PERIODIC VISUAL INSPECTIONS Sample Clauses

PERIODIC VISUAL INSPECTIONS. The Concessionaire will carry out visual inspections to identify line sections showing high levels of surface contamination in conductors and chains of insulators. Inspections shall cover the entire length of the line and this shall be carried out at least once a year. OSINERGMIN has the power to witness inspections and request their repetition, if necessary, in order to verify the reported contamination level. The levels of conductor and insulator contamination will be classified as Low, Medium and High, pursuant to Table N ° 1. The procedure for these visual inspections is as follows: a) Inspections will be carried out by specialists in transmission lines, equipped with safety equipment, binoculars and a digital camera with date stamp. b) Inspections will be carried out only during the day, with the presence of sunlight, absence of rain, low humidity and no strong winds. c) The technician in charge of the inspection shall be located on the ground at a distance of 30 to 50 meters from the line axis; using binoculars, the technician will observe contamination accumulation on the surface of conductors and insulators in the three phases of the span. If necessary, he/she will carry out the inspection climbing up to the line structure. d) Particular attention must be paid to the installation points of spacers and dampers, in order to verify conductor condition at attachment points. e) According to Table 1, the technician will rate and record the conductor and insulator contamination level in the logbook. f) If contamination level is Medium High, the technician will take a photographic record. g) The steps indicated in (c) to (f) shall be repeated for each of the other spans of the inspected line until 100% of the sections to be inspected are completed. h) The Concessionaire will verify the contamination rating reports and group the sections by contamination levels of. If there are observations on the rating, reassign the correct rating by using the photograph or, if such is the case, a new field inspection will be carried out. Level Visual aspect Description Low Minimum contamination, there are no accumulation spikes Medium Visible contamination with small contamination spikes along the conductor High Visible contamination with large accumulation spikes Visual inspection reports will be submitted to OSINERGMIN.
AutoNDA by SimpleDocs

Related to PERIODIC VISUAL INSPECTIONS

  • Final Inspection The Contractor shall complete the list of items identified on the Pre-Final Punchlist prior to requesting a Final Inspection. Unless otherwise specified, or otherwise agreed in writing by the parties as documented on the Certificate of Substantial Completion, the Contractor shall complete and/or correct all Work within thirty (30) days of the Substantial Completion date. Upon completion of the Pre-Final Punchlist work, the Contractor shall give written notice to the ODR and A/E that the Work will be ready for Final Inspection on a specific date. The Contractor shall accompany this notice with a copy of the updated Pre-Final Punchlist indicating resolution of all items. On the date specified or as soon thereafter as is practicable, the ODR, A/E and the Contractor will inspect the Work. The A/E will submit to the Contractor a Final Punchlist of open items that the inspection team requires corrected or completed before final acceptance of the Work. 12.1.2.1 The Contractor must correct or complete all items on the Final Punchlist before requesting Final Payment. Unless otherwise agreed to in writing by the parties, complete this work within seven (7) days of receiving the Final Punchlist. Upon completion of the Final Punchlist, the Contractor shall notify the A/E and ODR in writing stating the disposition of each Final Punchlist item. The A/E, Owner and Contractor shall promptly inspect the completed items. When the Final Punchlist is complete, and the Contract is fully satisfied according to the Contract Documents the ODR will issue a certificate establishing the date of Final Completion. Completion of all Work is a condition precedent to the Contractor's right to receive Final Payment.

  • Goods Inspection The Commissioner of DAS, in consultation with the Client Agency, shall determine the manner and prescribe the inspection of all Goods and the tests of all samples submitted to determine whether they comply with all of the specifications in the Contract. If any Goods fail in any way to meet the specifications in the Contract, the Client Agency or the Commissioner of DAS may, in its sole discretion, either reject it and owe nothing or accept it and pay for it on an adjusted price basis, depending on the degree to which the Goods meet the specifications. Any decision pertaining to any such failure or rejection shall be final and binding.

  • Safety Inspection During inspection of County facilities conducted by the State Division of Occupational Safety and Health for the purpose of determining compliance with the California OSHA requirements, an OCEA designated employee shall be allowed to accompany the inspector while the inspector is in the employee's agency/department. The employee so designated shall suffer no loss of pay when this function is performed during the employee's regularly scheduled work hours.

  • Physical Inspection Subject to the limitations set forth in this Section 4.1(c) and notwithstanding any provision to the contrary in this Agreement, commencing on the Effective Date and continuing through the Closing or any earlier termination of this Agreement, Buyer shall have the right, at Buyer’s expense, to make inspections (including tests, surveys and other studies) of the Real Property and all matters relating thereto, including, but not limited to, soils and geologic conditions, location of property lines, utility availability and use restrictions, environmental conditions, the manner or quality of the construction of the Improvements, the habitability, merchantability, marketability, profitability or fitness for a particular purpose of the Real Property, the effect of applicable planning, zoning and subdivision statutes, ordinances, regulations, restrictions and permits, the character and amount of any fees or charges that must be paid to further develop, improve and/or occupy the Real Property and all other matters relating to the Real Property. Prior to Closing, Buyer and its agents, contractors and subcontractors shall have the right to enter upon the Real Property, at reasonable times during ordinary business hours, to make inspections and tests as Buyer deems reasonably necessary and which may be accomplished without causing any material damage to the Real Property including, without limitation, the right to conduct a phase I environmental audit and an investigation with respect to the Real Property’s compliance with the requirements of Title III of the Americans with Disabilities Act of 1990. Notwithstanding the foregoing, in no event shall Buyer, its agents, contractors or subcontractors conduct any invasive testing on the Real Property without Seller’s prior written approval, which approval shall not be unreasonably withheld, conditioned or delayed. Buyer shall not materially interfere with any Tenant, occupant or invitee of the Real Property in making such inspections or tests, and shall return and restore the Property to substantially its original condition prior to such inspections or tests. Buyer shall not permit any liens or encumbrances to be placed against the Real Property in connection with Buyer’s investigation and inspection of the Real Property and/or in connection with Buyer’s activities on the Real Property. Buyer hereby agrees to and shall indemnify, defend and hold harmless Seller and Seller’s members, managers, partners, officers, directors, shareholders, employees, agents, representatives, invitees, successors and assigns (each, a “Seller Group Indemnitee”), from and against any and all claims, demands, and causes of action for personal injury or property damage, and all damages, judgments, liabilities, costs, fees and expenses (including reasonable attorneys’ fees) resulting therefrom, arising out of any entry onto the Real Property by Buyer, its agents, employees, contractors and/or subcontractors, pursuant to this Section 4.1(c) hereof, provided, however, Buyer shall not be obligated to indemnify, defend or hold harmless Seller or any Seller Group Indemnitee for any such claims, demands and/or causes of action or any such damages, judgments, liabilities, costs, fees or expenses caused by: (i) the discovery of conditions that were present before Buyer or its representatives entered onto the Real Property, or the accidental or inadvertent release of any Hazardous Materials that were in, on or under the Real Property prior to such entry; or (ii) the negligent or willful misconduct of Seller or any Seller Group Indemnitee. The covenants, agreements and obligations of Buyer set forth in this Section 4.1(c) shall survive the termination of this Agreement and the Closing, as applicable.

  • IN INSPECTION Before, at the time of the Tenant accepting possession, or shortly thereafter, the Landlord and Tenant: (check one)

  • Tests and Inspections § 15.5.1 Tests, inspections and approvals of portions of the Work shall be made as required by the Design-Build Documents and by applicable laws, statutes, ordinances, codes, rules and regulations or lawful orders of public authorities. Unless otherwise provided, the Design-Builder shall make arrangements for such tests, inspections and approvals with an independent testing laboratory or entity acceptable to the Owner, or with the appropriate public authority, and shall bear all related costs of tests, inspections and approvals. The Design-Builder shall give the Owner timely notice of when and where tests and inspections are to be made so that the Owner may be present for such procedures. The Owner shall bear costs of (1) tests, inspections or approvals that do not become requirements until after bids are received or negotiations concluded, and (2) tests, inspections or approvals where building codes or applicable laws or regulations prohibit the Owner from delegating their cost to the Design-Builder. § 15.5.2 If the Owner determines that portions of the Work require additional testing, inspection or approval not included under Section 15.5.1, the Owner will instruct the Design-Builder to make arrangements for such additional testing, inspection or approval by an entity acceptable to the Owner, and the Design-Builder shall give timely notice to the Owner of when and where tests and inspections are to be made so that the Owner may be present for such procedures. Such costs, except as provided in Section 15.5.3, shall be at the Owner’s expense. § 15.5.3 If such procedures for testing, inspection or approval under Sections 15.5.1 and 15.5.2 reveal failure of the portions of the Work to comply with requirements established by the Design-Build Documents, all costs made necessary by such failure shall be at the Design-Builder’s expense. § 15.5.4 Required certificates of testing, inspection or approval shall, unless otherwise required by the Design-Build Documents, be secured by the Design-Builder and promptly delivered to the Owner. § 15.5.5 If the Owner is to observe tests, inspections or approvals required by the Design-Build Documents, the Owner will do so promptly and, where practicable, at the normal place of testing. § 15.5.6 Tests or inspections conducted pursuant to the Design-Build Documents shall be made promptly to avoid unreasonable delay in the Work.

  • Inspections The Servicer shall inspect the Mortgaged Property as often as deemed necessary by the Servicer in accordance with Accepted Servicing Practices to assure itself that the value of the Mortgaged Property is being preserved. In addition, if any Mortgage Loan is more than 45 days delinquent, the Servicer promptly shall inspect the Mortgaged Property and shall conduct subsequent inspections in accordance with Accepted Servicing Practices or as may be required by the primary mortgage guaranty insurer. Upon request, the Servicer shall produce an electronic report of each such inspection.

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

  • Audits/Inspections Contractor agrees to permit the County’s Auditor-Controller or the Auditor- Controller’s authorized representative (including auditors from a private auditing firm hired by the County) access during normal working hours to all books, accounts, records, reports, files, financial records, supporting documentation, including payroll and accounts payable/receivable records, and other papers or property of Contractor for the purpose of auditing or inspecting any aspect of performance under this Contract. The inspection and/or audit will be confined to those matters connected with the performance of the Contract including, but not limited to, the costs of administering the Contract. The County will provide reasonable notice of such an audit or inspection. The County reserves the right to audit and verify the Contractor’s records before final payment is made. Contractor agrees to maintain such records for possible audit for a minimum of three years after final payment, unless a longer period of records retention is stipulated under this Contract or by law. Contractor agrees to allow interviews of any employees or others who might reasonably have information related to such records. Further, Contractor agrees to include a similar right to the County to audit records and interview staff of any subcontractor related to performance of this Contract. Should the Contractor cease to exist as a legal entity, the Contractor’s records pertaining to this Contract shall be forwarded to the County’s project manager.

  • Records; Inspection Reneo shall, and shall cause its Affiliates and Sublicensees to, keep complete, true and accurate books of account and records for the purpose of determining the payments to be made under this Agreement. Such books and records shall be kept for [***] years following the end of the calendar year to which they pertain. Such records shall be open for inspection during such period by independent accountants, solely for the purpose of verifying payment statements hereunder for a period covering not more than the [***] prior to the date of request; provided that no period shall be subject to inspection under this section more than once. Such inspections shall be made no more than once each calendar year, on reasonable notice during normal business hours. The auditor will execute a reasonable written confidentiality agreement with Reneo and will disclose to vTv only such information as is reasonably necessary to provide vTv with information regarding any actual or potential discrepancies between amounts reported and actually paid and amounts payable under this Agreement. The auditor will send a copy of the report to Reneo at the same time it is sent to vTv. The report sent to both Parties will include the methodology and calculations used to determine the results. Any unpaid amounts (plus interest as set forth in Section 3.8) that are discovered shall be paid promptly by Reneo. Inspections conducted under this Section 3.9 shall be at the expense of vTv, unless the inspection discloses an underpayment by Reneo of [***] or more of the amount due for any period covered by the inspection, whereupon all costs relating to the inspection for such period shall be paid promptly by Reneo. If an inspection conducted pursuant to this Section 3.9 discloses an overpayment by Reneo, then Reneo will deduct the amount of such overpayment from amounts otherwise owed to vTv under this Agreement, unless no further payments are due hereunder, in which case the amount of such overpayment shall be refunded by vTv to Reneo.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!