Non-Conforming Satellite Production Sample Clauses

Non-Conforming Satellite Production. If Satellite Production does not conform to one or more of the operating parameters and/or specifications contained in Exhibit “G” (Host Fluid Limits/Operating Parameters) (“Non-Conforming Production”), as evidenced by at least _____ (__) fluid samples taken within a period of ___ (__) consecutive Days, and such non-conformance (i) results in incremental Host operating costs, (ii) causes a reduction in the Host Capacity, or (iii) causes other operational problems on the Host (hereinafter collectively or individually referred to as a “Satellite Operating Problem”), the Host Operator may endeavor, but the Owners are not obligated, to accept and handle such Non-Conforming Production until the Satellite Operating Problem has been rectified by the Producers in accordance with the following:
Sample 1
AutoNDA by SimpleDocs
Non-Conforming Satellite Production. If Satellite Production does not conform to one or more of the operating parameters and/or specifications contained in Exhibit “H” (Satellite Production Fluid Limits/Operating Parameters) (“Non-Conforming Production”) of this Agreement, as evidenced by at least three (3) fluid samples taken over a period of seven (7) consecutive Days, and such non-conformance (i) results in incremental Magnolia TLP operating costs, (ii) causes a reduction in the Magnolia TLP Capacity, or (iii) causes other operational problems on the Magnolia TLP (hereinafter collectively or individually referred to as a “Satellite Operating Problem”), the Magnolia TLP Operator may endeavor, but the Magnolia Owners are not obligated, to accept and handle such Non- Conforming Production until the Satellite Operating Problem has been rectified by the Producer in accordance with the following:
Sample 1

Related to Non-Conforming Satellite Production

  • Non-Conforming Product If Reliant notifies Cardinal Health during the Review Period that the Manufacturing Sample does not conform to the warranty set forth in Section 13.1 and Cardinal Health agrees with Client’s determination, Client shall not be responsible to pay for such batch (the “Defective Product”), and Cardinal Health shall, at Reliant’s option, either (A) replace any Batch of non-conforming Product, or (B) credit any payments made by Reliant for such Batch. If Cardinal Health does not agree with Reliant’s determination that such Product fails to meet the warranty set forth in Section 13.1, then after reasonable efforts to resolve the disagreement, the Parties shall cause a mutually acceptable independent third party to review records, test data and to perform comparative tests and/or analyses on the Manufacturing Sample. The results of the independent review shall be final and binding. Unless otherwise agreed to by the Parties in writing, the costs associated with such testing and review shall be borne by the non-prevailing Party. THE OBLIGATION OF CARDINAL HEALTH TO (A) REPLACE DEFECTIVE PRODUCT IN ACCORDANCE WITH THE SPECIFICATIONS OR CREDIT PAYMENTS MADE BY RELIANT FOR DEFECTIVE PRODUCT AND (B) REIMBURSE RELIANT FOR API LOST IN THE DEFECTIVE BATCH, SUBJECT TO THE LIMITATIONS IN ARTICLE 15.1, SHALL BE RELIANT’S SOLE AND EXCLUSIVE REMEDY (WITHOUT PREJUDICE TO ANY INDEMNIFICATION OBLIGATIONS UNDER SECTION 14.1 OR THE OBLIGATIONS OF SECTION 10.6 (RECALL)) UNDER THIS ARTICLE FOR DEFECTIVE PRODUCT AND IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED.

  • Warranty Period Except as may be otherwise specified or agreed, Contractor shall repair all defects in materials, equipment, or workmanship appearing within one year from the date of Substantial Completion of the Work. If Substantial Completion occurs by phase, then the warranty period for that the Work performed for each phase begins on the date of Substantial Completion of that phase, or as otherwise stipulated on the Certificate of Substantial Completion for the particular phase.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Delivery Schedule The scheduled months of delivery of the Aircraft are listed in the attached Table 1. Exhibit B describes certain responsibilities for both Customer and Boeing in order to accomplish the delivery of the Aircraft.

  • Project Schedule Construction must begin within 30 days of the date set forth in Appendix A, Page 2, for the start of construction, or this Agreement may become null and void, at the sole discretion of the Director. However, the Recipient may apply to the Director in writing for an extension of the date to initiate construction. The Recipient shall specify the reasons for the delay in the start of construction and provide the Director with a new start of construction date. The Director will review such requests for extensions and may extend the start date, providing that the Project can be completed within a reasonable time frame.

  • Defective Product Seller must guarantee a return for all defective products. a) Goods rejected by Buyer for whatever reason shall be held, transported and/or stored at Seller’s sole expense. Seller shall promptly reimburse Buyer for any such expenses. B) Defective product purchase COD will be returned COD to Seller or COD check will be cancelled, at Buyer’s discretion. c) Seller is responsible for all costs associated RoHS noncompliance returns and will accept a full return for all parts not meeting RoHS compliance criteria if necessary. d) Seller is 100% responsible for all monetary and/or rework costs associated with product failures in addition to any further cost whatsoever associated with product failures. e) If suspect parts/counterfeit parts are furnished under this agreement such parts shall be impounded by Buyer. Buyer may provide a sample batch Supplier for verification and authentication. In addition, Buyer reserves the right to send such items to the appropriate manufacturer and appropriate authorities for investigation. f) Seller shall be liable for all costs relating to impound, investigation, removal, or replacement of suspect/counterfeit parts.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Shipment Dell will ship the APEX System to the Site when included as part of the APEX Service. The terms and process for shipment and delivery of the APEX System will be stated in the applicable Service Offering Description.

  • Production Work The Company may use Outside Entities to perform production work outside the plant and its environs provided the Company demonstrates that it is utilizing plant equipment to the maximum extent consistent with equipment capability and customer requirements and the Company is making necessary capital investments to remain competitive in the steel business and is in compliance with Article Eleven, Section B (Investment Commitment).

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

Time is Money Join Law Insider Premium to draft better contracts faster.