Limitation on Impervious Surfaces Sample Clauses

Limitation on Impervious Surfaces. Impervious surfaces will not exceed [Insert approved impervious surface percentage] [Note: if greater than two percent (2%) a waiver by the Chief of NRCS or his or her authorized designee (Chief of NRCS) must have been granted in writing prior to submitting the Agricultural Land Easement to NRCS for review and approval.], of the [Insert Defined Term for Parcel], excluding NRCS-approved conservation practices developed under the Agricultural Land Easement Plan described in Section I Paragraph 1. Impervious surfaces are defined as material that does not allow water to percolate into the soil on the [Insert Defined Term for Parcel]; this includes, but is not limited to, residential buildings, agricultural buildings with or without flooring, paved areas, and any other surfaces that are covered by asphalt, concrete, or roofs. This limitation does not include public roads or other roads owned and controlled by parties with superior rights to those rights conveyed to Grantee by this Agricultural Land Easement. [Include the following if limited subdivision is permitted below: In the event the [Insert Defined Term for Parcel] is subdivided as provided for in Section I 3. (B) the total cumulative impervious surface of the subdivided parcels shall not exceed the impervious limitation referenced above. The Grantor, with Grantee approval, shall allocate the impervious surface limit among the subdivided parcels and ensure said impervious surface limitation is clearly defined in each subdivided parcel’s recorded instrument.]
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Limitation on Impervious Surfaces. Impervious surfaces will not exceed two percent (2%) of the Property, excluding NRCS-approved conservation practices. Thus, if the total area of the Property is 779 acres, as currently estimated, then the total combined area of all impervious surfaces may not exceed 15.58 acres. Impervious surfaces are defined as material that does not allow water to percolate into the soil on the Property, including but not limited to, buildings with or without flooring, paved areas, and any other surfaces that are covered by asphalt, concrete, or roofs. This limitation does not include public roads or other roads owned and controlled by parties with superior rights to those rights conveyed to Grantee by this Easement.
Sample 1

Related to Limitation on Impervious Surfaces

  • Restrictions on Use of Hazardous Substances Borrower will not cause or permit the presence, use, disposal, storage, or release of any Hazardous Substances, or threaten to release any Hazardous Substances, on or in the Property. Borrower will not do, nor allow anyone else to do, anything affecting the Property that: (i) violates Environmental Law; (ii) creates an Environmental Condition; or (iii) due to the presence, use, or release of a Hazardous Substance, creates a condition that adversely affects or could adversely affect the value of the Property. The preceding two sentences will not apply to the presence, use, or storage on the Property of small quantities of Hazardous Substances that are generally recognized to be appropriate to normal residential uses and to maintenance of the Property (including, but not limited to, hazardous substances in consumer products).

  • Storage limitation The data importer shall retain the personal data for no longer than necessary for the purpose(s) for which it is processed. It shall put in place appropriate technical or organisational measures to ensure compliance with this obligation, including erasure or anonymisation2 of the data and all back-ups at the end of the retention period.

  • Limitation on Damage In the event of a breach of any provision of this contract by the State, the liability of the State shall be limited to return of the unused initial deposit and unapplied payments to the Purchaser. The State shall not be liable for any damages, whether direct, incidental, or consequential.

  • Limitation on Use Tenant shall use the Premises solely for the Permitted Use specified in Section N of the Summary. There shall not be any change in use without the prior written consent of Landlord which will not be unreasonably withheld. Tenant shall not do anything in or about the Premises which will (i) cause structural injury to the Building, or (ii) cause damage to any part of the Building except to the extent reasonably necessary for the installation of Tenant’s Trade Fixtures and Tenant’s Alterations, and then only in a manner which has been first approved by Landlord in writing. Tenant shall not operate any equipment within the Premises which will (i) materially damage the Building or the Common Area, (ii) overload existing electrical systems or other mechanical equipment servicing the Building, (iii) impair the efficient operation of the sprinkler system or the heating, ventilating or air conditioning (“HVAC”) equipment within or servicing the Building, or (iv) damage, overload or corrode the sanitary sewer system. Tenant shall not attach, hang or suspend anything from the ceiling, roof, walls or columns of the Building or set any load on the floor in excess of the load limits for which such items are designed nor operate hard wheel forklifts within the Premises. Any dust, fumes, or waste products generated by Tenant’s use of the Premises shall be contained and disposed so that they do not (i) create an unreasonable fire or health hazard, (ii) damage the Premises, or (iii) result in the violation of any Law. Except as approved by Landlord, Tenant shall not change the exterior of the Building or install any equipment or antennas on or make any penetrations of the exterior or roof of the Building. Tenant shall not commit any waste in or about the Premises, and Tenant shall keep the Premises in a neat, clean, attractive and orderly condition, free of any nuisances. If Landlord designates a standard window covering for use throughout the Building, Tenant shall use this standard window covering to cover all windows in the Premises. Tenant shall not conduct on any portion of the Premises or the Project any sale of any kind, including any public or private auction, fire sale, going-out-of-business sale, distress sale or other liquidation sale.

  • Emergency Action on Imports of Particular Products Where any product is being imported in such increased quantities and under such conditions as to cause, or threaten to cause:

  • Limitation of Use The parties agree that this Agreement shall not be proffered by either party in another jurisdiction as evidence of any concession or as a waiver of any position taken by the other party in that jurisdiction or for any other purpose.

  • Usage Limitations Services may be subject to other limitations, such as, for example, but without limiting the generality of the foregoing, limits on disk storage space, on the number of calls You are permitted to make against Our application programming interface, and, for Services that enable You to provide public websites, on the number of page views by visitors to those websites.

  • Prohibition Against Selecting and Installing Products Containing Hazardous Materials The Contractor shall not select, install or otherwise incorporate any products or materials containing Hazardous Materials within the boundaries of the Site. Should the Contractor or any Subcontractors have knowledge that, or believe that, an item, component, material, substance, or accessory within a product or assembly selected by the Contractor or any Subcontractor may contain Hazardous Materials it is the Contractor’s responsibility to secure a written certification from the manufacturer of any suspected material which identifies the specific Hazardous Material(s) contained, together with the Material Safety Data Sheets (MSDS) for such materials which shall be submitted to the Owner and Design Professional.

  • Use Limitations Your license is solely for the purposes of creating, presenting, hosting, analyzing, viewing and delivering Events (as defined below) to Authorized Users, subject to any limitation of Seats (as defined below) specified in the Order Form. “Event” means a single live broadcast event transmitted over the SaaS Service created and/or sponsored in whole or substantial part by Customer or Customer’s employees that is branded under Customer’s name. The term “Events” shall include both live and archived Events. “Seat” means each Authorized User served by a stream of digitally encoded data that delivers an Event to such Authorized User in the SaaS Service and shall include an Authorized User’s access to live Events and archived Events but does not include an access to a downloaded archived Event. A limitation on a number of Seats limits the number of unique Authorized Users of the Service.

  • Restriction on Use The Contractor agrees that to the extent it receives or is given any information from NYSERDA or a NYSERDA contractor or subcontractor, the Contractor shall treat such data in accordance with any restrictive legend contained thereon or instructions given by NYSERDA, unless another use is specifically authorized by prior written approval of the NYSERDA Project Manager. Contractor acknowledges that in the performance of the Work under this Agreement, Contractor may come into possession of personal information as that term is defined in Section 92 of the New York State Public Officers Law. Contractor agrees not to disclose any such information without the consent of NYSERDA. CASE III: R&D-type contracts:

Time is Money Join Law Insider Premium to draft better contracts faster.