FUEL SPECIFICATION Sample Clauses

FUEL SPECIFICATION. 4.4.1 Seller covenants that the fuel utilized by the Facility to generate the Energy delivered to Purchaser shall consist of forest residue, waste pallets, municipal wood waste, agricultural residue, wood storm debris, whole tree chips, clean construction and demolition debris, and other clean sources of wood as well as small amounts of saw dust and fines (max 10% of the total fuel supply) from mill residues. The as-received fuel shall be a three
Sample 1Sample 2
AutoNDA by SimpleDocs
FUEL SPECIFICATION. The Diesel to be supplied hereunder shall be of regular commercial grade of Diesel Fuel No. 2 and have the following specifications: Item Units Specification Limits Test Method Gravity @ 60°F °API, Specific 30.0 min., .88 min. D1298 or D4052-86 Viscosity @ 100 DF SSU 32.3 - 40.0 D445, D2161 BTU content * MM BTU/BBL 5.84 Calculated or D240 Heat Value, Net MM BTU/BBL Report Calculated or D240 Flash Point, PM °F 150 min. X00, X0000 Pour Point * °F 35 D97 Ash PPM, wt. 100 max. D482 Cetane Index 40 min. D4737 Carbon Residue, 10% Residuum %, wt. 0.35 max. D524 Sediment & Water %, vol. 0.05 max. D1796 Sulfur %, wt. 0.40 max. D1552, D2622 or D4294 Distillation 90% Recovered °F 540 - 650 D86 Sodium+Potassium PPM, wt. 0.5 max. D3605 Sodium+Pot+Lithium PPM, wt. Report D3605 Vanadium ** PPM, wt. 0.8 D3605 Nitrogen *** PPM, wt. 120 D4629 or D5762 * Typical values is shown. ** Typical values is shown. *** Typical values is shown. Diesel Confirmation Test Items: Gravity @ 60 DF, Flash Point and color to determine dye content is within legal parameters. Sulfur shall also be tested if the refinery issuing tank sulfur is higher than 0.2% Wt. Sulfur. ULTRA LOW SULFUR DIESEL SPECIFICATIONS Test Property Test Method Unit of Measure Min Max APPEARANCE (None) Visual ASH ASTM D482 % mass 0.01 CARBON RESIDUE: RAMS 10% BOTTOMS ASTM D524-04 % mass 0.35 CETANE INDEX ASTM D4737-04 Number 40.0 One of the following must be met: CETANE INDEX ASTM D976-06 Number 40.0 Or AROMATICITY ASTM D1319 Vol % 35 COPPER STRIP CORROSION: 3 HR @ 50C ASTM D130-04e1 Classification 3 DISTILLATION: 90% RECOVERED ASTM D86-07a *C 000 000 XXX XXXXX XXXXX: P-M ASTM D93-07 *C 52 FLASH POINT: P-M ASTM D93-07 *F 125 XXXXXXXXX, 00X, XXX ASTM D6079 Mcrons 520 SULFUR ASTM D5453 ppm by WT 15 CONDUCTIVITY ASTM D2624/D 4308 pS/m pr C.U. 25 VISCOSITY: KIN @ 40C ASTM D445-06 eSt 1.9 4.1 WATER & SEDIMENT ASTM D1796-04 % vol 0.05 [End of Exhibit A] EXHIBIT B (Pricing) […] […] […] […] [End of Exhibit B] EXHIBIT C (Pricing Examples) […] […] […] […] […] [End of Exhibit C]
Sample 1
FUEL SPECIFICATION. The Contractor shall: • Work with the subcontractor to collect natural gas fuel specification information indicating that the fuel being used for emissions testing meets specifications for natural gas engine certification. • Work with the subcontractor to prepare a Natural Gas Fuel Specification Report that includes fuel specification information including but not limited to: o Methane, ethane, propane, I-butane, nitrogen gas (NR2R), and carbon dioxide (COR2R) levels o Methane number (MN) determined via CARB calculations x Xxxxx Number/Index o Higher Heating Value o H/C (hydrogen to carbon) ratio Contractor Deliverables: • Natural Gas Fuel Specification Report
Sample 1
FUEL SPECIFICATION. The current European fuel specification for diesel fuel EN590 allows the blending of up to 5 vol.-% of biodiesel (B5) to fossil fuel. Biodiesel used for blending has to meet specification EN 14214 which is standard for neat biodiesel distributed in Europe. Biodiesel offered in Europe is mainly based on Rape Seed Oil Methyl Ester. However, other biomass sources (soya been oil, palm oil, sunflower oil) are increasingly used as are waste cooking oils in limited qualities.
Sample 1
FUEL SPECIFICATION. DDO FUEL SPECIFICATION --------------------------- --------------- ------------------- -------------------------- --------- ------------------- CHARACTERISTIC UNIT VALUES METHOD FREQUENCY OF TEST
Sample 1
FUEL SPECIFICATION. GASOIL (GO)
Sample 1

Related to FUEL SPECIFICATION

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • Delivery Schedule The scheduled months of delivery of the Aircraft are listed in the attached Table 1. Exhibit B describes certain responsibilities for both Customer and Boeing in order to accomplish the delivery of the Aircraft.

  • Specification Changes Upon any change in the Product Specifications, stability protocols, QC laboratory methods raw material specification or Packaging Specifications (whether initiated by Horizon or made in response to a request by sanofi-aventis that is agreed to by Horizon), including the addition of new packaging configurations, new SKUs, new formulations, or a change in either raw materials or Packaging Component supply, Horizon shall promptly advise sanofi-aventis in writing of such changes, and sanofi-aventis shall promptly advise Horizon as to any scheduling and/or price adjustments which may result from such changes. Prior to implementation of such changes, the Parties shall negotiate in good faith in an attempt to reach agreement on (a) the new Product Price for any Product which embodies such changes, (b) any amounts to be reimbursed by Horizon to sanofi-aventis as described in the next sentence of this paragraph, and (c) any other amendments to this Agreement which may be necessitated by such changes (i.e., an adjustment to the lead time for purchase orders). Horizon shall reimburse sanofi-aventis for the mutually agreed upon reasonable expenses incurred by sanofi-aventis as a result of such changes, including, but not limited to, reimbursing sanofi-aventis for its mutually agreed validation and development costs, capital expenditure costs, costs for any Packaging Components or other materials rendered unusable as a result of such changes, and cost of required stability to support a change. If during the Term Horizon amends the Product Specifications or Packaging ***Confidential Treatment Requested MANUFACTURING AND SUPPLY AGREEMENT PAGE 7 Specifications (whether voluntarily or as required by law) so as to render obsolete quantities of the Active Ingredient, Excipients and/or Packaging Components for the Product on hand at sanofi-aventis, Horizon shall (i) accept the return of all such obsolete Active Ingredient and (ii) purchase from sanofi-aventis, at sanofi-aventis’ Acquisition Cost, all such obsolete Excipients and Packaging Components obtained by sanofi-aventis pursuant to its normal procurement policies to manufacture quantities of the Product pursuant to Horizon forecasts under Section 6.1. Sanofi-aventis’ normal procurement policies for purposes of the preceding sentence of this Article 5 shall be considered to be quantities of Excipients and Packaging Components corresponding to the immediately following […***…] months of Horizon’s most recent forecasted Product demand. If a change in Specifications is initiated by sanofi-aventis and approved by Horizon, any cost associated with said change shall be borne by sanofi-aventis. In the event that a change in Specifications is initiated by Horizon or driven by a regulatory or business change, the costs associated with qualification of the change shall be paid by Horizon. The amount of the change shall be reasonable and customary and subject to written approval by Horizon, such approval not to be unreasonably withheld. Sanofi-aventis, with written agreement and approval from Horizon, will be responsible for the appropriate (cGMP) destruction of any materials covered under this Article 5, and sanofi-aventis shall be reimbursed by Horizon at the reasonable and customary approved rate.

  • Project Scope The physical scope of the Project shall be limited to only those capital improvements as described in Appendix A of this Agreement. In the event that circumstances require a change in such physical scope, the change must be approved by the District Committee, recorded in the District Committee's official meeting minutes, and provided to the OPWC Director for the execution of an amendment to this Agreement.

  • Acceptance Testing At the time of installation of a LIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.

Time is Money Join Law Insider Premium to draft better contracts faster.