Potential-to-Save Verification Plan Sample Clauses

Potential-to-Save Verification Plan. The verification of potential-to-save will be based on completion of the following: Installation Documentation and Customer Acceptance will verify installation of the ECM. Customer to provide Honeywell with confirmation from FP&L that rate structures for the impacted fixtures have been updated. Annual Cost Savings to be updated with current utility unit costs.
AutoNDA by SimpleDocs
Potential-to-Save Verification Plan. The verification of potential-to-save will be based on review of installation documents, to verify that the mechanical system retrofits have been installed within contract specifications. Verification documentation will include, but not be limited to, contractor start up documentation, and review of name plate and manufacturer specifications data. The verification of potential-to-save will be based on completion of the following: • Measurement and verification for this ECM will be accomplished with pre installation observations and engineering calculations. • The annual operating hours for each system will be stipulated to the hours presented in the contract. • Annual site visit walk-thru and visual inspection of a sample of the retrofit. • Annual Cost Savings to be updated with current utility unit costs. ECM Method Parameter Type Parameter Baseline Post Installation Regular Interval 3a: DX Unit Retrofit A Energy Unit EER or SEER Engineering calculation Unit SEER Savings based on engineering calculations and new SEER Annual walk-through and visual inspection. No annual measurement will be done. A Operational Material Cost of difference in life cycle cost between existing and replaced units Agreed upon based on survey data Agreed upon to be same as baseline Annual review and walk- through ECM Method Parameter Type Parameter Baseline Post Installation Regular Interval 3b: Coil Coating Retrofit A Energy none Current conditions EPA and FPL studies Annual walk-through and visual inspection. No annual measurement will be done. A Operational Material Cost of extended life cycle of existing units Agreed upon based on survey data Agreed upon to be same as baseline Annual review and walk- through ECM Method Parameter Type Parameter Baseline Post Installation Regular Interval 3c: Thermostat Retrofit A Energy *Temp setpt changes *Improved temp. control Current conditions Savings based on engineering calculations Annual walk-through and visual inspection. No annual measurement will be done. A Operational none none none none
Potential-to-Save Verification Plan. The verification of potential-to-save will be based on review of installation documents, to verify that the building envelope retrofits have been installed within contract specifications. Verification documentation will include, but not be limited to, contractor start up documentation, and review of name plate and manufacturer specifications data.
Potential-to-Save Verification Plan. The verification of potential-to-save will be based on completion of the following: • Measurement and verification for this ECM will be accomplished with Pre and Post installation measurements of the power draw for a representative sample of each type of fixture retrofit. • The annual operating hours for each fixture will be stipulated to the hours presented in the lighting line by line in Exhibit 4. • Annual site visit walk-thru and visual inspection of a sample of the retrofit. • Annual Cost Savings to be updated with current utility unit costs. ECM Method Parameter Type Parameter Baseline Post Installation Regular Interval Lighting Retrofit A Energy Fixture amperage Sample Pre and Post measure- ments One-time measurement 5% of fixtures that comprise 80% of the kW reduction One-time measurement 5% of fixtures that comprise 80% of the kW reduction at end of installation period will be done by the lighting sub-contractor. Annual walk- through and visual inspection. No annual measurement will be done. A Operational Material savings for extended retrofit lamp life (reduced changeouts) Agreed upon based on survey data Agreed upon to be same as baseline Annual review and walk-through

Related to Potential-to-Save Verification Plan

  • Contractor Certification for Contractor Employees Introduction Texas Education Code Chapter 22 requires entities that contract with school districts to provide services to obtain criminal history record information regarding covered employees. Contractors must certify to the district that they have complied. Covered employees with disqualifying criminal histories are prohibited from serving at a school district. Definitions: Covered employees: Employees of a contractor or subcontractor who have or will have continuing duties related to the service to be performed at the District and have or will have direct contact with students. The District will be the final arbiter of what constitutes direct contact with students. Disqualifying criminal history: Any conviction or other criminal history information designated by the District, or one of the following offenses, if at the time of the offense, the victim was under 18 or enrolled in a public school: (a) a felony offense under Title 5, Texas Penal Code; (b) an offense for which a defendant is required to register as a sex offender under Chapter 62, Texas Code of Criminal Procedure; or (c) an equivalent offense under federal law or the laws of another state. I certify that: NONE (Section A) of the employees of Contractor and any subcontractors are covered employees, as defined above. If this box is checked, I further certify that Contractor has taken precautions or imposed conditions to ensure that the employees of Contractor and any subcontractor will not become covered employees. Contractor will maintain these precautions or conditions throughout the time the contracted services are provided. OR SOME (Section B) or all of the employees of Contractor and any subcontractor are covered employees. If this box is checked, I further certify that: (1) Contractor has obtained all required criminal history record information regarding its covered employees. None of the covered employees has a disqualifying criminal history.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Certification Regarding Lobbying Applicable to Grants Subgrants, Cooperative Agreements, and Contracts Exceeding $100,000 in Federal Funds Submission of this certification is a prerequisite for making or entering into this transaction and is imposed by section 1352, Title 31, U.S. Code. This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure. The undersigned certifies, to the best of his or her knowledge and belief, that: (1) No Federal appropriated funds have been paid or will be paid by or on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with the awarding of a Federal contract, the making of a Federal grant, the making of a Federal loan, the entering into a cooperative agreement, and the extension, continuation, renewal, amendment, or modification of a Federal contract, grant, loan, or cooperative agreement.

  • Public Posting of Approved Users’ Research Use Statement The PI agrees that information about themselves and the approved research use will be posted publicly on the dbGaP website. The information includes the PI’s name and Requester, project name, Research Use Statement, and a Non-Technical Summary of the Research Use Statement. In addition, and if applicable, this information may include the Cloud Computing Use Statement and name of the CSP or PCS. Citations of publications resulting from the use of controlled-access datasets obtained through this DAR may also be posted on the dbGaP website.

  • Certification of Meeting or Exceeding Tobacco-Free Workplace Policy Minimum Standards A. Grantee certifies that it has adopted and enforces a Tobacco-Free Workplace Policy that meets or exceeds all of the following minimum standards of: i. Prohibiting the use of all forms of tobacco products, including but not limited to cigarettes, cigars, pipes, water pipes (hookah), bidis, kreteks, electronic cigarettes, smokeless tobacco, snuff and chewing tobacco; ii. Designating the property to which this Policy applies as a "designated area,” which must at least comprise all buildings and structures where activities funded under this Grant Agreement are taking place, as well as Grantee owned, leased, or controlled sidewalks, parking lots, walkways, and attached parking structures immediately adjacent to this designated area; iii. Applying to all employees and visitors in this designated area; and iv. Providing for or referring its employees to tobacco use cessation services. B. If Grantee cannot meet these minimum standards, it must obtain a waiver from the System Agency.

  • HHS Single Audit Unit will notify Grantee to complete the Single Audit Determination Form If Grantee fails to complete the form within thirty (30) calendar days after receipt of notice, Grantee maybe subject to sanctions and remedies for non-compliance.

  • Contractor Sales Reporting Vendor Management Fee Contractor Reports Cooperative Master Contract Sales Reporting. Contractor shall report total Cooperative Master Contract sales quarterly to Enterprise Services, as set forth below. Cooperative Master Contract Sales Reporting System. Contractor shall report quarterly Cooperative Master Contract sales in Enterprise Services’ Cooperative Master Contract Sales Reporting System. Enterprise Services will provide Contractor with a login password and a vendor number. The password and vendor number will be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. Data. Each sales report must identify every authorized Purchaser by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized Purchasers specified herein during the term of the Cooperative Master Contract. If there are no Cooperative Master Contract sales during the reporting period, Contractor must report zero sales. Due dates for Cooperative Master Contract Sales Reporting. Quarterly Cooperative Master Contract Sales Reports must be submitted electronically by the following deadlines for all Cooperative Master Contract sales invoiced during the applicable calendar quarter: Vendor Management Fee. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 1.5 percent on the purchase price for all Cooperative Master Contract sales (the purchase price is the total invoice price less applicable sales tax). The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows: Amount owed to Enterprise Services = Total Cooperative Master Contract sales invoiced (not including sales tax) x .015. The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services. Enterprise Services will invoice Contractor quarterly based on Cooperative Master Contract sales reported by Contractor. Contractor is not to remit payment until Contractor receives an invoice from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference this Cooperative Master Contract number, the year and quarter for which the VMF is being remitted, and Contractor’s name as set forth in this Cooperative Master Contract, if not already included on the face of the check. Contractor’s failure to report accurate total net Cooperative Master Contract sales, to submit a timely Cooperative Master Contract sales report, or to remit timely payment of the VMF to Enterprise Services, may be cause for Enterprise Services to suspend Contractor or terminate this Cooperative Master Contract or exercise remedies provided by law. Without limiting any other available remedies, the parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sums, the sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less. Enterprise Services reserves the right, upon thirty (30) calendar days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Cooperative Master Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing. Annual Cooperative Master Contract Sales Report. Contractor shall provide to Enterprise Services a detailed annual Cooperative Master Contract sales report. Such report shall include, at a minimum: the Goods/Services sold (including, as applicable, item number or other identifier), per unit quantities sold, items and volumes purchased by Purchaser, shipment/delivery locations by Purchaser, and Cooperative Master Contract price. This report must be provided in an electronic format that can be read by Microsoft (MS) Excel. Such report is due within thirty (30) calendar days of the annual anniversary of the effective date of this Cooperative Master Contract.

  • Third Party Administrators for Defined Contribution Plans 2.1 The Fund may decide to make available to certain of its customers, a qualified plan program (the “Program”) pursuant to which the customers (“Employers”) may adopt certain plans of deferred compensation (“Plan or Plans”) for the benefit of the individual Plan participant (the “Plan Participant”), such Plan(s) being qualified under Section 401(a) of the Code and administered by TPAs which may be plan administrators as defined in the Employee Retirement Income Security Act of 1974, as amended. 2.2 In accordance with the procedures established in Schedule 2.1 entitled “Third Party Administrator Procedures,” as may be amended by the Transfer Agent and the Fund from time to time (“Schedule 2.1”), the Transfer Agent shall: (a) Treat Shareholder accounts established by the Plans in the name of the Trustees, Plans or TPAs, as the case may be, as omnibus accounts; (b) Maintain omnibus accounts on its records in the name of the TPA or its designee as the Trustee for the benefit of the Plan; and (c) Perform all Services under Section 1 as transfer agent of the Funds and not as a record-keeper for the Plans. 2.3 Transactions identified under Sections 1 and 2 of this Agreement shall be deemed exception services (“Exception Services”) when such transactions: (a) Require the Transfer Agent to use methods and procedures other than those usually employed by the Transfer Agent to perform transfer agency and recordkeeping services; (b) Involve the provision of information to the Transfer Agent after the commencement of the nightly processing cycle of the TA2000 System; or (c) Require more manual intervention by the Transfer Agent, either in the entry of data or in the modification or amendment of reports generated by the TA2000 System, than is normally required.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Conditions & Requirements

  • Contractor Certification Regarding Ethics The Contractor certifies that the Contractor is now, and shall remain, in compliance with Chapter 42.52 RCW, Ethics in Public Service, throughout the term of this Contract.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!