Bidding Phase 2.8.1 The Professional, following the Owner's approval of the Construction Document Phase, shall assist the Owner in obtaining bids and in award and preparation of Construction Contracts.
2.8.2 The Professional shall attend the bid opening and furnish a suitably detailed tabulation sheet for recording the name of each Bidder, the Bidder's Certificate of Responsibility Number, Bid Security, Base Bid, Alternates, and remarks. The Professional shall furnish sufficient tabulation sheets for all in attendance. Immediately after receipt of bids, the Professional shall submit to the Owner a certified tabulation of all bids received, along with his recommendation as to Contract award.
2.8.3 The Professional, following the award of a Construction Contract, shall prepare and submit to the Owner, two (2) copies of updated Construction Documents (Plans/Specifications). Each copy shall be marked OFFICIAL CONTRACT DOCUMENTS and shall include an executed bid Proposal Form, Agreement Form, Contract Bond, Power of Attorney, Certificate of Insurance, all bulletins, Addenda, and supplemental Drawings. One (1) copy shall be retained by the Owner, one (1) copy shall be for the Contractor. Any other contract document guidelines will be distributed to the Professional at the bid opening.
2.8.4 The Professional shall also furnish the area and volume of the building computed in accordance with criteria of the American Institute of Architects; and the square foot and cubic foot costs of only the building, the mechanical system, the electrical system, special built-in equipment, and the total Project cost.
2.8.5 The Professional shall, unless waived by the Owner, also submit one electronic format copy of the updated Contract Documents (plans and specifications) in coordination with said Contract Documents in 2.8.3 above. Said electronic submittal to be submitted within thirty (30) days after award by Owner in .pdf format. The actual cost of the electronic submittal shall be paid by the Owner, with cost approval by the Owner before printing is ordered in accordance with 3.4.
Shift Bidding 1. Commencing October 1 of each calendar year, shift bids will be open for the following year. The selection of work shifts will be made by the seniority bid process. Those with the highest seniority will bid first among their job classification within the Patrol Division. Seniority will be based on hire date to, or promotion date of, your job classification. Positions include Patrol Officer and Patrol Sergeant. Shifts will be bid for an entire calendar year with markup changes on January 1, April 1, July 1, and October 1. Each Employee will be allotted a maximum of two (2) work days after notification to complete his/her bidding.
2. Shift selection shall be assigned through the seniority bidding process for all Guild members, excluding probationary officers. The Chief of Police shall have exclusive discretion to assign probationary officers to shifts based upon a need to further training, to evaluate and to meet departmental needs. Probationary assignments shall be made without altering non-probationary officer(s) shift bids if at all possible. In the event non- probationary officer(s) bid upon shifts are changed, the shift re-bid process defined in Article 8 (D) shall apply. Upon completion of probation, an officer will then be included in the seniority bidding process based upon their original date of hire. (prior MOU draft)
3. The Chief of Police retains the exclusive right to determine the starting time of the work shifts and the number of shifts in a work day; provided that in the event that an Employee’s routine shift starting time is changed by more than two (2) hours and/or the Employee’s routine work days are changed after the bidding process, the Department must provide notice of the shift changes in accordance with Article 8 (F) and must allow for the opportunity of a shift rebid process.
4. This section shall be interpreted as a waiver of the Guild’s right to bargain changes in the starting times of work shifts in accordance with its terms, but shall not be considered a waiver of the Guild’s right to require the Employer to bargain over changes in the length of the work shifts, for example, five 8’s, four 10’s, 10:40’s, 11:25’s, 12’s, etc.
JOB BIDDING Section 1. All job vacancies will be posted as follows:
a.) The position will be posted on Kaleidascope for seven (7) calendar days.
b.) The posting shall include the position (job title), posting dates, status, hours per pay period, shift, starting and ending times, pay grade and the qualifications for the position as defined in the job description for the position. A copy of all job postings will be sent to the Union.
c.) Employees may not be accepted for posted positions until they have completed six (6) months of employment. In addition, an employee who has transferred to a position must remain in that position for six (6) months before applying for another posted position. Except that an employee may apply for a posted position which is at a higher pay grade without regard to the six (6) month limit. This paragraph shall not apply to intra cost center shift change or intra cost center status changes.
Section 2. Posted positions shall be filled by the most senior qualified applicant from within the bargaining unit. If the position cannot be filled from within the bargaining unit, the Employer may fill the position from any source available to the Employer, provided the candidate meets all of the qualifications for hiring into that position. In all instances, the appropriate manager is responsible for the interview and selection of applicants within fourteen (14) days of the end of the posting.
Section 3. A qualified applicant shall be defined as an employee who possesses the entry level qualifications in the job description and is able to do the work when required. Ability to do the work and documented performance, inclusive of disciplinary record, may be considered when awarding a position. The Employer will notify all applicants of the result of their bid in a timely manner not to exceed two (2) weeks from the date the position is awarded.
Section 4. A successful bidder shall be required to serve a sixty (60) calendar day trial period exclusive of any classroom training required. At the midpoint of the trial period the employee shall be evaluated and given written notification if a problem exists. During the trial period, the employee will be returned to his/her original position if the employee elects to be returned or the Employer finds the employee is unsatisfactory in the new position.
Programming Phase Schematic Design Phase: 2.2.1.3. Design Development Phase:
Cost of Bidding 6.1 The bidder shall bear all costs associated with the preparation and submission of his Bid, and the Employer will in no case be responsible and liable for those costs.
Convicted, Discriminatory, Antitrust Violator, and Suspended Vendor Lists In accordance with sections 287.133, 287.134, and 287.137, F.S., the Contractor is hereby informed of the provisions of sections 287.133(2)(a), 287.134(2)(a), and 287.137(2)(a), F.S. For purposes of this Contract, a person or affiliate who is on the Convicted Vendor List, the Discriminatory Vendor List, or the Antitrust Violator Vendor List may not perform work as a contractor, supplier, subcontractor, or consultant under the Contract. The Contractor must notify the Department if it or any of its suppliers, subcontractors, or consultants have been placed on the Convicted Vendor List, the Discriminatory Vendor List, or the Antitrust Violator Vendor List during the term of the Contract. In accordance with section 287.1351, F.S., a vendor placed on the Suspended Vendor List may not enter into or renew a contract to provide any goods or services to an agency after its placement on the Suspended Vendor List. A firm or individual placed on the Suspended Vendor List pursuant to section 287.1351, F.S., the Convicted Vendor List pursuant to section 287.133, F.S., the Antitrust Violator Vendor List pursuant to section 287.137, F.S., or the Discriminatory Vendor List pursuant to section 287.134, F.S., is immediately disqualified from Contract eligibility.
Vacation Bidding 1. Vacations will be bid by shifts in a Bid Area, except that in any Bid Area having less than 50 employees, vacations shall be bid by Bid Area. When mutually agreed between the Company and the local Union Business Agent/Chief Stewards/Coordinator vacations may be bid by groupings other than those listed herein. Provided that the Company will not unreasonably withhold agreement to such grouping as the local Business Agent advocates. It shall not be unreasonable for the Company to withhold agreement if the proposed grouping can reasonably be expected to materially affect the operation or any portion thereof.
2. In each vacation bidding group, the Department Head or Designee, will determine the total number of vacation weeks to be taken including regular earned vacation and deferred Holidays. For determining weeks to be bid, two (2) or less days will not be considered as a week.
3. If the total number of weeks to be taken is fifty (50) weeks or less, only one (1) person will be awarded a vacation in any given week (considered as a column).
4. If the total number is greater than fifty (50) weeks, a full column will be available for bidding each fifty (50) weeks, and if necessary, a partial column will be available for any remaining weeks in the last column. This method is used to avoid scheduling more people than necessary to be on vacation in any specific week.
5. Once a year, generally in early November, employees will bid for available vacation in the succeeding year based on adjusted Company Service Date. The Company will post notice of where and when employees will bid their initial and subsequent rounds of vacation. Employees will at that specific time, have three (3) ways to notify management of their bid preferences. They may show up in person, or telephone in their preference, or submit a written pre-bid to the designated management representative prior to any particular vacation bid round. Written confirmation will be provided to employees submitting written pre-bids. Once the entire vacation biding process is completed the vacation listings will be posted no later than December 15th.
6. Employees may bid one (1) continuous vacation period, which may include all or any portion of the vacation to which he is entitled. However if the employee is eligible for less than ten (10) working days the employee may not split the available vacation. Once an employee is eligible for ten (10) working days or more, the employee may split the employee’s vacation into separate periods of complete weeks and if a partial week remains, it will be taken in conjunction with one (1) of the employee’s complete weeks.
7. Once each employee has had the opportunity to bid, additional rounds of bidding will be permitted following the same procedure used on the initial round.
8. If an employee does not bid at all, during any given round, the employee will not be given the opportunity to bid until the next round. However if an employee misses his bid time but calls or shows up to bid before that particular round is complete, he will be allowed to bid at that time from the remaining available weeks.
9. If an employee is a member of the Military Reserve and will attend a two
Schematic Design Phase 1.2.1 Based on the mutually agreed upon Program of Requirements, Amount Available for the Construction Contract and the Project Schedule, the Architect/Engineer shall prepare sufficient alternative approaches utilizing BIM for design and construction of the Project to satisfy Owner’s project requirements and shall, at completion of this phase, submit Schematic Design Documents derived from the model in accordance with the BIM Execution Plan, “Facility Design Guidelines” and any additional requirements set forth in Article 15. The Architect/Engineer shall review alternative approaches to design and construction for the Project as they are being modeled at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by the Owner within the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Schematic Design. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner.
1.2.2 Architect/Engineer shall provide all services necessary to perform the services of this phase (preparation of model(s), relevant data, decision support model views and Schematic Design Documents) including, without limitation, unless otherwise approved by Owner, the preparation and prompt delivery of all items specified in the BIM Execution Plan and “Facility Design Guidelines”.
1.2.3 Architect/Engineer shall work closely with Owner in preparation of schematic drawings and shall specifically conform to Owner’s requirements regarding aesthetic design issues.
1.2.4 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments.
1.2.5 Before proceeding into the Design Development Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Schematic Design documents and approval of the Architect/Engineer’s preliminary Estimated Construction Cost and schedule.
1.2.6 The Architect/Engineer shall participate in a final review of the Schematic Design Documents and model(s) with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Schematic Design Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments, any of which may be appealed for good cause.
Preliminary Design Phase 30 percent plans)
A. Proceed with Preliminary Design Phase after the completion of the Conceptual phase which includes: Acceptance by Owner of the Conceptual Report and any other Study and Report Phase deliverables; selection by Owner of a recommended solution; issuance by Owner of any instructions for use of Project Strategies, Technologies, and Techniques, or for inclusion of sustainable features in the design, and Indication by Owner of any specific modifications or changes in the scope, extent, character, or design requirements of the Project desired by Owner.
1. Prepare Preliminary Design Phase documents consisting of final design criteria, preliminary drawings, outline specifications, and written descriptions of the Project.
2. Include on plans, property lines, structure locations, ownership names and contact information.
3. In preparing the Preliminary Design Phase documents, use any specific applicable Project Strategies, Technologies, and Techniques authorized by Owner during or following the Study and Conceptual Phase, and include sustainable features, as appropriate, pursuant to Owner’s instructions.
4. Provide necessary field surveys, topographic and utility mapping for Engineer’s design purposes. Comply with the scope of work and procedure for the identification and mapping of existing utilities as defined by Section A1.03 “Utility Requirements” and Section A1.04 “Survey Services”
5. Visit the Site as needed to prepare the Preliminary Design Phase documents.
6. Advise Owner if additional reports, data, information, or services of the types described are necessary and assist Owner in obtaining such reports, data, information, or services.
7. Continue to assist Owner with Project Strategies, Technologies, and Techniques that Owner has chosen to implement.
8. Based on the information contained in the Preliminary Design Phase documents, prepare a revised opinion of probable Construction Cost, and assist Owner in tabulating the various cost categories which comprise Total Project Costs.
9. Obtain and review Owner’s instructions regarding Owner’s procurement of construction services (including instructions regarding advertisements for bids, instructions to bidders, and requests for proposals, as applicable), Owner’s construction contract practices and requirements, insurance and bonding requirements, electronic transmittals during construction, and other information necessary for the finalization of Owner’s bidding-related documents (or requests for proposals or other construction procurement documents), and Construction Contract Documents. Also obtain and review copies of Owner’s design and construction standards, Owner’s standard forms, general conditions, supplementary conditions, text, and related documents or content for Engineer to include in the draft bidding-related documents (or requests for proposals or other construction procurement documents), and in the draft Construction Contract Documents, when applicable.
10. Development communication plan for project: considering the use of door hangers, letters, public meetings, changeable message boards.
11. Furnish 6 review copies of the Preliminary Design Phase documents, opinion of probable Construction Cost, and any other Preliminary Design Phase deliverables to Owner by established due date, and review them with Owner. Owner shall submit to Engineer any comments regarding the furnished items.
12. Revise the Preliminary Design Phase documents, opinion of probable Construction Cost, and any other Preliminary Design Phase deliverables in response to Owner’s comments, as appropriate, and furnish to Owner 6 copies of the revised Preliminary Design Phase documents, revised opinion of probable Construction Cost, and any other deliverables by the specified due date.
13. Engineer’s services under the Preliminary Design Phase will be considered complete on the date when Engineer has delivered to Owner the revised Preliminary Design Phase documents, revised opinion of probable Construction Cost, and any other Preliminary Design Phase deliverables.
RESERVE PRICE AND BIDDING AT AUCTION CONDITIONS OF SALE
1.1 This sale is made by AmBank (M) Berhad [196901000166 (8515-D)][formerly known as AmFinance Berhad](“Assignee/Bank”) in exercise of the rights and powers conferred upon the Assignee/Bank pursuant to the Facility Agreement, Deed Of Assignment and Power Of Attorney all dated the 19th October, 2017 executed by Todi Ashish (Assignor/Borrower”) in favour of the Assignee/Bank subject to all conditions and category of land use, express or implied or imposed upon or relating to or affecting the property (“Property”) and shall further subject to the reserve price (“Reserve Price”) and the Conditions of Sale as appearing in the Proclamation of Sale.
1.2 Subject to the provisions of Clause 5 below the highest bidder for the Property described in the Proclamation of Sale if so allowed by the Auctioneer shall be the Purchaser (“Purchaser”) thereof and the Auctioneer shall have the right to reject any bid. If any dispute shall arise as to any bidding, the Property shall be at the option of the Auctioneer be put up again for sale at the last undisputed bid or the Auctioneer may decide on the dispute and the decision of the Auctioneer on all matters not provided for in this Conditions of Sale shall be final and binding in all respects if such decision is made during the course of conducting the auction on the auction date.
1.3 No bid shall be less than the previous bid and each bid shall be increased by a minimum amount to be determined by the Auctioneer at the time the Property is put up for sale and no bidding shall be withdrawn or retracted. Should there be any withdrawal or retraction from the registered bidder(s) or the highest bidder before or after the fall of the hammer, the bidding deposit (“Bidding Deposit”) shall be forfeited to the Assignee/Bank and the Property shall be at the option of the Auctioneer be put up for sale again or the Auctioneer may decide to adjourn the auction sale to another date.
1.4 In the event the subject matter offered for auction comprises more than one (1) property, the Auctioneer shall have the right to: -
(a) determine or vary the order of sale;
(b) offer the properties for sale either individually or en bloc or in any combination/manner as determined by the Auctioneer; and/or
(c) withdraw any of the properties from the sale.
