Common use of ROUTE AND DESIGN STUDIES Clause in Contracts

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE05-E678-4FDA-9A15-CD435C82F2FA Contract No. 36-7IDP5034 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE05AF0A5C71-E67820F3-4FDA-9A15481C-96D9-CD435C82F2FA 9B6E48645CA8 Contract No. 36-7IDP5034 7IDP5032 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE050D2F7E90-E6785707-4FDA-9A154244-CD435C82F2FA B1F8-5FC3612CC484 Contract No. 36-7IDP5034 7IDP5033 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE05CA9F0A59-E67874CF-45EC-4FDA-9A15A0BA-CD435C82F2FA DA5EDEFB2344 Contract No. 36-7IDP5034 7IDP5025 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE05D48DDB49-E6783B26-4FDA-9A154601-CD435C82F2FA BF7C-3027905768B1 Contract No. 36-7IDP5034 7IDP5026 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE05531A9DDE-2967-E6784B7D-96AD-4FDA-9A15-CD435C82F2FA B570C85CF1EE Contract No. 36-7IDP5034 7IDP5028 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE05CB4D4692-E6783486-4FDA-9A154327-CD435C82F2FA 9EA0-F7A661B6ACDF Contract No. 36-7IDP5034 7IDP5031 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.

ROUTE AND DESIGN STUDIES. The Engineer shall prepare an alignment and proposed roadway schematic layout to include projected traffic volumes, existing and proposed typical sections. The Engineer shall furnish Microsoft Office and Microstation V8i-Geopak computer generated media containing the roadway schematic layout to the State. All supporting attachments and exhibits shall accompany the schematic layout. All Microstation and Geopak computer generated files containing the roadway DocuSign Envelope ID: 1065CE0577A45C0A-6CA6-E6784436-4FDA-9A15AA61-CD435C82F2FA FD6DAA5DDC8C Contract No. 36-7IDP5034 7IDP5049 design schematic shall be compatible with the software used by the State. The Engineer shall produce, obtain, review, and evaluate existing and twenty-year projected traffic data for use in the preparation of the schematic design layout. The data shall be utilized in accordance with the requirements for schematic development and consistent with the policies of the State. The Engineer shall prepare preliminary drawings to identify any potential adverse impacts within the project corridor. Identification of all existing and proposed utilities (public and private), structures, burial grounds, neighborhood communities, historical landmarks, and undeveloped areas is required. Any potential utility conflicts and structural impediments must be identified as such. The Engineer shall propose alternative alignments which would avoid or minimize displacements and damages, and prepare any additional attachments or exhibits required illustrating a preferred alternative alignment. The Engineer shall render assistance to the State for agency meetings as necessary during the development of the schematic design as requested by the State. The Engineer shall also render assistance to the State for meetings with affected property owners (MAPOs), public meetings and a public hearing if requested.