Phase 2 Phase 2 is expected to consist of Member Nodes and a select number of Nodes operated by non-Members. The non-Member Nodes will be required to comply with Node hosting terms as set forth by the Council, which may be amended from time to time (the “General Node Terms”).
Project Completion Date It is agreed between the Parties that the Project Completion Date is <END DATE, YEAR>. If the Project is not completed by such date then, subject to an amendment agreed to between the Parties, Alberta Innovates may elect to terminate this Investment Agreement. In such event, Alberta Innovates will notify the Applicant of its decision to terminate as soon as reasonably practical and shall advise the Applicant of the effective date of termination. Alberta Innovates will have no liability or obligation to reimburse the Applicant for any Project Costs incurred after the effective date of termination and may require the Applicant to return any portions of the Investment which were spent on Ineligible Expenses. Additionally, any portion of the Investment not used and accounted for in accordance with this Agreement as of the Project Completion Date or earlier termination is repayable by the Applicant to AI at AI’s request.
Disbursement of the Tenant Improvement Allowance Except as otherwise set forth in this Work Letter, the Tenant Improvement Allowance shall be disbursed by Landlord (each of which disbursements shall be made pursuant to Landlord’s disbursement process, which disbursement process shall require the Architect to make field verifications and written certifications as required by Landlord in connection with Landlord’s disbursements to Contractor (as defined below)) only for the following items and costs (collectively the “Tenant Improvement Allowance Items”): (a) Payment of (i) the fees of the Architect and the Engineers (as defined below), (ii) charges for Landlord’s construction consultant and Building engineer, and (iii) the fees incurred by, and the cost of documents and materials supplied by, Landlord and Landlord’s consultants in connection with the preparation and review of the Construction Drawings (as defined below); (b) The payment of plan check, permit and license fees relating to construction of the Tenant Improvements; (c) The cost of construction of the Tenant Improvements, including, without limitation, any cost of after-hours freight elevator usage; (d) The cost of any changes in the Base, Shell, and Core when such changes are required by the Construction Drawings, such cost to include all direct architectural and/or engineering fees and expenses incurred in connection therewith; (e) The cost of any changes to the Construction Drawings or Tenant Improvements required by applicable laws and building codes (collectively, “Code”); (f) Sales and use taxes; and (g) All other costs to be expended by Landlord in connection with the construction of the Tenant Improvements. In no event shall the Tenant Improvement Allowance Items include any costs of procuring or installing in the Premises any trade fixtures, equipment, furniture, furniture partitions or systems, furnishings, telephone, telecommunications, data and security wiring, cabling and equipment, or other personal property (“Personal Property”) to be used in the Premises by Tenant, and the cost of such Personal Property shall be paid by Tenant.
Phase II A small portion of the work for the Phase II modifications to the Plattsburgh Substation will be performed by Transmission Owner, and the remainder will be performed by Clinton and Xxxxxxxxx. A detailed definition of the specific scope for Transmission Owner and Clinton and Xxxxxxxxx including interface points shall be defined during the design phase and, as such documents become available, copies will be delivered to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The full scope includes the installation of wave traps, CCVT’s and modifications and/or additions to relaying on the MWP-1 and MWP- 2 lines. These lines will be reconfigured at the completion of Phase II to connect to Xxxxx and Xxxxxxx Substations on MWP-1 and the Xxxx Substation on MWP-2. Clinton and Xxxxxxxxx will design the upgrades and purchase the materials based on the outline specification that was prepared and issued by Transmission Owner. The work to be performed by Clinton and Xxxxxxxxx will include both the materials for the exterior and interior installations and items for Transmission Owner installation inside the control building in existing relay panels and communication racks. In addition, Clinton and Xxxxxxxxx will be responsible for the exterior and interior construction work and will provide construction management services in coordination with Transmission Owner. The civil design for the foundations and the electrical design for the cable runs to the control room will be designed by, as approved by Transmission Owner, and installed under the supervision and control of Clinton and Xxxxxxxxx. The equipment will be selected and procured in accordance with the specifications developed during the detailed engineering phase, copies of which shall be furnished to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The construction of the foundations, structures, wave traps, CCTV and cable runs into the control building to the termination cabinets will be completed by Clinton and Xxxxxxxxx. The work at the Plattsburgh Substation will be installed under Transmission Owner’s CPP-1. Transmission Owner will provide Protection and Controls Engineering, install and terminate wiring from the termination cabinets to the control panels and relays, install relays and equipment in the existing panels, and will commission such work inside the 230kV control building. Transmission Owner will develop the communications protocols and data flow over the circuits.
Construction Phase Fee Contractor’s Construction Phase Fee is the maximum amount payable to Contractor for any cost or profit expectation incurred in the performance of the Work that is not specifically identified as being eligible for reimbursement by Owner elsewhere in this Agreement. References in the UGSC to Contractor’s “overhead” and “profit” mean Contractor’s Construction Phase Fee. The Construction Phase Fee includes, but is not limited to, the following items: 9.1 All profit, profit expectations and costs associated with profit sharing plans such as personnel bonuses, incentives, and rewards; company stock options; or any other like expenses of Contractor.
Disbursement of Tenant Improvement Allowance During the construction of the Tenant Improvements, Landlord shall make monthly disbursements of the Tenant Improvement Allowance for Tenant Improvement Allowance Items for the benefit of Tenant and shall authorize the release of monies for the benefit of Tenant as follows.
Construction Phase Services 3.1.1 – Basic Construction Services
Development Phase contractual phase initiated with the approval of ANP for the Development Plan and which is extended during the Production Phase while investments in xxxxx, equipment, and facilities for the Production of Oil and Gas according to the Best Practices of the Oil Industry are required.
Project Completion The Contractor agrees to schedule a final job walk with the County. If required, the County will prepare a list of incomplete items, the “Punch List”. The Contractor agrees to complete the “Punch List” corrections and schedule a final project completion job walk. The County will sign the “Punch List” as completed when determined, the project is finished. The Contractor agrees to submit the following along with its final payment request:
Post-Closing Access (a) Each of Seller and Buyer shall, and Buyer shall cause the Company to, preserve and keep all books and records and other information relating to the accounting, legal, Tax, regulatory, business and financial affairs of the Company and the Rolling Mill Business for a period of seven (7) years after the Closing Date (or, in the case of information relating to Taxes, until the expiration of any applicable statute of limitations), or for a longer period if (i) required by Law (including any statute of limitations and applicable extensions thereof) or any Governmental Authority or (ii) reasonably necessary with respect to the prosecution or defense of any audit or other legal or regulatory action that is then pending or threatened so long as the requesting Party has notified the other Party with prior written notice of the need to retain such books, records or information. (b) Following the Closing, for so long as such information is retained by Buyer in accordance with Section 5.8(a), Buyer shall, and shall cause the Company, to permit Seller and its authorized Representatives, at Seller’s sole cost and expense, to have reasonable access and duplication rights during normal business hours, upon reasonable prior written notice to Buyer to the information described in Section 5.8(a) to the extent that such access may be reasonably required in connection with (i) the preparation of any Tax Return, accounting records or with respect to any Tax Claim or similar proceedings, (ii) any Action relating to Seller, the Company or the Rolling Mill Business, (iii) any Governmental Filing or matter (including investigations by Governmental Authorities) or (iv) any other valid legal or business purpose. Notwithstanding the foregoing, Seller shall have no right of access to, and Buyer shall have no obligation to provide, (A) any information if doing so would reasonably be expected to (1) violate any Contract or Law to which Buyer or any of its Affiliates (including the Company) is a party or is subject, (2) result in a loss of the ability to successfully assert a claim of privilege (including the attorney-client and work product privileges), (3) result in the disclosure of any competitively sensitive information of Buyer or of any of its Affiliates (including the Company), or (4) breach a confidentiality or other obligation to a Third Party (provided that Buyer shall use commercially reasonable efforts to obtain the consent of any Third Party with regards to such disclosure), or (B) any consolidated, combined, affiliated or unitary Tax Return which includes Buyer or any of its Affiliates (including the Company) or any Tax-related work papers. (c) Following the Closing, for so long as such information is retained by Seller in accordance with Section 5.8(a), Seller shall permit Buyer and its authorized Representatives, at Buyer’s sole cost and expense, to have reasonable access and duplication rights during normal business hours, upon reasonable prior written notice to Seller, to the information described in Section 5.8(a) to the extent that such access may be reasonably required in connection with (i) the preparation of any Tax Return, accounting records or with any Tax Claim or similar proceedings, (ii) any Action relating to the Company or the Rolling Mill Business, (iii) any Governmental Filing or matter (including investigations by Governmental Authorities) or (iv) any other valid legal or business purpose. Notwithstanding the foregoing, Buyer shall have no right of access to, and Seller shall have no obligation to provide, (A) any information if doing so would reasonably be expected to (1) violate any Contract or Law to which Seller or any of its Affiliates is a party or is subject,
