Engineering Lots Sample Clauses

Engineering Lots. For each and every engineering Lot started by Jazz as an HVL or P1 lot, produced and delivered by Jazz at the request of Skyworks, Jazz shall make and hold a backup Lot, [. . . *** . . .], like the delivered HVL or P1 Lot. Unless otherwise agreed, Jazz will start the backup Lot within [. . . *** . . .] after starting the engineering Lot. Jazz shall hold the backup Lot at Metal One for a reasonable period of time not to exceed [. . . *** . . .], and upon receipt of a PO for the purchase of the back up lot, promptly complete and deliver the lot to Skyworks. Backup lots for any production P1 lot and HVL production lot shall be by mutual agreement only.
Sample 1Sample 2
AutoNDA by SimpleDocs
Engineering Lots. Engineering Lot pricing shall include a set-up charge per lot of three-hundred and fifty dollars ($350) and a standard cost charged monthly as identified in Exhibit B.
Sample 1
Engineering Lots. Xicor may order engineering lots where Xicor seeks the qualification of an Update or a Product not previously manufactured by ZMD, to seek or otherwise improve functionality and yield, or to make any other engineering changes. For purposes of this Agreement, an engineering lot shall contain at least six wafers. It shall be Xicor's responsibility to inform and provide ZMD with the specifications for the engineering changes to be made to an engineering lot before manufacturing begins. Specifications shall be attached to, or referenced by Xicor's purchase order. Any change to the specifications shall
Sample 1
Engineering Lots. 4.1.1 For the ENGINEERING LOTS, CSI shall place an order with OKI at minimum twelve (12) WAFERS as one (1) lot or the multiples of twelve (12) per each PRODUCT, provided, however, that OKI shall not be required to engage in more than two (2) runs per month with a maximum of three (3) PRODUCTS at any time). CSI may request, and upon request by CSI OKI shall accept to split the one lot to several groups in the production process for the evaluation purpose. 4.1.2 The output will be shipped to CSI if the WAFER output is not less than nine (9) WAFERS per Lot of input quantity. If the WAFER output is less than nine (9) WAFERS per Lot of input quantity, OKI will inform CSI of the output quantity of the WAFERS and if CSI requires to have the shortage covered, OKI will re-input the WAFERS to cover the shortage of quantity. 4.1.3 Such quantity for ENGINEERING LOTS shall be counted in as part of the allocation foundry capacities provided in Section 4.2.3and 4.2.4 below.
Sample 1
Engineering Lots. HHNEC shall manufacture and deliver Engineering Lots to AOS in accordance with Schedule 3, part 2, with copies of all relevant test data sheets. During the engineering and Qualification phase, HHNEC shall provide AOS with results of PCM (Process Monitor), CP (Chip Probe) test, die-sort test and in-line monitor testing of every Lot as a partial progress report leading to the outgoing visual inspection specification. As soon as practicable after AOS’ testing of the Engineering Lots, AOS shall provide HHNEC a status update via electronic communications means. If AOS notifies HHNEC that any Wafers in an Engineering Lot are misprocessed for reasons attributable to HHNEC, HHNEC shall at its own expense use commercially reasonable efforts to rerun the Wafers and resubmit Wafers meeting the Specification and the Qualification Criteria. Before release to production, each Product shall fully meet the Qualification Criteria.
Sample 1
Engineering Lots. Minimum Engineering Lot Size: Six (6) Wafers. Cost per Engineering Lot Wafer: [***]. Engineering Lots can be staged at any step of the Process.
Sample 1
Engineering Lots. MARVELL may order engineering lots where it seeks the qualification of an update to a Product or a Product not previously manufactured by TSMC, or seeks to otherwise improve functionality and yield, or to make any other engineering changes. For purposes of this Agreement, an engineering lot shall contain 12 Wafers. It shall be MARVELL's responsibility to inform and provide TSMC with the specifications for the engineering changes to be made to an engineering lot before production begins.
Sample 1
AutoNDA by SimpleDocs

Related to Engineering Lots

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. (a) A7 to show Purchaser’s performance responsibility. (b) The Schedule of Items to include costs of survey and design, as provided under B5.24, and adjust Timber Sale Account, as provided in B5.

  • Engineering Report Lender shall have received a current Engineering Report with respect to the Property, which report shall be in form and substance reasonably satisfactory to Lender.

  • Geotechnical Engineer « »« » « » « » « » « »

  • Engineering Services Definition: Engineering Services includes any service or creative work, the adequate performance of which requires education, training and experience in the application of special knowledge in consulting, investigating, evaluating, planning and designing, engineering principles. Engineering Services covered by the Xxxxxx Architect-Engineers Act (40 U.S.C. 1102) are not covered in the primary scope of OASIS SB. Examples: Service areas that are included under the Engineering Services discipline include, but are not limited to the following: 1. Systems Engineering 2. Advanced Technology Pilots and Trials 3. Alternative Energy Sources and Engineering 4. Configuration Management 5. Concept Development

  • Architect/Engineer (A/E) means a person registered as an architect pursuant to Tex. Occ. Code Xxx., Chapter 1051, as a landscape architect pursuant to Tex. Occ. Code Xxx., Chapter 1052, a person licensed as a professional engineer pursuant to Tex. Occ. Code Xxx., Chapter 1001 and/or a firm employed by Owner or a design-build contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Reverse Engineering The Customer must not reverse assemble or reverse compile or directly or indirectly allow or cause a third party to reverse assemble or reverse compile the whole or any part of the software or any products supplied as a part of the Licensed System.

  • Value Engineering The Supplier may prepare, at its own cost, a value engineering proposal at any time during the performance of the contract. The value engineering proposal shall, at a minimum, include the following; a) the proposed change(s), and a description of the difference to the existing contract requirements; b) a full cost/benefit analysis of the proposed change(s) including a description and estimate of costs (including life cycle costs) the Procuring Entity may incur in implementing the value engineering proposal; and c) a description of any effect(s) of the change on performance/functionality.

  • Engineering Reports (a) Not less than 30 days prior to each Scheduled Borrowing Base Redetermination Date, commencing with the Scheduled Borrowing Base Redetermination to occur on or around March 15, 2007, the Borrower shall furnish to the Administrative Agent and the Lenders a Reserve Report. The Reserve Reports delivered in connection with each March 15 Scheduled Borrowing Base Redetermination, commencing March 15, 2007, shall be prepared by certified independent petroleum engineers or other independent petroleum consultant(s) acceptable to the Administrative Agent. The Reserve Reports delivered in connection with each September 15 Scheduled Borrowing Base Redetermination, commencing September 15, 2007, shall be prepared by or under the supervision of the chief engineer of the Borrower and a Responsible Officer shall certify such Reserve Report to be true and accurate and to have been prepared in accordance with the procedures used in the immediately preceding Scheduled Borrowing Base Redetermination Reserve Report. (b) In the event of an unscheduled redetermination, the Borrower shall furnish to the Administrative Agent and the Lenders a Reserve Report prepared by or under the supervision of the chief engineer of the Obligors together with the certificate of a Responsible Officer who shall certify such Reserve Report to be true and accurate and to have been prepared in accordance with the procedures used in the immediately preceding Reserve Report. For any unscheduled redetermination requested by the Lenders or the Borrower pursuant to Section 2.08(d), the Borrower shall provide such Reserve Report with an “as of” date as required by the Lenders as soon as possible, but in any event no later than 30 days following the receipt of the request by the Administrative Agent. (c) With the delivery of each Reserve Report, the Borrower shall provide, or cause to be provided, to the Administrative Agent and the Lenders, a certificate from a Responsible Officer certifying that, to the best of his knowledge and in all material respects: (i) the information contained in the Reserve Report and any other information delivered in connection therewith is true and correct, (ii) the Obligors and the Partnerships own good and marketable title to the Oil and Gas Properties evaluated in such Reserve Report and such Properties are free of all Liens except for Liens permitted by Section 9.03, (iii) except as set forth on an exhibit to the certificate, on a net basis there are no gas imbalances, take or pay or other prepayments with respect to its Oil and Gas Properties evaluated in such Reserve Report which would require any Obligor to deliver Hydrocarbons produced from such Oil and Gas Properties at some future time without then or thereafter receiving full payment therefor, (iv) none of Obligor’s or and the Partnerships’ Oil and Gas Properties have been sold since the date of the last Borrowing Base determination except as set forth on an exhibit to the certificate, which certificate shall list all of its Oil and Gas Properties sold and in such detail as reasonably required by the Administrative Agent, (v) attached to the certificate is a list of its Oil and Gas Properties added to and deleted from the immediately prior Reserve Report and a list showing any change in working interest or net revenue interest in its Oil and Gas Properties occurring and the reason for such change, (vi) attached to the certificate is a list of all Persons disbursing proceeds to the Obligors from their Oil and Gas Properties, and (vii) all of the Oil and Gas Properties evaluated by such Reserve Report are Mortgaged Property except as set forth on a schedule attached to the certificate.

  • Geotechnical Investigation Perform in accordance with the City Design Manual and other City requirements as designated in writing by the Director.

  • No Reverse Engineering You may not, and you agree not to or enable others to, copy (except as expressly permitted by this License or by the Usage Rules if they are applicable to you), decompile, reverse engineer, disassemble, attempt to derive the source code of, decrypt, modify, or create derivative works of the Apple Software or any services provided by the Apple Software, or any part thereof (except as and only to the extent any foregoing restriction is prohibited by applicable law or to the extent as may be permitted by the licensing terms governing use of open-sourced components included with the Apple Software).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!