Replacement and Spare Parts Sample Clauses

Replacement and Spare Parts. 6.1 In the case of Services for which an Additional Charge is payable by the customer for replacement of spareparts, title insuch replacement or spare parts shall pass to the Customer only upon full payment of the Additional Charge. Unless otherwise agreed in writing between the Parties, risk of damage to or loss of replacement sparepartsshall passtothe Customeras soon as they are delivered to the Customer’s designated premises. 6.2 Surgitrac may from time to timerequire the Customer to purchase and store at the Site such spare parts as Surgitrac considers necessary for the provision of effective Services. 6.3 Surgitrac will not be liable for any failure or delay in providing the Services where such failure or delay is the direct or indirect result of the failure of the Customer to comply with clause 6.3. 6.4 Save as aforesaid, the property of and risk in the Equipment is not affected by the provisions contained in this Agreement.
Sample 1
AutoNDA by SimpleDocs
Replacement and Spare Parts. In the case of Services for which an Additional Charge is payable by the customer for replacement of spare parts, title in such replacement or spare parts shall pass to the Customer only upon full payment of the Ad- ditional Charge. Unless otherwise agreed in writing between the Parties, risk of damage to or loss of replacement spare parts shall pass to the Customer as soon as they are delivered to the Customer’s designated premises.
Sample 1
Replacement and Spare Parts. 10.1 The Supplier acknowledges that the availability of replacement and spare parts for the Goods is of crucial importance to the value of the Goods and MML’s decision to purchase the Goods from the Supplier. The Supplier undertakes that, unless otherwise agreed in writing, it shall supply any spare or replacement parts requested by MML or otherwise required to ensure that the Goods continue to be equal to the Specification and shall ensure that such spare or replacement parts are available in reasonable quantities at reasonable prices and are able to be delivered to MML within a reasonable time. 10.2 Any replacement or spare parts provided by the Supplier under this Agreement, whether as part of the provision of the Goods, shall be new and such replacement parts shall become the property of MML. 10.3 In the event that the Supplier provides replacement or spare parts, it warrants that such spare parts will: (a) be supplied in accordance with Clause 4.1; (b) not degrade the standard of the Goods; (c) not increase the Charges.
Sample 1
Replacement and Spare Parts. 6.1 In the case of Services for which an Additional Charge is payable by the customer for replacement of spare parts, title in such replacement or spare parts shall pass to the Customer only upon full payment of the Additional Charge. Unless otherwise agreed in writing between the Parties, risk of damage to or loss of replacement spare parts shall pass to the Customer as soon as they are delivered to the Customer’s designated premises. 6.2 Where parts of the Equipment have been replaced by or upon the instruction, recommendation or direction of XXXXXXXXX or otherwise, title in the replaced parts will pass to XXXXXXXXX upon removal from the Equipment.
Sample 1
Replacement and Spare Parts. 6.1 In the case of Services for which an Additional Charge is payable by the customer for replacement of spare parts, title in such replacement or spare parts shall pass to the Customer only upon full payment of the Additional Charge. Unless otherwise agreed in writing between the Parties, risk of damage to or loss of replacement spare parts shall pass to the Customer as soon as they are delivered to the Customer’s designated premises. 6.2 Where parts of the Equipment have been replaced by or upon the instruction, recommendation or direction of Siemens or otherwise, title in the replaced parts will pass to Siemens upon removal from the Equipment. 6.3 Siemens may from time to time require the Customer to purchase and store at the Site such spare parts as Siemens considers necessary for the provision of effective Services. 6.4 Siemens will not be liable for any failure or delay in providing the Services where such failure or delay is the direct or indirect result of the failure of the Customer to comply with clause 6.3. 6.5 Save as aforesaid, the property of and risk in the Equipment is not affected by the provisions contained in this Agreement.
Sample 1
Replacement and Spare Parts. 6.1 In the case of Services for which an Additional Charge is payable by the customer for replacement of spare parts, title in such replacement or spare parts shall pass to the Customer only upon full payment of the Additional Charge. Unless otherwise agreed in writing between the Parties, the risk of damage to or loss of replacement spare parts shall pass to the Customer as soon as they are delivered to the Customer’s designated premises. 6.2 Where parts of the Equipment have been replaced by or upon the instruction, recommendation or direction of MARS or otherwise, title in the replaced parts will pass to MARS upon removal from the Equipment. 6.3 MARS may from time to time require the Customer to purchase and store at the Site such spare parts as MARS considers necessary for the provision of effective Services. 6.4 MARS will not be liable for any failure or delay in providing the Services where such failure or delay is the direct or indirect result of the failure of the Customer to comply with clause 6.3. 6.5 Save as aforesaid, the property of and risk in the Equipment is not affected by the provisions contained in this Agreement.
Sample 1
Replacement and Spare Parts. 6.1. In the case of Services for which an Additional Charge is payable by the Customer for replacement of spare parts, title in such replacement or spare parts shall pass to the Customer only upon full payment of the Additional Charge. Unless otherwise agreed in writing between the Parties, risk of damage to or loss of replacement spare parts shall pass to the Customer as soon as they are delivered to the Customer’s designated premises. 6.2. Where parts of the Equipment have been replaced by or upon the instruction, recommendation or direction of Plan Group or otherwise, title in the replaced parts will pass to Plan Group upon removal from the Equipment. 6.3. Plan Group may from time to time require the Customer to purchase and store at the Site such spare parts as Plan Group considers necessary for the provision of effective Services. 6.4. Plan Group will not be liable for any failure or delay in providing the Services where such failure or delay is the direct or indirect result of the failure of the Customer to comply with clause 6.3. 6.5. Save as aforesaid, the property of and risk in the Equipment is not affected by the provisions contained in this Agreement.
Sample 1
AutoNDA by SimpleDocs

Related to Replacement and Spare Parts

  • Interconnection Facilities Engineering Procurement and Construction Interconnection Facilities, Network Upgrades, and Distribution Upgrades shall be studied, designed, and constructed pursuant to Good Utility Practice. Such studies, design and construction shall be based on the assumed accuracy and completeness of all technical information received by the Participating TO and the CAISO from the Interconnection Customer associated with interconnecting the Large Generating Facility.

  • Replacement Parts Replacement parts for goods purchased by Buyer are for the purpose of this Section defined as “Parts” (and are also considered “goods” under this Order). Unless specified otherwise by Buyer in writing, Supplier shall provide Parts (or upon Buyer’s written consent, an alternative replacement part that provides the same form, fit and function as the Part(s)) for a period of twenty (20) years after production of the goods (into which the applicable Parts are incorporated) ceases. Supplier shall continue to supply such Parts past the twenty (20) year period if Buyer orders at least twenty (20) Parts per year during such twenty-year period. The prices for any Parts purchased in the first two (2) years of the twenty-year period shall not exceed those prices in effect at the time production of the goods ceases, and no set up charges shall be permitted by Supplier or paid by Xxxxx during this two-year period. Thereafter, the prices for Parts shall be negotiated based on Supplier’s actual cost of production of such Parts plus any special packaging costs. No minimum order requirements shall apply unless the parties mutually agree in advance. After the end of the twenty-year period, Supplier shall continue to maintain in good working condition all Supplier-owned tooling required to produce the Parts and shall not dispose of such tooling without offering Buyer the right of first refusal to purchase such tooling.

  • Office Space, Equipment and Facilities Provide such office space, office equipment and office facilities as are adequate to fulfill the Adviser’s obligations hereunder.

  • All new supplies equipment and services shall include manufacturer's minimum standard warranty unless otherwise agreed to in writing. Vendor shall be legally permitted to sell all products offered for sale to TIPS Members. All goods proposed and sold shall be new unless clearly stated in writing. The Vendor shall provide timely and accurate customer support for orders to TIPS Members as agreed by the Parties. Vendors shall respond to such requests within a commercially reasonable time after receipt of the request. If support andƒor training is a line item sold or packaged with a sale, support shall be as agreed with the TIPS Member. Most TIPS Members are tax exempt and the related laws andƒor regulations of the controlling jurisdiction(s) of the TIPS Member shall apply. No assignment of Agreement may be made without the prior notification of TIPS. Written approval of TIPS shall not be unreasonably withheld. Payment for delivered goods and services can only be made to the awarded Vendor, Vendor designated reseller or vendor assigned company.

  • Accessories, Spare Parts and Tools Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

  • Spare Parts 14.1 As specified, the supplier may be required to provide any or all of the following materials, notifications, and information pertaining to spare parts manufactured or distributed by the supplier: (a) such spare parts as the purchaser may elect to purchase from the supplier, provided that this election shall not relieve the supplier of any warranty obligations under the contract and; (b) In the event of termination of production of the spare parts: (i) advance notification to the purchaser of the pending termination, in sufficient time to permit the purchaser to procure needed requirements and; (ii) Following such termination, furnishing at no cost to the purchaser, the blueprints, drawings, and specifications of the spare parts, if requested.

  • Equipment and Property A. The Grantee must ensure equipment with a per-unit cost of $5,000 or greater purchased with grant funds under this award is used solely for the purpose of this Grant or is properly pro-rated for use under this Grant. Grantee must have control systems to prevent loss, damage, or theft of property funded under this Grant. Grantee shall maintain equipment management and inventory procedures for equipment, whether acquired in part or whole with grant funds, until disposition occurs. B. When equipment acquired by Grantee under this Grant Agreement is no longer needed for the original project or for other activities currently supported by System Agency, the Grantee must properly dispose of the equipment pursuant to 2 CFR and/or TxGMS, as applicable. Upon termination of this Grant Agreement, use and disposal of equipment by the Grantee shall conform with TxGMS requirements. C. Grantee shall initiate the purchase of all equipment approved in writing by the System Agency in accordance with the schedule approved by System Agency, as applicable. Failure to timely initiate the purchase of equipment may result in the loss of availability of funds for the purchase of equipment. Requests to purchase previously approved equipment after the first quarter in the Grant Agreement must be submitted to the assigned System Agency contract manager. D. Controlled Assets include firearms, regardless of the acquisition cost, and the following assets with an acquisition cost of $500 or more, but less than $5,000: desktop and laptop computers (including notebooks, tablets and similar devices), non-portable printers and copiers, emergency management equipment, communication devices and systems, medical and laboratory equipment, and media equipment. Controlled Assets are considered supplies. E. System Agency funds must not be used to purchase buildings or real property without prior written approval from System Agency. Any costs related to the initial acquisition of the buildings or real property are not allowable without written pre-approval.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Subject to the provisions of Paragraphs 2.2 (Lessor’s warranty as to condition), 2.3 (Lessor’s warranty as to compliance with covenants, etc.), 7.2 (Lessor’s obligations to repair), 9 (damage and destruction), and 14 (condemnation), Lessee shall, at Lessee’s sole cost and expense and at all times, keep the Premises and every part thereof in good order, condition and repair, structural and non-structural (whether or not such portion of the Premises requiring repair, or the means of repairing the same, are reasonably or readily accessible to Lessee, and whether or not the need for such repairs occurs as a result of Lessee’s use, any prior use, the elements or the age of such portion of the Premises), including, without limiting the generality of the foregoing all equipment or facilities serving the Premises, such as plumbing, heating, air conditioning, ventilating, electrical, lighting facilities, boilers, fired or unfired pressure vessels, fire sprinkler and/or standpipe and hose or other automatic fire extinguishing system, including fire alarm and/or smoke detection systems and equipment, fire hydrants, fixtures, walls (interior and exterior), foundations, ceilings, roofs, floors, windows, doors, plate glass, skylights, landscaping, driveways, parking lots, fences, retaining walls, signs, sidewalks and parkways located in, on, about, or adjacent to the Premises. Lessee shall not cause or permit any Hazardous Substance to be spilled or released in, on, under or about the Premises (including through the plumbing or sanitary sewer system) and shall promptly, at Lessee’s expense, take all investigatory and/ore remedial action reasonably recommended, whether or not formally ordered or required, for the cleanup of any contamination of, and for the maintenance, security and/or monitoring of, the Premises, the elements surrounding same, or neighboring properties that was caused or materially contributed to by Lessee, or pertaining to or involving any Hazardous Substance and/or storage tank brought onto the premises by or for lessee or under its control. Lessee, in keeping the Premises in good order, condition and repair, shall exercise and perform good maintenance practices. Lessee’s obligations shall include restorations, replacements or renewals when necessary to keep the Promises and all improvements thereon or a part thereof in good order, condition and state of repair. If Lessee occupies the Premises for seven (7) years or more, lessor may require Lessee to repaint the exterior of the buildings on the Premises as reasonably required, but not more frequently than once every seven (7) years. (b) Lessee shall, at Lessee’s sole cost and expense, procure and maintain contracts, with copies to Lessor, in customary form and substance for, and with contractors specializing and experienced in, the inspection, maintenance and service of the following equipment and improvements, if any, located on the Premises: (i) heating, air conditioning and ventilation equipment, (ii) boiler, fired or unfired pressure vessels, (iii) fire sprinkler and/or standpipe and hose or other automatic fire extinguishing systems, including fire alarm and/or smoke detection. (iv) landscaping and irrigation systems, (v) roof covering and drain maintenance and (vi) asphalt and parking lot maintenance.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Maintenance Repairs and Alterations A. Except to the extent such obligations are imposed upon Landlord hereunder, Tenant shall, at its sole cost and expense, maintain the interior of the Premises in good order, condition and repair throughout the entire Lease Term, ordinary wear and tear excepted. Tenant agrees to keep the areas visible from outside the Premises in a neat, clean and attractive condition at all times. Tenant shall, within thirty (30) days after Landlord’s written demand therefor, reimburse Landlord for the cost of all repairs, replacements and alterations (collectively, “Repairs”) in and to the Premises, Building and Property and the facilities and systems thereof, plus an administration charge often percent (10%) of such cost, the need for which Repairs arises out of (and provided Landlord has given prior written notice to Tenant of such need): (1) Tenant’s use of the Premises in contravention of the terms and conditions of this Lease, or Tenant’s failure to perform maintenance or repairs which are Tenant’s obligation hereunder, (2) the installation, removal, use or operation of Tenant’s Property, if undertaken by Landlord at Tenant’s request or by virtue of Tenant’s default in undertaking such obligations, (3) the moving of Tenant’s Property into or out of the Building, or (4) the act, omission, misuse or negligence of Tenant, its agents, contractors, employees or invitees. B. Tenant shall not make or allow to be made any alterations, additions or improvements to the Premises (collectively, “Alterations”), without first obtaining the written consent of Landlord, which consent shall not be unreasonably withheld or delayed; provided however, Tenant shall have the right to perform, without Landlord’s consent, certain Alterations that do not cost in excess of $25,000.00 in the aggregate (at any one time), and do not affect any mechanical or electrical or life safety systems or plumbing in the Building, provided that advance notice has been given to Landlord in each instance. Landlord reserves the right to require Tenant to remove at the end of the Lease Term any Alterations installed without the Landlord’s consent. Prior to commencing any such Alterations and as a condition to obtaining Landlord’s consent where necessary, Tenant shall deliver to Landlord plans and specifications acceptable to Landlord; names and addresses of contractors reasonably acceptable to Landlord; copies of contracts; necessary permits and approvals; evidence of contractor’s and subcontractor’s insurance in accordance with Section 13 hereof; and a payment bond or other security, all in form and amount satisfactory to Landlord. Tenant shall be responsible for insuring that all such persons procure and maintain insurance coverage against such risks, in such amounts and with such companies as Landlord may reasonably require. All Alterations shall be constructed in a good and workmanlike manner using Building standard materials or other new materials of equal or greater quality. Landlord, to the extent reasonably necessary to avoid any disruption to the tenants and occupants of the Building, shall have the right to designate the time when any Alterations may be performed and to otherwise designate reasonable rules, regulations and procedures for the performance of work in the Building. Upon completion of the Alterations, Tenant shall deliver to Landlord “as-built” plans, contractor’s affidavits and full and final waivers of lien and receipted bills covering all labor and materials. All Alterations shall comply with the insurance requirements and with applicable codes, ordinances, laws and regulations. Tenant shall reimburse Landlord upon demand for all reasonable sums, if any, expended by Landlord for third party examination of the architectural, mechanical, electrical and plumbing plans for any Alterations. In addition, if Landlord so requests, Landlord shall be entitled to oversee the construction of any Alterations, and in such event, Tenant shall reimburse Landlord for Landlord’s actual out of pocket costs incurred in connection therewith, which may include the cost of management personnel working outside of Normal Business Hours. Landlord’s approval of Tenant’s plans and specifications for any Alterations performed for or on behalf of Tenant shall not be deemed to be representation by Landlord that such plans and specifications comply with applicable insurance requirements, building codes, ordinances, laws or, regulations or that the Alterations constructed in accordance with such plans and specifications will be adequate for Tenant’s use.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!