Maintenance Considerations for Erosion and Sediment Controls Sample Clauses

Maintenance Considerations for Erosion and Sediment Controls. 2.1 All erosion prevention and sediment control BMPs must be inspected to ensure integrity and effectiveness. All nonfunctional BMPs must be repaired, replaced, or supplemented with functional BMPs. The permittee(s) must comply with the following inspection and maintenance requirements: 2.1.1 All control devices similar to silt fence or fiber rolls must be repaired, replaced, or supplemented when they become nonfunctional or the sediment reaches 1/3 of the height of the device or as recommended in the manufacture’s specification (if manufacturer’s specifications are different, then a copy of the specifications should be kept with the SWPPP). Repairs and maintenance should be made within the following time frames. 2.1.1.1 Active construction sites. These repairs must be made within 24 hours of discovery, or as soon as field conditions allow access. 2.1.1.2 Inactive construction sites. These repairs must be made within 14 days of discovery, or as soon as field conditions allow access. 2.1.2 Temporary and permanent sedimentation ponds or basins must be drained and the sediment removed when the depth of sediment collected in the basin reaches 1/2 the sediment storage volume. Drainage and removal must be completed within the following time frames. 2.1.2.1 Active construction sites. Drainage and removal must be completed within 72 hours of discovery, or as soon as field conditions allow access. 2.1.2.2 Inactive construction sites. Drainage and removal must be completed within 14 days of discovery, or as soon as field conditions allow access. 2.2 Construction site egress locations must be inspected for evidence of sediment being tracked off-site by vehicles or equipment onto paved surfaces. Accumulations of tracked and deposited sediment must be removed from paved surfaces within 24 hours or, if applicable, within a shorter time if specified by local authorities or the Department. Vehicle tracking of sediment from the site must be minimized by BMPs. This may include having a designated egress with aggregate surfacing from the site, or by designating off-site parking. The permittee(s) is responsible for (or making the arrangements for) street sweeping and/or scraping if BMPs are not adequate to prevent sediment from being tracked onto the street from the site. 2.3 Vegetative buffers must be inspected for proper distribution of flows, sediment accumulation and signs of rill formation. If a buffer becomes covered with sediment, develops rills, or is otherwise render...
Sample 1
AutoNDA by SimpleDocs

Related to Maintenance Considerations for Erosion and Sediment Controls

  • Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Project Monitoring Reporting and Evaluation The Recipient shall furnish to the Association each Project Report not later than forty-five (45) days after the end of each calendar semester, covering the calendar semester.

  • Cloud Computing State Risk and Authorization Management Program In accordance with Senate Bill 475, Acts 2021, 87th Leg., R.S., pursuant to Texas Government Code, Section 2054.0593, Contractor acknowledges and agrees that, if providing cloud computing services for System Agency, Contractor must comply with the requirements of the state risk and authorization management program and that System Agency may not enter or renew a contract with Contractor to purchase cloud computing services for the agency that are subject to the state risk and authorization management program unless Contractor demonstrates compliance with program requirements. If providing cloud computing services for System Agency that are subject to the state risk and authorization management program, Contractor certifies it will maintain program compliance and certification throughout the term of the Contract.

  • Money Market Fund Compliance Testing and Reporting Services Subject to the authorization and direction of the Trust and, in each case where appropriate, the review and comment by the Trust’s independent accountants and legal counsel, and in accordance with procedures that may be established from time to time between the Trust and the Administrator, the Administrator will:

  • Solicitations for Subcontracts, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the Engineer of the Engineer's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.

  • Additional Requirements for Sleeping Rooms The Contractor shall provide departing Attendees a secured area for storing belongings.

  • REQUESTS FOR FLEXIBLE WORKING ARRANGEMENTS 49.1 Employee may request change in working arrangements s.65 of the Act. Note 1: Section 65 of the Act provides for certain Employees to request a change in their working arrangements because of their circumstances, as set out in s.65(1A).

  • Program Monitoring and Evaluation The Recipient shall prepare, or cause to be prepared, and furnish to the Association not later than six months after the Closing Date, a report of such scope and in such detail as the Association shall reasonably request, on the execution of the Program, the performance by the Recipient and the Association of their respective obligations under the Legal Agreements and the accomplishment of the purposes of the Financing.”

  • Fund Valuation and Financial Reporting Services (1) Account for Fund share purchases, sales, exchanges, transfers, dividend reinvestments, and other Fund share activity as reported by the Fund’s transfer agent on a timely basis. (2) Apply equalization accounting as directed by the Fund. (3) Determine net investment income (earnings) for the Fund as of each valuation date. Account for periodic distributions of earnings to shareholders and maintain undistributed net investment income balances as of each valuation date. (4) Maintain a general ledger and other accounts, books, and financial records for the Fund in the form as agreed upon. (5) Determine the net asset value of the Fund according to the accounting policies and procedures set forth in the Fund’s current prospectus. (6) Calculate per share net asset value, per share net earnings, and other per share amounts reflective of Fund operations at such time as required by the nature and characteristics of the Fund. (7) Communicate to the Fund, at an agreed upon time, the per share net asset value for each valuation date. (8) Prepare monthly reports that document the adequacy of accounting detail to support month-end ledger balances. (9) Prepare monthly security transactions listings.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!