PRODUCT DEVELOPMENT AND ACCEPTANCE Sample Clauses

PRODUCT DEVELOPMENT AND ACCEPTANCE. 2.1 Pursuant to the terms of this Agreement, the parties will work together to develop and customize the most functional and cost effective Product from an existing hardware reference platform specification by creating a derivative specification, which incorporates Zoned In's Specified Features. Zoned In will provide its Specified Features to UNIVIEW and UNIVIEW will design and integrate those features with the existing hardware reference platform. The parties recognize that technical assistance and discussions will be required, from time to time, to assist UNIVIEW in integrating Zoned In's Specified Features into the Product. UNIVIEW and Zoned In agree to mutually cooperate to resolve technical issues in order to efficiently resolve technical questions as they might arise. Each party agrees to bear its own costs associated with any such assistance. 2.1.1 Whenever possible Zoned In will provide the hardware and appropriate drivers for peripheral devices that connect to the Product. However, the parties agree to work together on the interfacing issues relating to such devices. In addition, UNIVIEW will work on all issues pertaining to the Product interfacing with the Internet and Zoned In's secured network. 2.1.2 The Graphic User Interface (GUI) shall only display Zoned In's trademark or trademarks approved by Zoned In into the home page of the Z-Box. 2.1.3 User authentication shall be accomplished through smart cards. Zoned In will enable smart cards to be sent to users prior to the user's receipt of the Z-Box. The smart card will automatically register and authenticate the user at an authentication site located within Zoned In's default Internet Service Provider (ISP). 2.2 UNIVIEW will develop and provide to Zoned In a Product prototype with per unit pricing no later than thirty (30) days after UNIVIEW receives Zoned In's Specified Features. This prototype shall contain all of Zoned In's Specified Features, or may contain whatever feature set to which the parties may mutually agree in order to expedite delivery of the initial prototype. The prototype shall also include the GUI that incorporates Zoned In's trademark into the home page of the Z-Box. Once Zoned In accepts the prototype, UNIVIEW shall provide nineteen (19) additional like prototypes to Zoned In no later than fifteen (15) days after acceptance. 2.3 Zoned In shall have thirty (30) days from the date it receives the initial Product prototype in which to accept or reject such Product prototype in...
AutoNDA by SimpleDocs
PRODUCT DEVELOPMENT AND ACCEPTANCE. XipLink will develop and deliver the deliverables described in Exhibit A according to the schedule described in Exhibit A. Gogo will have up to four (4) business days to examine each deliverable and determine if it conforms to the applicable requirements. If the deliverable meets the requirements, Gogo will signify acceptance of the deliverable. Gogo’s acceptance of any deliverable will not release XipLink from its warranty obligations under section 5. If the deliverable does not meet the requirements in Gogo’s opinion, Gogo will indicate rejection of the deliverable, and provide a list of errors. Within ten (10) days of receiving a rejection, XipLink will correct such errors so that the deliverable conforms to the applicable requirements. Upon correction of the errors, XipLink will re-deliver the corrected deliverable to Gogo, at XipLink’s expense, which corrected deliverable will be subject to the approval procedure described in this section. However, if errors still exist after three (3) attempts at correction by XipLink, Gogo may terminate this agreement by providing notice to XipLink with Gogo’s description of the remaining errors.
PRODUCT DEVELOPMENT AND ACCEPTANCE. 2.1 Pursuant to the terms of this Agreement, Metrophone will provide its Specified Features to uniView and uniView will design and customize the Product pursuant to the Scope of Work shown in Exhibit A. The Product will consist of uniView Model 310 Digital Media Devices, a Graphical User Interface customized to Metrophone's specification and Consulting Services as may be agreed. uniView will provide an alpha version of the Product to Metrophone within an agreed time frame after receipt of a purchase order from Metrophone. uniView will deliver additional alpha prototypes to Metrophone at such times and in such quantities as may be mutually agreed in writing. 2.2 From the date uniView delivers the initial Product prototype to Metrophone, Metrophone shall have thirty (30) days in which to give written notice of acceptance or rejection of such Product prototype. Acceptance or rejection shall be based upon a determination by uniView and Metrophone whether the delivered Product prototype provides the Specified Features. Such acceptance shall not be unreasonably withheld. If Metrophone fails to deliver to uniView its written acceptance or rejection within the thirty (30) day acceptance period, the Product shall be deemed accepted and approved for production. 2.3 If Metrophone gives uniView written notice of rejection of the Product prototype within the thirty (30) day acceptance period, then uniView and Metrophone will cooperate in determining a corrective action plan within ten (10) business days after such notice. uniView shall perform the corrective action and resubmit an alpha version to Metrophone within twenty (20) business days after determining a corrective action plan. If after the parties have attempted good faith corrective actions and such actions are unsuccessful, then either party will have the right to terminate this Agreement with thirty (30) days notice. If this Agreement is so terminated, each party shall return all Confidential Information of the other party.
PRODUCT DEVELOPMENT AND ACCEPTANCE 

Related to PRODUCT DEVELOPMENT AND ACCEPTANCE

  • Testing and Acceptance Within […***…] after RFM’s delivery of the IC Design File to ST, ST shall manufacture and deliver a commercially reasonable quantity of evaluation Product to RFM for evaluation testing. Upon RFM’s receipt of such Products from ST, RFM shall test such Products with the applicable Evaluation Software and in the applicable Evaluation Circuit Design to determine if the IC Design for such Products conforms to the applicable Specifications. Upon completion of such testing, RFM shall provide ST with the data from such testing (“Evaluation Data”). Upon ST’s receipt of the Evaluation Data, ST shall evaluate whether the Evaluation Data indicates that the IC Design conforms to the Specifications in all material respects. ST shall accept or reject the IC Design based on the Evaluation Data and shall give RFM written notice thereof within seven (7) calendar days after RFM’s delivery of the Evaluation Data to ST. An IC Design will be deemed accepted by ST if RFM has not received notification of rejection of such IC Design from ST within seven (7) calendar days after RFM’s delivery of the applicable Evaluation Data to ST. ST’s refusal to accept the IC Design must be reasonable, must be in writing and must be accompanied by a reasonably detailed description of the manner in which the IC Design fails to comply with the Specifications in all material respects (collectively, the “Deficiencies”) so that RFM can have the opportunity to correct the Deficiencies. If ST properly rejects the IC Design, RFM shall use commercially reasonable efforts to correct any Deficiencies and redeliver a corrected IC Design File within […***…] after RFM’s receipt of the rejection notice and the foregoing provisions set forth in this Section 3.3 shall be reapplied until the IC Design is accepted; provided, however, that upon the […***…] or any subsequent rejection, either party may terminate this Agreement upon thirty (30) calendar days prior written notice to the other party, unless the IC Design is accepted during such notice period.

  • Employment and Acceptance During the Term (as defined in Section 1.2), the Company shall employ the Executive, and the Executive shall accept such employment and serve the Company, in each case, subject to the terms and conditions of this Agreement.

  • INSPECTION AND ACCEPTANCE Cisco may reject any or all of the Work which does not conform to the applicable requirements within 10 business days of Supplier’s delivery of the Work. At Cisco’s option, Cisco may (i) return the non- conforming Work to Supplier for a refund or credit; (ii) requires Supplier to replace the non-conforming Work; or (iii) repair the non-conforming Work so that it meets the requirements. As an alternative to (i) through (iii), Cisco may accept the non-conforming Work conditioned on Supplier providing a refund or credit in an amount Cisco reasonably determines to represent the diminished value of the non-conforming Work. Cisco’s payment to Supplier for Work prior to Xxxxx’s timely rejection of such Work as non- conforming will not be deemed as acceptance by Xxxxx.

  • Delivery and Acceptance of the Manuscript The Author shall deliver the Contribution to the Editor (or, if requested by the Publisher, to the Publisher) on or before Delivery Date (the “Delivery Date”) electronically in the Publisher's standard requested format or in such other form as may be agreed in writing with the Publisher. The Author shall retain a duplicate copy of the Contribution. The Contribution shall be in a form acceptable to the Publisher (acting reasonably) and in line with the instructions contained in the Publisher’s guidelines as provided to the Author by the Publisher. The Author shall provide at the same time, or earlier if the Publisher reasonably requests, any editorial, publicity or other information (and in such form or format) reasonably required by the Publisher. The Publisher may exercise such additional quality control of the manuscript as it may decide at its sole discretion including through the use of plagiarism checking systems and/or peer review by internal or external reviewers of its choice. If the Publisher decides at its sole discretion that the final manuscript does not conform in quality, content, structure, level or form to the stated requirements of the Publisher, the Publisher shall be entitled to terminate this Agreement in accordance with the provisions of this Clause. The Author must inform the Publisher at the latest on the Delivery Date if the sequence of the naming of any co-authors entering into this Agreement shall be changed. If there are any changes in the authorship (e.g. a co-author joining or leaving), then the Publisher must be notified by the Author in writing immediately and the Parties will amend this Agreement accordingly. The Publisher shall have no obligation to consider publication under this Agreement in the absence of such agreed amendment. If the Author fails to deliver the Contribution in accordance with the provisions of this Clause above by the Delivery Date (or within any extension period given by the Publisher at its sole discretion) or if the Author (or any co-author) dies or becomes incapacitated or otherwise incapable of performing the Author’s obligations under this Agreement, the Publisher shall be entitled to either: (a) elect to continue to perform this Agreement in accordance with its terms and the Publisher may commission an appropriate and competent person (who, in the case of co-authors having entered into this Agreement, may be a co-author) to complete the Contribution; or (b) terminate this Agreement with immediate effect by written notice to the Author or the Author's successors, in which case all rights granted by the Author to the Publisher under this Agreement shall revert to the Author/Author's successors (subject to the provisions of the Clause "Termination"). The Author agrees, at the request of the Publisher, to execute all documents and do all things reasonably required by the Publisher in order to confer to the Publisher all rights intended to be granted under this Agreement. The Author warrants that the Contribution is original except for any excerpts from other works including pre-published illustrations, tables, animations, text quotations, photographs, diagrams, graphs or maps, and whether reproduced from print or electronic or other sources ("Third Party Material") and that any such Third Party Material is in the public domain (or otherwise unprotected by copyright/other rights) or has been included with written permission from or on behalf of the rights holder (and if requested in a form prescribed or approved by the Publisher) at the Author's expense unless otherwise agreed in writing, or is otherwise used in accordance with applicable law. On request from the Publisher, the Author shall in writing indicate the precise sources of these excerpts and their location in the manuscript. The Author shall also retain the written permissions and make them available to the Publisher on request.

  • Assignment and Acceptance The parties to each assignment shall execute and deliver to the Administrative Agent an Assignment and Acceptance, together with a processing and recordation fee of $3,500, and the assignee, if it is not a Lender, shall deliver to the Administrative Agent an Administrative Questionnaire.

  • Appointment and Acceptance The Trust hereby appoints JNLD as distributor of the Shares of the Funds set forth on Schedule A on the terms and for the period set forth in this Agreement, and JNLD hereby accepts such appointment and agrees to render the services and undertake the duties set forth herein.

  • ACKNOWLEDGEMENT AND ACCEPTANCE (a) In accepting the RSUs, the Participant acknowledges and agrees: (i) that the Plan is discretionary in nature and may be amended, cancelled, suspended or terminated by the Company at any time; (ii) that the grant of the RSUs does not create any contractual or other right to receive future grants of RSUs or any right to continue an employment or other relationship with the Company (for the vesting period or otherwise); (iii) that the Participant remains subject to discharge from such relationship to the same extent as if the RSUs had not been granted; (iv) that all determinations with respect to any such future grants, including, but not limited to, when and on what terms they shall be made, will be at the sole discretion of the Committee; (v) that participation in the Plan is voluntary; (vi) that the value of the RSUs is an extraordinary item of compensation that is outside the scope of the Participant’s employment contract if any; and (vii) that the grant of RSUs is not part of normal or expected compensation for purposes of calculating any severance, resignation, redundancy, end of service payments, bonuses, long-service awards, pension or retirement benefits or similar benefits. (b) If the Participant does not want to accept the RSUs on the terms and conditions set out in this Agreement, the Plan and/or any related documents, the Participant may choose the “Decline” button. The RSUs will then be cancelled and no other benefit will be due to the Participant in lieu thereof. If Participant does not “Decline” the RSUs within thirty (30) days from the Grant Date, the Participant shall be deemed to have accepted the RSUs and shall be deemed to have agreed to the terms and conditions set out in this Agreement, the Plan and/or any related documents. (c) The grant of the RSUs is not intended to be a public offering of securities in the Participant’s country of residence (and country of employment, if different). The Company has not submitted any registration statement, prospectus or other filings with the local securities authorities (unless otherwise required under local law), and the grant of the RSUs is not subject to the supervision of the local securities authorities. No employee of the Company or any of the Company’s subsidiaries is permitted to advise the Participant on whether the Participant should acquire Shares as a result of settlement of the RSUs under the Plan. Investment in Shares involves a degree of risk. Before deciding to acquire Shares as a result of settlement of the RSUs, the Participant should carefully consider all risk factors relevant to the acquisition of Shares under the Plan and the Participant should carefully review all of the materials related to the RSUs and the Plan. In addition, the Participant should consult with the Participant’s personal advisor for professional investment advice. (d) The Participant acknowledges and agrees that it is the Participant’s express intent that this Agreement, the Addendum (if applicable) and the Plan and all other documents, notices and legal proceedings entered into, given or instituted pursuant to the award, be drawn up in English. If the Participant has received this Agreement, the Addendum and the Plan or any other documents related to the award translated into a language other than English, and if the meaning of the translated version is different than the English version, the English version shall control. (e) As a condition to the grant of the RSUs, the Participant agrees to repatriate all payments attributable to the Shares and/or cash acquired under the Plan in accordance with local foreign exchange rules and regulations in the Participant’s country of residence (and country of employment, if different). In addition, the Participant also agrees to take any and all actions, and consents to any and all actions taken by the Company and its affiliates and subsidiaries and/or the Employer, as may be required to allow the Company and its affiliates and subsidiaries or the Employer to comply with local laws, rules and regulations in the Participant’s country of residence (and country of employment, if different). Finally, the Participant agrees to take any and all actions as may be required to comply with the Participant’s personal obligations under local laws, rules and regulations in the Participant’s country of residence (and country of employment, if different).

  • Development Schedule The Project shall substantially comply with the specific timetables and triggers for action set forth in Article 5 of this Agreement. The parties acknowledge that, as provided in G.S. 160A-400.25(b), the failure to meet a commencement or completion date shall not, in and of itself, constitute a material breach of this Agreement pursuant to G.S. 160A-400.27 but must be judged based upon the totality of the circumstances.

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Concession Area, including its abandonment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!