NON-ROUTINE SCHEDULED MAINTENANCE Sample Clauses

NON-ROUTINE SCHEDULED MAINTENANCE. Non-routine scheduled maintenance consists of corrective repairs or maintenance work identified during the routine OM&M inspections and site visits. The work shall consist of, but is not limited to, items such as repair of broken valves, replacement of torn flex hoses, and repair of damaged conveyance piping and relocation of header due to landfilling operations. This work is essential for proper system operation; however, it is considered the type of work that can be scheduled to allow for procurement of materials, equipment, and scheduling of personnel. Non-routine scheduled maintenance shall be performed only after receipt of, or with the prior written authorization from the OC Waste & Recycling Project Manager (or his designee). The following list presents activities expected to be non-routine occurrences:  Thermocouple replacement;  Blower belt replacement;  UV scanner replacement;  Flare refractory repair or replacement;  Flare Coating repair;  Flare burner repair or replacement;  Air Compressor equipment repairs;  Well head replacement;  Well valve replacement;  Well extension, abandonment and capping;  Installation of temporary condensate tanks;  Replacement of Flex Hose(s);  Well service removal and re-installation;  Header removal and re-installation;  Knockout vessel demister pad cleaning; and  Equipment removal, installation and replacement.  Schematic sketches for cost estimating
AutoNDA by SimpleDocs
NON-ROUTINE SCHEDULED MAINTENANCE. Non-routine scheduled maintenance consists of corrective repairs or maintenance work identified during the routine OM&M inspections and site visits. The work shall consist of, but is not limited to, items such as repair of broken valves, replacement of torn flex hoses, and repair of damaged conveyance piping and relocation of header due to landfilling operations. This work is essential for proper system operation; however, it is considered the type of work that can be scheduled to allow for procurement of materials, equipment, and scheduling of personnel. Non-routine scheduled maintenance shall be performed only after receipt of, or with the prior written authorization from the PM (or his designee). The following list presents activities expected to be non-routine occurrences: • Thermocouple replacement (Xxxxxxxx Canyon Only) • Blower belt replacement (Xxxxxxxx Canyon Only) • UV scanner replacement (Xxxxxxxx Canyon Only) • Flare refractory repair or replacement (Xxxxxxxx Canyon Only) • Flare coating repair (Xxxxxxxx Canyon Only) • Flare burner repair or replacement (Xxxxxxxx Canyon Only) • Air compressor equipment repairs (Xxxxxxxx Canyon Only) • Well head and appurtenance replacement • Well extension, capping and abandonment • Installation of temporary condensate tanks • Well service removal and re-installation • Subsurface monitoring probe installation and abandonment • Header removal and re-installation • Installation of new headers to maintain compliance • Knockout vessel demister pad cleaning • Equipment removal, installation and replacement • Annual Source Testing (Xxxxxxxx Canyon LFGCCS only) • Condensate removal and maintenance of condensate components • Installation of horizontal/vertical collectors

Related to NON-ROUTINE SCHEDULED MAINTENANCE

  • Scheduled Maintenance Maintenance window for disruptive work to Service will be limited 12:00 A.M. to 4:00 A.M., Central Daylight Time (CDT), any day with requirement of one (1) calendar week notification to Customer prior to maintenance. LightEdge will send an e-mail notification of such disruptive maintenance to Service to Authorized Contacts of Customer. Once notification is sent to Customer this will be considered a “Scheduled Maintenance”. Any Service SLAs will NOT apply during a Scheduled Maintenance.

  • Unscheduled Maintenance Unscheduled maintenance may be required to resolve issues that are critical for Customer and/or performance of the Cloud Services. Druva will use its commercially reasonable efforts to notify Customer at least six (6) hours prior to the unscheduled maintenance.

  • Planned Maintenance (a) Sellers may designate up to twenty (20) Days of Planned Maintenance on Sellers’ Facilities during each Contract Year. Sellers shall be entitled to reduce (including down to zero (0)) its Gas scheduling under Clause 8 and Exhibit 3 for each Day of Planned Maintenance.

  • Maintenance Scheduling The NTO shall schedule maintenance of its facilities designated as NTO Transmission Facilities Under ISO Operational Control and schedule any outages (other than forced transmission outages) of said transmission system facilities in accordance with outage schedules approved by the ISO. The NTO shall comply with maintenance schedules coordinated by the ISO, pursuant to this Agreement, for NTO Transmission Facilities Under ISO Operational Control. The NTO shall be responsible for providing notification of maintenance schedules to the ISO for NTO Transmission Facilities Requiring ISO Notification. The NTO shall provide notification of maintenance schedules to affected Transmission Owners for NTO Transmission Facilities Requiring ISO Notification and Local Area Transmission Facilities pursuant to Section 3.5.3 of the ISO Services Tariff.

  • MAINTENANCE WORK Landlord reserves the right from time to time, but subject to payment by and/or reimbursement from Tenant as otherwise provided herein: (i) to install, use, maintain, repair, replace, relocate and control for service to the Premises and/or other parts of the Project pipes, ducts, conduits, wires, cabling, appurtenant fixtures, equipment spaces and mechanical systems, wherever located in the Premises or the Project, (ii) to alter, close or relocate any facility in the Premises or the common areas or otherwise conduct any of the above activities for the purpose of complying with a general plan for fire/life safety for the Project or otherwise, and (iii) to comply with any federal, state or local law, rule or order. Landlord shall attempt to perform any such work with the least inconvenience to Tenant as is reasonably practicable, but in no event shall Tenant be permitted to withhold or reduce Basic Rental or other charges due hereunder as a result of same, make any claim for constructive eviction or otherwise make any claim against Landlord for interruption or interference with Tenant's business and/or operations.

  • Maintenance Outages If Seller reasonably determines that it is necessary to schedule a Maintenance Outage, Seller shall notify Buyer of the proposed Maintenance Outage at least five (5) days before the outage begins (or such shorter period to which Buyer may reasonably consent in light of then existing conditions). Upon such notice, the Parties shall plan the Maintenance Outage to mutually accommodate the reasonable requirements of Seller and the service obligations of Buyer; provided, however, that, unless Buyer otherwise consents, such consent not to be unreasonably withheld, no Maintenance Outage may be scheduled between the hour ending 0700 through the hour ending 2200, Monday through Saturday, during the time period commencing on May 15 and concluding on September 15. Notice of a proposed Maintenance Outage shall include the expected start date and time of the outage, the amount of Capacity of the Facility that will not be available, and the expected completion date and time of the outage. Seller shall give Buyer notice of the Maintenance Outage as soon as Seller determines that the Maintenance Outage is necessary. Buyer shall promptly respond to such notice and may request reasonable modifications in the schedule for the outage. Seller shall use all reasonable efforts to comply with any request to modify the schedule for a Maintenance Outage. Seller shall notify Buyer of any subsequent changes in Capacity available to Buyer or any changes in the Maintenance Outage completion date and time. As soon as practicable, any notifications given orally shall be confirmed in writing. Seller shall take all reasonable measures and exercise its best efforts in accordance with Prudent Electrical Practices to minimize the frequency and duration of Maintenance Outages.

  • System Maintenance The Trust understands that USBFS will perform periodic maintenance to the System(s), which may cause temporary service interruptions. To the extent possible, USBFS shall notify the Trust of all planned outages and will perform any necessary maintenance during non-business hours.

  • Repairs and Maintenance The Tenant shall (a) take good care of the Apartment and all equipment and fixtures in it; (b) promptly make all necessary repairs and replacements whenever the need results from the Tenant's act of neglect or the neglect of Tenant’s family members, guests, visitors or contractors (if consented to by Landlord); (c) keep the Apartment and any other part of the building used by the Tenant as clean and safe as possible; and (d) promptly notify the Landlord when there are conditions which need repair. Landlord shall have a reasonable amount of time to make repairs. Tenant shall be responsible for reimbursing the Landlord for the cost of any repairs that are not "normal wear and tear" repairs, any such costs shall be considered additional rent; (e) shall not attach to, hang from or place anything on the railings of the patio or deck; and ( f ) Tenant agrees not to install any partition walls. No outside contractor is authorized to perform any services at the Apartment or apartment complex unless approved in writing by a representative of the Landlord. If Tenant contracts for any such services without written consent of the Landlord, Tenant shall be wholly responsible for the payment for any such service and shall hold the Landlord harmless against any claim made by a contractor who performs any such service at the request of the Tenant. Tenant shall also be responsible for returning the apartment back to its original condition, or else shall be liable to the Landlord for the costs incurred for the Landlord to do so after Tenant vacates.

  • Routine Maintenance (i) CRC shall be responsible for Routine Maintenance when necessary or desirable to maintain the Shared Assets in a safe operating condition, and to permit and facilitate (A) the performance by CRC of its obligations pursuant to this Agreement, and (B) the use of Shared Assets by the Operators in accordance with this Agreement.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

Time is Money Join Law Insider Premium to draft better contracts faster.