LICENSOR’s Products Sample Clauses

LICENSOR’s Products. LICENSOR shall not be prohibited from licensing or similar arrangements with respect to the Technology. LICENSOR is expressly permitted to utilize its Technology on any basis it chooses, at any time, for producing and commercializing its own products.
Sample 1Sample 2See All (8)
AutoNDA by SimpleDocs
LICENSOR’s Products. Other than the restrictions associated with the Exclusivity Period, any ROFR Exclusive Period and the semi-exclusive rights, LICENSOR shall not be prohibited from licensing or similar arrangements with respect to the use of the Technology in Powder Products. LICENSOR is expressly permitted to utilize its Technology on any basis it chooses, at any time, for producing and commercializing its own products. Additionally, LICENSOR shall also have the right to produce Powder Products within the Territory and outside of the Territory for use by third parties to produce parallel end products as noted in Schedule B. In any case where the LICENSOR is producing Powder Products for the benefit of a third party purchaser, such production will constitute one of the aggregate six (6) licenses available pursuant to the semi-exclusive rights.
Sample 1
LICENSOR’s Products. The following proprietary products, commercially trademarked by Licensor, are the deliverables under this Agreement: A. Rxxxx Xxxplete (version 4.1): Our client-server based, scalable document control system. B. Rxxxx Xxxtop: Our laptop subset of Rakis Complete, based upon Access Jet. C. I-32 Forms Design (version 6.0): An Interlinq labeled version of our forms design tool to be embedded within Licensee's software for use of their end users.
Sample 1
LICENSOR’s Products. LICENSOR shall not be prohibited from (i) licensing or similar arrangements with respect to the Technology outside of the Territory, subject to the License Option set forth above; or (ii) licensing its Technology on the semi-exclusive basis provided for herein, at all times and in all locations, subject to the terms of this Agreement, including the exclusivity and semi- exclusivity provisions and License Options. Subject to its rights and obligations under this Agreement, LICENSOR is otherwise expressly permitted to utilize its Technology on any basis it chooses, at any time, for producing and commercializing its own products, provided, however, that LICENSOR would be considered as one of the four (4) permitted licensees in any Territory where LICENSEE retains semi-exclusive rights.
Sample 1
LICENSOR’s Products. The Licensor’s Products includes the MyDx Sensor and the MyDx Analyzer, an automated and portable electronic device and associated software and algorithms that can be used for the simultaneous extraction, separation, detection and reporting of compounds of interest that can be extracted from any sample and exposed to sensors for detection and analysis.
Sample 1
LICENSOR’s Products. LICENSOR shall not be prohibited from licensing or similar arrangements with respect to the Technology outside of the Jamaican Territory, subject to the Licensee’s option to license in Canada and the USA set forth within this Agreement. LICENSOR is expressly permitted to license its Technology on any basis it chooses, at any time, for producing and commercializing its own products, subject to the provisions of Subsection 2a.
Sample 1
LICENSOR’s Products. LICENSOR shall not be prohibited from (i) licensing or similar arrangements with respect to the Technology outside of the USA Territory, subject to the License Option set forth above; or (ii) licensing its Technology on the semi-exclusive basis provided for herein, at all times and in all locations, subject to the terms of this Agreement, including the exclusivity provisions and License Options. LICENSOR is expressly permitted to license its Technology on any basis it chooses, at any time, for producing and commercializing its own products, provided, however, that LICENSOR would be considered as one of the four (4) permitted licensees in the USA Territory where LICENSEE retains semi-exclusive rights.
Sample 1
AutoNDA by SimpleDocs
LICENSOR’s Products. LICENSOR shall not be prohibited from (i) licensing or similar arrangements with respect to the Technology outside of the Canada Territory, subject to the License Option set forth above; or (ii) licensing its Technology on the semi-exclusive basis provided for herein, at all times and in all locations, subject to the terms of this Agreement, including the exclusivity provisions and License Options. LICENSOR is expressly permitted to license its Technology on any basis it chooses, at any time, for producing and commercializing its own products, provided, however, that LICENSOR would be considered as one of the four (4) permitted licensees in the Canada Territory where LICENSEE retains semi-exclusive rights.
Sample 1

Related to LICENSOR’s Products

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • Sublicensees Licensee shall have the right (but not the obligation) to sublicense those rights granted to it under Section 2.1 only as set forth in, and subject to the terms and conditions of, Section 2.5 and this Section 2.3.2, to (a) any Person (other than a Specified Person) with the prior written consent of Lxxxx, which consent will not be unreasonably withheld, conditioned or delayed; provided that Licensee may contract in the ordinary course of business with any Third Party contract research organization (“CRO”) or contract development and manufacturing organization (“CMO”) to handle certain clinical Development or Manufacturing activities, in Licensee’s reasonable discretion, without requiring Lilly’s consent; provided further that such CRO or CMO are working on Licensee’s behalf, (b) any of its Affiliates (only for so long as they remain Affiliates), provided that Licensee provides prior written notice (at least 20 Business Days in advance) to Lilly of any sublicenses to be granted to any Affiliate or its request for approval of any sublicense to be granted to any other Person, which shall include in each case a description of the rights to be granted and the purpose therefor, the identity of the proposed Sublicensee and the countries involved, or (c) a Specified Person. Each Affiliate or other Person to which any such sublicense is granted is referred to herein as a “Sublicensee.” Licensee shall remain responsible for the performance by each of its Sublicensees and shall cause each of its Sublicensees to comply with the applicable provisions of this Agreement, and Licensee shall be liable for the acts or omissions of its Sublicensees under or in connection with this Agreement (as if such acts or omission were those of Licensee). Without limiting the foregoing, Licensee shall: (x) ensure that each of its Sublicensees accepts in writing all applicable terms and conditions of this Agreement, including the non-compete, reporting, audit, inspection and confidentiality provisions hereunder; (y) under the agreements between Licensee and each of its Sublicensees, include a provision pursuant to which either (a) Lilly is named as a third-party beneficiary or (b) a mechanism (for example, a power of attorney) is implemented for Lxxxx to enforce all applicable terms and conditions of this Agreement against the Sublicensee in a manner reasonably satisfactory to Lilly, provided that, in each case, Lxxxx shall not proceed against any Sublicensee unless Lxxxx has first provided Licensee with written notice of the Sublicensee’s breach and Licensee has not, within 90 days after receipt of such notice, caused the Sublicensee to cease the breaching activity or otherwise cure the breach, in each case, to the reasonable satisfaction of Lxxxx; and (z) terminate all relevant agreements with any such Sublicensee in the case of any breach of such terms and conditions by such Sublicensee. A Sublicensee shall have the right to grant further sublicenses, subject to complying with the terms of this Section 2.3.2 with respect to further Sublicensees. For the avoidance of doubt, (i) Licensee will remain directly responsible for all amounts owed to Lilly under this Agreement, and (ii) each Sublicensee is subject to the negative and restrictive covenants set forth in Sections 2.2.1 and 2.4, respectively. Licensee hereby expressly waives any requirement that Lxxxx exhaust any right, power or remedy, or proceed against a subcontractor, for any obligation or performance hereunder prior to proceeding directly against Licensee. Notwithstanding anything to the contrary, (A) all sublicenses granted hereunder shall automatically terminate upon expiration or termination of this Agreement for any reason and (B) if the Parties enter into an agreement pursuant to Section 2.5 with respect to the Product, then as of the effective date of such agreement all sublicenses granted with respect to the Product shall automatically terminate, except as otherwise mutually agreed by the Parties in writing (and in no event shall any negotiations for any such agreement pursuant to Section 2.5 be conditioned on or otherwise affected by whether Lxxxx agrees to allow any such sublicenses to continue).

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Third Party Products 12.1 Third-party products provided to you by NCR Voyix for use with your subscription to the Service are subject to any terms provided by their supplier, including but not limited to those terms and conditions set forth in the exhibits attached hereto. Third-party terms and conditions are subject to change at any time by the supplier, and you agree that your use of such third-party products and services is governed by such supplier’s terms and conditions. You hereby release NCR Voyix from any and all liability associated with any damages or claims arising out of or related to third-party products. UNLESS NCR Xxxxx SPECIFICALLY AGREES OTHERWISE IN WRITING, YOU ACKNOWLEDGE AND AGREE THAT SUCH THIRD-PARTY PRODUCTS ARE PROVIDED “AS-IS” WITHOUT A WARRANTY FROM NCR Voyix. ACCORDINGLY, NCR Voyix EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY NATURE WITH RESPECT TO ANY SUCH THIRD-PARTY PRODUCTS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD-PARTY RIGHTS. 12.2 Third-party products and services may be advertised or made available to you for purchase directly from their supplier by email or other electronic communications, including notifications made through the Service or the Account Portal. Any representations or warranties that may be provided in connection with any such third-party products or services are provided solely by their supplier. NCR Voyix will not be responsible for any of your dealings or interactions with any of those third-party suppliers.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Recycled Products The Contractor agrees to comply with all the requirements of Section 6002 of the Resource Conservation and Recovery Act (RCRA), as amended (42 U.S.C. 6962), including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order 12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part 247. References: 42 U.S.C. 6962, 40 CFR Part 247, Executive Order 12873 (More than $10,000)

  • Licensee “Licensee” means the individual or company that has entered into an Agreement with the Embassy. “Offer” means a response to a solicitation that, if accepted, would bind the offeror to perform the resultant Agreement.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!