Disconnect System Sample Clauses

Disconnect System. Member/Owner shall furnish and install on Member/Owner's side of the meter a safety switch which shall be capable of fully disconnecting the Member/Owner's energy generating equipment from HWE's electric service. HWE will only accept an AC disconnect switch that has a visible break/isolation knife blade type disconnection and is non-fusible and lockable. The disconnect switch shall be accessible to HWE personnel at all times. Required placard notification and AC disconnect location options are as follows.
Sample 1Sample 2
AutoNDA by SimpleDocs
Disconnect System. Member/Owner shall furnish and install on Member/Owner’s side of the meter a safety switch which shall be capable of fully disconnecting the Member/Owner’s energy generating equipment from BVEA’s electric service. The disconnect switch shall be located adjacent to BVEA’s meters and shall be of the visible break type in a metal enclosure which can be secured by a padlock. The disconnect switch shall be accessible to BVEA personnel at all times. BVEA shall have the right to disconnect the Facility from BVEA’s supply at the disconnect switch: (a) when necessary to maintain safe electrical operating conditions; (b) if in BVEA’s sole judgment, the Facility at any time adversely affects BVEA’s operation of its electrical system or the quality of BVEA’s service to other customers; (c) if the Generating Facility does not meet required codes or standards; (d) in the event of Member/Owner’s failure to maintain its retail electric service account for loads served at the Generating Facility as active and in good standing; or (e) in the event of Member/Owner’s breach of any provision of this agreement. In the event that BVEA disconnects the Generating Facility due to clauses (b), (c), (d) or (e) above, BVEA may immediately terminate this agreement , without liability to the Member/Owner, by delivering written notice to the Member/Owner of the failure to meet required codes and standards, maintain account in good standing or other breach of this agreement. The Member/Owner may disconnect the Generating Facility at any time; provided that the Member/Owner provides reasonable advance written notice to BVEA.
Sample 1Sample 2
Disconnect System. Member/Owner shall furnish and install on Member/Owner's side of the meter a safety switch which shall be capable of fully disconnecting the Member/Owner's energy generating equipment from HWE's electric service. The disconnect switch shall be located adjacent to HWE's meters and shall be of the visible break type in a metal enclosure which can be secured by a padlock. The disconnect switch shall be accessible to HWE personnel at all times. HWE shall have the right to disconnect the Facility from HWE's supply at the disconnect switch when necessary to maintain safe electrical operating conditions or, if in HWE's sole judgment, the Facility at any time adversely affects HWE's operation of its electrical system or the quality of HWE's service to other members.
Sample 1
Disconnect System. Member-Owner shall furnish and install on Member-Owner’s side of the meter a safety switch which shall be capable of fully disconnecting the Member-Owner’s energy generating equipment from Carbon’s electric service. The disconnect switch shall be located adjacent to Carbon’s meters and shall be of the visible break type in a metal enclosure which can be secured by a padlock. The disconnect switch shall be accessible to Carbon personnel at all times. Carbon shall have the right to disconnect the Facility from Carbon’s supply at the disconnect switch when necessary to maintain safe electrical operating conditions or, if in Carbon’s sole judgment, the Facility at any time adversely affects Carbon’s operation of its electrical system or the quality of Carbon’s service to other customers.
Sample 1
Disconnect System. Member/Owner shall furnish and install on Member/Owner’s side of the meter a safety switch which shall be capable of fully disconnecting the Member/Owner’s energy generating equipment from BVEA’s electric service. The disconnect switch shall be located adjacent to BVEA’s meters and shall be of the visible break type in a metal enclosure which can be secured by a padlock. The disconnect switch shall be accessible to BVEA personnel at all times. BVEA shall have the right to disconnect the Facility from BVEA’s supply at the disconnect switch: (a) when necessary to maintain safe electrical operating conditions; (b) if in BVEA’s sole judgment, the Facility at any time adversely affects BVEA’s operation of its electrical system or the quality of BVEA’s service to other customers; (c) if the Facility does not meet required codes or standards; (d) in the event of Member/Owner’s failure to maintain its retail electric service account for loads served at the Facility as active and in good standing; or
Sample 1

Related to Disconnect System

  • Disconnection Upon termination of this Agreement, Developer and Connecting Transmission Owner will take all appropriate steps to disconnect the Developer’s Large Generating Facility from the New York State Transmission System. All costs required to effectuate such disconnection shall be borne by the terminating Party, unless such termination resulted from the non-terminating Party’s Default of this Agreement or such non-terminating Party otherwise is responsible for these costs under this Agreement.

  • Manual Disconnect Switch 5.1 U.L.1741 Listed, inverter-based Tier 1 customer-owned renewable generation systems do not require a customer-installed manual disconnect switch.

  • Interconnection Customer (1) Interconnection Customer shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: None

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Network Interconnection 26.1 Interconnection between the networks of different SERVICE PROVIDERs shall be as per National Standards of CCS No.7 issued from time to time by Telecom Engineering Centre (TEC) and also subject to technical feasibility and technical integrity of the Networks and shall be within the overall framework of interconnection regulations issued by the TRAI from time to time. However, if situation so arises, INTERCONNECTION with R2MF signaling may be permitted by LICENSOR.

  • Interconnection Service Interconnection Service allows the Interconnection Customer to connect the Large Generating Facility to the Participating TO’s Transmission System and be eligible to deliver the Large Generating Facility’s output using the available capacity of the CAISO Controlled Grid. To the extent the Interconnection Customer wants to receive Interconnection Service, the Participating TO shall construct facilities identified in Appendices A and C that the Participating TO is responsible to construct. Interconnection Service does not necessarily provide the Interconnection Customer with the capability to physically deliver the output of its Large Generating Facility to any particular load on the CAISO Controlled Grid without incurring congestion costs. In the event of transmission constraints on the CAISO Controlled Grid, the Interconnection Customer's Large Generating Facility shall be subject to the applicable congestion management procedures in the CAISO Tariff in the same manner as all other resources.

  • System Upgrades The Connecting Transmission Owner shall procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement. To the extent that design work is necessary in addition to that already accomplished in the Class Year Interconnection Facilities Study for the Interconnection Customer, the Connecting Transmission Owner shall perform or cause to be performed such work. If all the Parties agree, the Interconnection Customer may construct System Upgrade Facilities and System Deliverability Upgrades.

  • SS7 Network Interconnection 9.7.1 SS7 Network Interconnection is the interconnection of Global Connection local signaling transfer point switches or Global Connection local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Global Connection local or tandem switching systems, and other third-party switching systems directly connected to the XxxxXxxxx XX0 network.

  • Interconnection Customer Interconnection Facilities Interconnection Customer shall design, procure, construct, install, own and/or control Interconnection Customer Interconnection Facilities described in Appendix A, Interconnection Facilities, Network Upgrades and Distribution Upgrades, at its sole expense.

  • Interconnection Point The Service Provider is responsible for connecting to the LFC Network at the Interconnection Point. The LFC may only change an Interconnection Point if a change is necessary to protect the security or integrity of that Interconnection Point in order to maintain the continuity of supply of the Wholesale Services. In the event of any such change:

Time is Money Join Law Insider Premium to draft better contracts faster.