PROMOTIONS AND STAFF CHANGES 11.01 Job Postings a) When a vacancy occurs or a new position is created for a regular position which the Employer has decided to fill it shall be posted on all bulletin boards for five (5) working days and filled within forty (40) working days of the posting closing. Positions may be advertised in the media only after the Employer has determined an internal applicant is not the successful applicant. Where the Employer decides not to fill a vacant position, the Employer will provide an explanation to the Union if so requested. b) The Employer, on a temporary basis, may fill a posted position during the posting and selection period. c) For temporary positions of up to forty-two (42) days, a posting is not required. Positions of longer than forty-two (42) days (seventy-eight (78) days only in the case of temporary aquatic program positions) shall be posted except where the vacancy is created by the absence of an Employee due to vacation. d) If a temporary position is made into a regular position, the new regular position shall be posted at least 14 days prior to the end of the temporary position. (i) A posting shall include the following information: Nature of position, qualifications, skills, required knowledge and education, current shift hours and days, number of hours of work per week, and wage rate. (ii) Such qualifications may not be established in an arbitrary or discriminatory manner, and shall reflect the contents of the Job Description. 11.02 Role of Seniority in Appointments, Promotions, Demotions and Transfers a) Both parties recognize the principle of promotion within the service of the Employer in the bargaining unit (i) For classifications required by their job description to supervise other employees in the bargaining unit listed in XXX#4, appointments, promotions, demotions, and transfers shall be based on the ability, knowledge, qualifications and seniority of the Regular Employees considered. Where the ability, qualifications and knowledge of the applicants are relatively equal, the senior applicant will be the successful candidate. (ii) For all other classifications, where the ability, qualifications and knowledge are sufficient to perform the functions of the posted position, the senior applicant shall be appointed. c) If the position is not filled by a Regular Employee in (i) or (ii) above, the ability and qualifications of Casual, Temporary and Seasonal Employees shall be considered, and if relatively equal, the senior applicant as determined in Article 10.05 shall be appointed. d) If the position is not filled by an Employee in b (i), (ii), or c) above, all other applicants shall be considered.
Subcontracts and Staff 4.1 The Contractor is fully responsible for satisfactory completion of all work on this Contract. The Contractor shall ensure and provide assurances to the Department or Customer upon request, that any subcontractor(s) or Staff provided under this Contract has the necessary qualifications and abilities to perform in accordance with the terms and conditions of this Contract. The Contractor must provide the Customer with the names of Staff considered for work on a purchase order issued under this Contract. The Customer shall retain the right to reject any Staff whose qualifications or performance, in the Customer’s exclusive judgment, is insufficient. 4.2 The Contractor agrees to be responsible for all work performed and all expenses incurred by subcontractors and Staff while performing work under this Contract. 4.3 Any subcontract or Staff arrangements must be evidenced by a written document available to the Department or Customer. 4.4 The Contractor agrees to make payments to the subcontractor or Staff within seven working days after receipt of full or partial payments from the Customer in accordance with Section 287.0585, F.S., unless otherwise stated in the contract between Contractor and subcontractor or required by law. 4.5 The Contractor agrees that neither the Department nor the Customer shall be liable to any subcontractor or Staff for any expenses or liabilities incurred in furtherance of this Contract, and Contractor shall be solely liable to the subcontractor and Staff for all expenses and liabilities incurred under the Contractor’s contract or subcontract. The Contractor, at its expense, shall defend the Customer and the Department against any subcontractor or Staff claims regarding compensation or payment. 4.6 The Department supports diversity in its procurements and contracts, and requests that Contractors who engage in subcontracting offer subcontracting opportunities to certified woman-, veteran-, and minority-owned small businesses. The Contractor may contact the Office of Supplier Diversity at xxxxxxx@xxx.xxxxxxxxx.xxx for information on certified business enterprises available for subcontracting opportunities.
Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.
Accessories, Spare Parts and Tools Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.
LICENSES AND STANDARDS 11 CONTRACTOR warrants that it and its personnel, described in Paragraph 27 of 12 this Agreement, who are subject to individual registration and/or licensing requirements, have all 13 necessary licenses and permits required by the laws of the United States, State of California 14 (hereinafter referred to as “State”), County of Orange, and all other appropriate governmental 15 agencies to perform the services described in this Agreement, and agrees to maintain, and require 16 its personnel to maintain, these licenses and permits in effect for the duration of this Agreement.
SUPERVISION AND CONSTRUCTION PROCEDURES 4.3.1 The Contractor shall supervise and direct the Work, using his / her best skill and attention. The Contractor shall be solely responsible for all construction means, methods, techniques, sequences and procedures and for coordinating all portions of the Work under the Contract. All aspects of the Project shall be subject to the inspection and approval of the State. Contractor guarantees to repair, replace, re-execute or otherwise correct any defect in workmanship, materials, or the like that fails to conform to the requirements of this Contract or that appears during the progress of the Work or within one year of final acceptance by the State. 4.3.2 The Contractor shall be responsible to the State for the acts and omissions of his / her employees, Subcontractors and their agents and employees, and other persons performing any of the Work under a contract with the Contractor. 4.3.3 The Contractor shall not be relieved from his / her obligations to perform the Work in accordance with the Contract Documents either by the activities or duties of the Architect in his / her administration of the Contract, or by inspections, tests or approvals required or performed under Paragraph 7.7 by persons other than the Contractor. 4.3.4 The Contractor shall acquaint himself (herself / itself) with the limits of the property or right- of-way of the State and shall not trespass on other property. The Contractor shall adequately protect the project, adjacent property and the public, and shall be responsible for any damage or injury due to the Contractor’s act or neglect, and shall save the State harmless in respect thereto. 4.3.5 All work shall be done in such a manner as not to interfere with the State’s operating functions. Contractor and his employees shall familiarize themselves and comply with all rules and regulations applicable to the project. 4.3.6 The Contractor shall keep the premises free from liens arising out of or from the Project. Contractor shall obtain and submit waivers of liens with a request for a progress or final payment.
Interconnection Facilities Engineering Procurement and Construction Interconnection Facilities, Network Upgrades, and Distribution Upgrades shall be studied, designed, and constructed pursuant to Good Utility Practice. Such studies, design and construction shall be based on the assumed accuracy and completeness of all technical information received by the Participating TO and the CAISO from the Interconnection Customer associated with interconnecting the Large Generating Facility.
PRE-CONSTRUCTION PHASE SERVICES The Pre-Construction Phase shall be deemed to commence upon the date specified in a written Notice to Proceed with Pre-Construction Phase Services issued by Owner and shall continue through completion of the Construction Documents and procurement of all major Subcontractor agreements. Contractor is not entitled to reimbursement for any costs incurred for Pre-Construction Phase Services performed before issuance of the written Notice to Proceed. Pre-Construction Phase Services may overlap Construction Phase Services. Contractor shall perform the following Pre-Construction Phase Services:
Specifications and Standards a) All articles supplied shall strictly conform to the specifications, trademark laid down in the bidding document and wherever articles have been required according to ISI/ ISO/ other applicable specifications/ certifications/ standards, those articles should conform strictly to those specifications/ certifications/ standards. The supply shall be of best quality and description. The decision of the competent authority/ purchase committee whether the articles supplied conforms to the specifications shall be final and binding on the supplier/ selected bidder.
Agents and Subcontractors The MCP, in compliance with 45 CFR 164.502(e)(1)(ii) and 164.308(b)(2) as applicable, shall ensure all its agents and subcontractors that create, receive, maintain, or transmit PHI from or on behalf of the MCP and/or ODM agree to have, in a written agreement, the same restrictions, conditions, and requirements that apply to the MCP with respect to the use or disclosure of PHI.
