Unsafe Conditions In accordance with 29 CFR § 1977, occasions might arise when an employee is confronted with a choice between not performing assigned tasks or subjecting himself/herself to serious injury or death arising from a hazardous condition at the workplace. If the employee, with no reasonable alternative, refuses in good faith to expose himself/herself to the dangerous condition, he/she would be protected against subsequent discrimination. The condition causing the employee's apprehension of death or injury must be of such a nature that a reasonable person, under the circumstances then confronting the employee, would conclude that there is a real danger of death or serious injury and that there is insufficient time, due to the urgency of the situation, to eliminate the danger by resorting to regular statutory enforcement channels. In addition, in such circumstances, the employee, where possible, must also have sought from his Employer, and been unable to obtain, a correction of the dangerous condition.
Safe Conditions Whenever an employee reports a condition which the employee feels represents a violation of safety or health rules and regulations or which is an unreasonable hazard to persons or property, such conditions shall be promptly investigated. The appropriate administrator shall reply to the concern, in writing, if the employee's concern is communicated in writing.
Unsafe Working Conditions Employees shall be recognized by the Employer to have the competence to determine what constitutes unsafe working conditions within their discipline. No employee shall be disciplined for refusal to work in a situation which is deemed unsafe beyond the reasonable requirements of the employee's job.
Condition of the Contractor’s Property or Equipment The Contractor shall make the Property and/or equipment available to the Judicial Council, pursuant to the terms and conditions set forth in this Agreement. The Contractor shall immediately remedy any problem with the Property’s physical plant or equipment that impairs or diminishes the quality of the Program. The Contractor shall ensure the appropriate hot water, heating, and ventilation is provided at the Property during the Program, inclusive in the prices set forth herein.
Suspension of unsafe Construction Works (i) Upon recommendation of the Authority’s Engineer to this effect, the Authority may by notice require the Contractor to suspend forthwith the whole or any part of the Works if, in the reasonable opinion of the Authority’s Engineer, such work threatens the safety of the Users and pedestrians. (ii) The Contractor shall, pursuant to the notice under Clause 11.17 (i), suspend the Works or any part thereof for such time and in such manner as may be specified by the Authority and thereupon carry out remedial measures to secure the safety of suspended works, the Users and pedestrians. The Contractor may by notice require the Authority’s Engineer to inspect such remedial measures forthwith and make a report to the Authority recommending whether or not the suspension hereunder may be revoked. Upon receiving the recommendations of the Authority’s Engineer, the Authority shall either revoke such suspension or instruct the Contractor to carry out such other and further remedial measures as may be necessary in the reasonable opinion of the Authority, and the procedure set forth in this Clause 11.17 shall be repeated until the suspension hereunder is revoked. (iii) Subject to the provisions of Clause 21.6, all reasonable costs incurred for maintaining and protecting the Works or part thereof during the period of suspension (the “Preservation Costs”), shall be borne by the Contractor; provided that if the suspension has occurred as a result of any breach of this Agreement by the Authority, the Preservation Costs shall be borne by the Authority. (iv) If suspension of Works is for reasons not attributable to the Contractor, the Authority’s Engineer shall determine any Time Extension to which the Contractor is reasonably entitled.
Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.
Conditions of Use CLIENT acknowledges that its use of the Site is subject to and conditioned upon the following terms and agrees that TAILGATE GUYS may exercise any of the remedies set forth herein for CLIENTS failure to comply: a. CLIENT shall comply with all rules and regulations established by TAILGATE GUYS, University of Michigan, and any other applicable authority, including but not limited to parking regulations in effect on campus. A copy of current rules and regulations is attached hereto as Exhibit A, which shall be subject to adjustment at any time by TAILGATE GUYS, University of Michigan or other applicable authorities. b. CLIENT shall be permitted to access the Site at the respective times set forth in the rules or otherwise determined by TAILGATE GUYS and University of Michigan. c. CLIENT acknowledges all risks related to its attendance and use of the site, including risk of damage to or loss of property or risk of serious personal injury or death, and accepts sole responsibility for such risks. CLIENT shall secure all personal property in and around the Site and shall take all precautions necessary to prevent theft or destruction thereof. CLIENT expressly acknowledges and agrees that TAILGATE GUYS shall not be responsible for any personal property of or injury to CLIENT at any time. TAILGATE GUYS will not remove or hold for safe-keeping any personal items left on the Site after event closing and same will be subject to removal by University of Michigan facilities. CLIENT may be subject to costs and fees associated with such removal. d. Eligibility for any TAILGATE GUYS drop off service is determined by Tailgate Guys in its sole discretion and is based on University restrictions, staffing availability and other factors. If CLIENT is eligible to participate in any TAILGATE GUYS drop off service, the CLIENT is responsible for properly packaging all items that will be transported and otherwise agrees to comply with procedures established by TAILGATE GUYS for this “drop off service,” including but not limited to any limitations with regard to the amount and size of items to be transported. TAILGATE GUYS will not be responsible for any damaged or broken items during unloading or loading and transportation to or from the Site. e. CLIENT shall respect the interests of other fans and clients of TAILGATE GUYS and shall not engage in or permit disorderly or offensive conduct in or around the Site. CLIENT further agrees not to exceed the maximum number of guests allowed within the as set forth in the Exhibit A. Should CLIENT violate these provisions, TAILGATE GUYS management will give CLIENT a verbal warning. If CLIENT fails to promptly come into compliance, TAILGATE GUYS may immediately revoke CLIENT’s rights to the Site and in its sole and absolute discretion terminate this Agreement. Upon such revocation or termination, all amounts paid to TAILGATE GUYS with be forfeited by CLIENT and retained by TAILGATE GUYS. f. CLIENT shall not move, alter, or disrupt operation of any media equipment provided by TAILGATE GUYS. In the event of inclement weather, TAILGATE GUYS reserves the exclusive right to cover and protect all equipment associated with the Media Package with such materials and coverings as it deems appropriate, which may include gator covers or hard cases for TV’s, plastic bags for receivers and generators or the like (collectively, the "Protective Equipment"). CLIENT shall not remove any Protective Equipment or items contained inside Protective Equipment, and expressly acknowledges and agrees that only TAILGATE GUYS staff shall have authority to do so. CLIENT acknowledges and agrees that its right to use the media equipment may be suspended, without refund, at TAILGATE GUYS option, for violation of these provisions, and CLIENT further assumes all responsibility for any damages to media equipment resulting from violation of these provisions and shall reimburse TAILGATE GUYS for the cost to repair or replace damaged equipment. g. CLIENT shall keep the Site in a neat and orderly manner at all times and may incur fees set forth on Exhibit A, attached hereto and made a part hereof. h. CLIENT acknowledges and agrees that the signage identifying each Site is uniform and provided by TAILGATE GUYS, who reserves the right to omit any vulgar, offensive or discriminatory content requested by CLIENT, in the sole and absolute discretion of TAILGATE GUYS. i. TAILGATE GUYS reserves the right to immediately terminate CLIENT’s use of the Site for violation of the conditions of use. In addition, CLIENT shall be responsible for payment of all damages incurred by TAILGATE GUYS as a result of CLIENT’s failure to comply with the foregoing conditions of use or as a result of damages by CLIENT of any equipment of TAILGATE GUYS. To insure compliance and payment of damages or fines, CLIENT agrees to keep a credit card on file with TAILGATE GUYS, and hereby authorizes TAILGATE to charge said credit card amounts owing as a result of its breach; provided that TAILGATE GUYS delivers to CLIENT an itemization of said charges and receipt for payment thereof.
Unsafe Work Conditions No Employee shall be disciplined for refusal to work on a job which in the opinion of: (a) A member of a safety committee; or (b) A person designated by a safety committee; or (c) A safety officer after an on-site inspection and following discussion with a representative of the Employer, does not meet the standards established pursuant to the Workers' Compensation Act.
Additional Requirements for Sleeping Rooms The Contractor shall provide departing Attendees a secured area for storing belongings.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
