian Building Industry Consultative Committee) shall be made available for employees who are required to work on reflective surfaces such as: • Metal decking; • Large concrete slabs exposed to sunlight; • Roofing; • Curtain xxxxxxx;

  • Protective Clothing & Equipment While not being part of any issue of protective clothing/equipment, the company shall be required to provide the following protective equipment (SAA approved) for use, when necessary, by employees during the performance of their required duties: i. safety helmets; ii. ear/hearing protection; iii. gloves;

  • Soldiers' and Sailors' Civil Relief Act The Mortgagor has not notified the Seller, and the Seller has no knowledge of any relief requested or allowed to the Mortgagor under the Relief Act or any similar state statute;

  • Corrective Measures If the Participating Generator fails to meet or maintain the requirements set forth in this Agreement and/or the CAISO Tariff, the CAISO shall be permitted to take any of the measures, contained or referenced in the CAISO Tariff, which the CAISO deems to be necessary to correct the situation.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!