Requirements for Membership Sample Clauses

Requirements for Membership. Requirements for joining the EMS Interlocal Cooperative shall include all of the following: A. The applicant jurisdiction shall approve and execute this EMS Interlocal Cooperation Agreement. B. The applicant jurisdiction shall adopt and enforce the Uniform EMS Ordinance, which is attached hereto as Exhibit A, “Uniform Ordinance for Emergency Medical Services”, or an abbreviated ordinance that is mutually agreeable to the applicant jurisdiction or Non-Beneficiary Member Jurisdiction and the Authority, which can include less stringent response time requirements in the Non-Beneficiary Member Jurisdiction, and as that ordinance may be amended by the Beneficiary Jurisdictions as defined below in paragraph C of Section 2. C. Such abbreviated ordinance requirements shall not change the system standard of care, the system status plan, the clinical quality requirements for ambulance services, the medical protocols or the medical oversight requirements (“Ordinance Standard of Care Provisions”), and any changes by such applicant jurisdiction or Non-Beneficiary Member Jurisdiction to the Ordinance Standard of Care Provisions shall result in automatic disqualification for membership in this Amended and Restated EMS Interlocal Cooperative.
Sample 1
AutoNDA by SimpleDocs
Requirements for Membership. Any person who wishes to be a member of LWB may join, regardless of their occupation; however, in order to enjoy all the professional development & training all members entering into a membership contract with LWB must be in possession of a valid passport.
Sample 1
Requirements for Membership. Active members: a. Any ASEA Member as of the effective date of these Revised Operating Prin- ciples shall continue to be an ASEA Member so long as they remain a cre- dentialed member of ASPPA.
Sample 1
Requirements for Membership. Any adult person, firm, association, corporation or body politic or subdivision thereof may become a member in Park Electric Cooperative, Inc., (hereinafter called the "Cooperative") upon receipt of electric service from the Cooperative, provided that he or it has first: (a) Signed a membership Agreement, (b) Agreed to purchase from the Cooperative electric energy as hereinafter specified; and (c) Agreed to comply with and be bound by the articles of incorporation and the bylaws of the Cooperative and any rules and regulations adopted by the Board of Trustees; and No member may hold more than one membership in the Cooperative, and no membership in the Cooperative shall be transferable, except as provided in these bylaws.
Sample 1
Requirements for Membership. 1. Active members: a. Any ASEA Member as of the effective date of these Revised Operating Principles shall continue to be an ASEA Member so long as they remain a credentialed member of ASPPA. b. An enrolled actuary who is in good standing with the JBEA but does not hold an MSPA or FSPA designation who wishes to become a Member of ASEA shall submit to the ASPPA Membership Committee such information as deemed appropriate by such Committee and shall become a member of ASEA upon being approved for the MSEA or FSEA designation.
Sample 1
Requirements for Membership. Requirements for joining the Ossining-New Castle Ambulance IMA shall include all of the following: A. The applicant jurisdiction shall approve and execute this Ambulance IMA. B. The applicant jurisdiction shall be approved for membership by the then current member municipalities. C. The pro-rata subsidy requirements for each jurisdiction shall be adjusted to reflect the added savings and/or costs of the new jurisdiction.
Sample 1
Requirements for Membership 
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Requirements for Membership

  • Membership Requirements 5. Exclusions from the Bargaining Unit

  • Requirements for E- Bidders 3.1. For Individual/ Joint E-Bidders, the following documents shall be uploaded during online registration; 3.1.1. Copy of Identification Documents (both sides) 3.1.2. Evidence of deposit payment 3.2. For Agent acting for Individual/ Joint Online Bidders, the following documents shall be uploaded during online registration; 3.2.1. Copy of Identification Documents (both sides) of Individual/ Joint Online Bidder 3.2.2. Copy of Identification Documents (both sides) of Agent 3.2.3. Copy of letter of authorization to bid 3.2.4. Evidence of deposit payment 3.3. For Company, the following documents shall be uploaded during online registration: 3.3.1. Copy of Identification Documents (both sides) of the representative. 3.3.2. Copy of letter of authorization to bid under the Company’s Letter Head 3.3.3. Form 24; Form 44; Form 49 (or their equivalent forms under the Companies Act 2016)

  • Requirements for Transfer (a) This Warrant and the Warrant Shares shall not be sold or transferred unless either (i) they first shall have been registered under the Securities Act of 1933, as amended (the "Act"), or (ii) the Company first shall have been furnished with an opinion of legal counsel, reasonably satisfactory to the Company, to the effect that such sale or transfer is exempt from the registration requirements of the Act. (b) Notwithstanding the foregoing, no registration or opinion of counsel shall be required for (i) a transfer by a Registered Holder which is a corporation to a wholly owned subsidiary, parent or affiliate of such corporation, a transfer by a Registered Holder which is a partnership to a partner of such partnership or a retired partner of such partnership or to the estate of any such partner or retired partner, or a transfer by a Registered Holder which is a limited liability company to a member of such limited liability company or a retired member or to the estate of any such member or retired member, provided that the transferee in each case agrees in writing to be subject to the terms of this Section 4, or (ii) a transfer made in accordance with Rule 144 under the Act. (c) Each certificate representing Warrant Shares shall bear a legend substantially in the following form: "The securities represented by this certificate have not been registered under the Securities Act of 1933, as amended, and may not be offered, sold or otherwise transferred, pledged or hypothecated unless and until such securities are registered under such Act or an opinion of counsel satisfactory to the Company is obtained to the effect that such registration is not required." The foregoing legend shall be removed from the certificates representing any Warrant Shares, at the request of the holder thereof, at such time as they become eligible for resale pursuant to Rule 144(k) under the Act.

  • MEMBERSHIP REQUIREMENT 1. All employees covered by this Collective Agreement shall, as a condition of employment, become and remain members of the British Columbia Teachers’ Federation and the local(s) in the district(s) in which they are employed, subject to Article A.3.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Certain State Law Requirements for Contracts The contents of this Section are required by Texas Law and are included by County regardless of content. For purposes of Sections 2252.152, 2271.002, and 2274.002, Texas Government Code, as amended, C&T hereby verifies that C&T and any parent company, wholly owned subsidiary, majority-owned subsidiary, and affiliate: a. Unless affirmatively declared by the United States government to be excluded from its federal sanctions regime relating to Sudan or Iran or any federal sanctions regime relating to a foreign terrorist organization, is not identified on a list prepared and maintained by the Texas Comptroller of Public Accounts under Sections 806.051, 807.051, or 2252.153 of the Texas Government Code. b. If employing ten (10) or more full-time employees and this Agreement has a value of

  • Requirements for Protection In compliance with NPCC requirements and Good Utility Practice, Developer shall provide, install, own, and maintain relays, circuit breakers and all other devices necessary to remove any fault contribution of the Large Generating Facility to any short circuit occurring on the New York State Transmission System not otherwise isolated by Connecting Transmission Owner’s equipment, such that the removal of the fault contribution shall be coordinated with the protective requirements of the New York State Transmission System. Such protective equipment shall include, without limitation, a disconnecting device or switch with load- interrupting capability located between the Large Generating Facility and the New York State Transmission System at a site selected upon mutual agreement (not to be unreasonably withheld, conditioned or delayed) of the Developer and Connecting Transmission Owner. Developer shall be responsible for protection of the Large Generating Facility and Developer’s other equipment from such conditions as negative sequence currents, over- or under-frequency, sudden load rejection, over- or under-voltage, and generator loss-of-field. Developer shall be solely responsible to disconnect the Large Generating Facility and Developer’s other equipment if conditions on the New York State Transmission System could adversely affect the Large Generating Facility.

  • SERVICE REQUIREMENTS FOR REFERRED CLIENTS A. Agent agrees to respond to any communications from a Referred Client within two (2) hours after receipt if such communication is received between 9:00am to 5:00pm local time. For communications received outside of these hours, Agent agrees to respond by 10:00am the next day. B. Agent agrees to update XXXX.xxx with status updates within 48 hours after initial communication with a Referred Client and upon every significant status change until closing or abandoned. Updates shall be made by Agent via email to xxxxxxxxxxxx@xxxx.xxx. C. Vacations or extended absences shall be reported, with length of pause, to XXXX.xxx via email to D. Agent will not add Referred Client to any email list or calling list without the express permission of Referred Client. E. Agent agrees XXXX.xxx has the right to survey the Referred Client at any time. F. If Agent is contacted by a Referred Client that Agent is unwilling or unable to assist, Agent shall direct such Referred Client back to XXXX.xxx for assistance and notify XXXX.xxx at xxxxxxxxxxxx@xxxx.xxx. G. Agent agrees that XXXX.xxx has no obligation to provide Agent with any number of referrals and that prospective clients are free to select the agent they wish to work with for any particular real estate transaction.

  • Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!