Product Transportation Sample Clauses

Product Transportation. DARA shall provide for appropriate transportation of the Product in accordance with applicable rules and regulations in the Territory.
AutoNDA by SimpleDocs
Product Transportation. Highway automobile transportation; the Seller organizes the vehicle and bears the loading & unloading and transportation expenses.
Product Transportation. ‌ Oil product (dilbit) shipping will use the planned 1 067 mm (42 inch) Access Pipeline from the Project to the Access Pipeline trim-blending facilities located near Redwater, Alberta. Diluent will be supplied by an existing 609.6 mm (24 inch) Access Pipeline. Access Pipeline is a joint venture between Devon and MEG Energy to ship oil product and supply diluent in the area.
Product Transportation. The Producer will enter into transportation arrangements or agreements with the owners of the Oil Export Pipeline and/or the Gas Export Pipeline, as appropriate, at its own sole cost and expense for its share of Satellite Production. 8.2.1 The Parties, independently, will be responsible for submitting, or causing to be submitted, Gas and/or Oil nominations, as applicable, to the transporter(s) of such product for their individual respective share of the appropriate Satellite Production and/or Magnolia TLP Production, and for advising the Magnolia TLP Operator of such nomination. The Parties, independently, will also be responsible for cooperating with the Magnolia TLP Operator and the transporters of the Gas and/or Oil to keep their nominations in balance with their respective deliveries on the Gas and/or Oil transporters’ pipeline system. The Parties will, to the extent possible, work in good faith to cause the nominations of their respective Gas and/or Oil production to closely approximate their actual production. 8.2.2 To the extent required under this Agreement, the Magnolia TLP Operator will furnish test and production information to the Parties to adjust nominations; however, the Magnolia TLP Operator will not be responsible for, and will not be liable for any damages and/or penalties for any act done or omitted in the Magnolia TLP Operator’s performance under this Agreement or for errors in judgment, except such as may result from the Magnolia TLP Operator’s gross negligence or willful misconduct. The Parties will release, indemnify, defend and hold the Magnolia TLP Operator harmless from any transporter pipeline scheduling penalties or monthly balancing provisions imposed in Gas or Oil transportation contracts, associated with, or related to, such Party’s Gas or Oil production, by the Gas or Oil transporter, as applicable, including, without limitation, penalties imposed pursuant to its tariff, or which may be caused by Operational Flow Orders (“OFO’s”), or by unscheduled Gas, or by unauthorized Gas, except such as may result from the Magnolia TLP Operator’s gross negligence or willful misconduct.
Product Transportation. Hylife will not “ delay” orders or slow down product transportation being already in process. After being paid already, all the ordered products will be managed for transportation, except during production interruption due to large order.

Related to Product Transportation

  • Transporting Students 1. Employees shall not transport students except in accordance with School Board rules. The Board shall adopt a school board policy outlining the teacher’s and the Board’s responsibilities and liabilities. Said policy shall be included in all school handbooks beginning with the 2004-05 school year. 2. Teachers will not be required to transport pupils to and from activities which take place away from the school grounds.

  • Product Testing No later than [**] prior to a scheduled Delivery ARIAD US shall send to ARIAD SWISSCO the Delivery Documents for review. Following such review, unless within [**] of receipt of the Delivery Documents ARIAD SWISSCO gives written notice of rejection of the Product to be delivered, stating the reasons for such rejection, the Delivery shall proceed, and both Parties shall organize the same. Upon arrival at ARIAD SWISSCO nominated site it shall visually inspect the shipment of the Product to identify any damage to the external packaging. ARIAD SWISSCO may reject any shipment (or portion thereof) of the Product that is damaged by providing to ARIAD US reasonable evidence of damage within [**] after Delivery of such Product. If ARIAD SWISSCO does not so reject any shipment (or portion thereof) of the Product within [**] of Delivery of such Product, ARIAD SWISSCO shall be deemed to have accepted such shipment of the Product; provided, however, that in the case of the Product having any Latent Defect, ARIAD SWISSCO shall notify ARIAD US promptly once it becomes aware that a Product contains a Latent Defect and subsequently may reject such Product by giving written notice to ARIAD US of ARIAD SWISSCO’s rejection of such Product and shipping a representative sample of such Product or other evidence of Non-Conformance to ARIAD US within [**] after becoming aware of such Latent Defect, which notice shall include a description of the Latent Defect.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Transportation Transportation expenses include, but are not limited to, airplane, train, bus, taxi fares, rental cars, parking, mileage reimbursement, and tolls that are reasonably and necessarily incurred as a result of conducting State business. Each State agency shall determine the necessity for travel, and the mode of travel to be reimbursed.

  • Transport The Parents consent to the Pupil travelling by any form of public transport and / or in a motor vehicle driven by a responsible adult who is duly licensed and insured to drive a vehicle of that type.

  • Labeling Upon request, Lessee will xxxx the Equipment indicating Lessor's interest with labels provided by Lessor. Lessee will keep all Equipment free from any other marking or labeling which might be interpreted as a claim of ownership.

  • Product Labeling The labeling of all Licensed Products sold or offered for sale under this Agreement shall expressly state that the Licensed Product is manufactured under a license from the Medicines Patent Pool.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!