Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals and guidelines. The Engineer shall assemble and complete all applicable State Standard Details sheets.
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals and guidelines. The Engineer shall assemble and complete all applicable State Standard Details sheets.
1. Attend preconstruction meeting
2. Attend partnering meeting
3. Attend field meetings and make visits to site
4. Calculate quantities and assist the area engineer in preparing change orders
5. Review and approval of shop drawings
6. Review and approval of forming details
7. Responding to requests for information (RFIs)
8. Providing minor redesign (major redesign should be handled with a contract supplement), which will include changes to the affected plan sheets and an updated copy of the 3D model (if applicable).
9. Answering general questions
10. Providing clarification
11. Other project related tasks in support of the State during construction
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above- listed manuals and guidelines. The Engineer shall assemble and complete all applicable State Standard Details sheets. CONSTRUCTION PHASE SERVICES
1. Attend preconstruction meeting
2. Attend partnering meeting
3. Attend field meetings and make visits to site
4. Calculate quantities and assist the area engineer in preparing change orders DocuSign Envelope ID: 4EB23D04-0FA8-470B-A4D7-463E9090543B
5. Review and approval of shop drawings
6. Review and approval of forming details
7. Responding to requests for information (RFIs)
8. Providing minor redesign (major redesign should be handled with a contract supplement), which will include changes to the affected plan sheets and an updated copy of the 3D model (if applicable).
9. Answering general questions
10. Providing clarification
11. Other project related tasks in support of the State during construction
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals and guidelines. The Engineer shall assemble and complete all applicable TxDOT Standard Details sheets.
i. Perform calculations for design of bridge abutments.
ii. Perform calculations for bridge slab design.
iii. Perform calculations to determine elevations of bridge substructure and super structure elements.
iv. Perform calculations for bridge box beam design.
v. Prepare necessary foundation details and plan sheets.
vi. Prepare plan sheets for abutment design.
vii. Prepare plan sheets for additional abutment details.
viii. Prepare framing plan and slab plan sheets.
ix. Compute and prepare tables for slab and bearing seat elevations, dead load deflections, etc.
x. Design beams and prepare beam design tables.
xi. Prepare special provisions and special specifications in accordance to the above-listed manuals and guidelines.
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals. Additionally, the Engineer shall perform the following tasks:
1. Perform calculations for design of bridge abutments.
2. Perform calculations for bridge slab design.
3. Perform calculations to determine elevations of bridge substructure and super structure elements.
4. Perform calculations for bridge box beam design.
5. Prepare necessary foundation details and plan sheets.
6. Prepare plan sheets for abutment design.
7. Prepare plan sheets for additional abutment details.
8. Prepare framing plan and slab plan sheets.
9. Compute and prepare tables for slab and bearing seat elevations, dead load deflections, etc.
10. Design beams and prepare beam design tables.
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals and guidelines. The Engineer shall assemble and complete all applicable State Standard Details sheets.
1. Perform calculations for design of bridge abutments.
2. Perform calculations for design of bridge xxxxx
3. Perform calculations for bridge slab design.
4. Perform calculations to determine elevations of bridge substructure and super structure elements.
5. Prepare necessary foundation details and plan sheets.
6. Prepare plan sheets for abutment design.
7. Prepare plan sheets for additional abutment details.
8. Prepare framing plan and slab plan sheets.
9. Compute and prepare tables for slab and bearing seat elevations, dead load deflections, etc. DocuSign Envelope ID: DADDA27D-207C-44D8-A3A7-49A72052A5A9
10. Design beams and prepare beam design tables.
11. Prepare special provisions and special specifications in accordance to the above-listed manuals and guidelines.
12. Perform bent caps calculations
13. Prepare plan sheets for xxxxx. XXXX @ Xxxx Xxx Xxxxxxx EB30FR 696+00.00 755+30.00 WBFR @ Lake Xxx Xxxxxxx WB30FR 696+10.50 753+15.50 REXBAY RAMP REXBAY 21+01.59 25+49.59 RWXBASS RAMP RWXBASS WBFR XXXX 17+34.78 REEBASS RAMP REEBASS 14+35.00 17+11.00 BAYSIDE EB TURNAROUND BAYSIDE 15+30.00 17+70.00 BAYSIDE DR BAYSIDE 15+30.00 17+70.00 BAYSIDE WB TURNAROUND BAYSIDE 15+30.00 00+00.00 XXXXXXX XX XX XXXXXXX XX 20+60.70 37+90.56 XXXX @ Lake Xxx Xxxxxxx EB30FR 6+06.00 125+25.00 REXHOR RAMP REXHOR 21+13.00 22+44.50 WBFR @ Lake Xxx Xxxxxxx WB30FR 14+99.00 138+01.50 REEDAL RAMP REEDAL 13+54.84 15+18.84 HORIZON EB TURNAROUND HORIZON 8+26.80 10+96.80 HORIZON RD HORIZON 8+55.00 11+25.00 HORIZON WB TURNAROUND HORIZON 8+83.20 11+53.20 RWXDAL RAMP RWXDAL 33+23.00 39+55.00 DocuSign Envelope ID: DADDA27D-207C-44D8-A3A7-49A72052A5A9
Bridge Structural Details. The Consultant shall prepare each structural design and develop detailed structural drawings of requireddetails in compliance with above-listed manuals and guidelines. The Consultant shall assemble and complete applicable CITY Standard Details sheets. Additionally, the Consultant shall: Perform calculations for design of bridge abutments Perform calculations to determine elevations of bridge substructure and super structure elements Prepare necessary foundation details and plan sheets Prepare plan sheets for abutment design Prepare plan sheets for additional abutment details Compute and prepare tables for slab and bearing seat elevations, dead load deflections, etc. Prepare special provisions and special specifications in accordance to the above-listed manuals andguidelines The following services are not included in this scope of work and would be considered additional services: Structural design and details for superstructure elements including bridge slabs, railings, andbeams No design or detailing of steel elements are included. Bearing elements other neoprene bearing pads.
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings for the IH35 overpass widening over US290. It is anticipated the bridge will be widened in kind to match the existing structure type; prestressed concrete beams for the superstructure and inverted-T caps for the substructure. The columns will be exposed aggregate to match the existing columns.
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals and guidelines. The Engineer shall assemble and complete all applicable State Standard Details sheets. Additionally, the Engineer shall: o Perform calculations for design of bridge abutments. o Perform calculations for bridge slab design. o Perform calculations to determine elevations of bridge substructure and super structure elements. o Perform calculations for bridge box beam design. o Prepare necessary foundation details and plan sheets. o Prepare plan sheets for abutment design. o Prepare plan sheets for additional abutment details. o Prepare framing plan and slab plan sheets. o Compute and prepare tables for slab and bearing seat elevations, dead load deflections, etc. o Design beams and prepare beam design tables. o Prepare special provisions and special specifications in accordance to the above- listed manuals and guidelines. The Engineer shall provide Construction Phase Services at the written request of the State’s Project Manager. The written request must include a description of the work requested, a mutually agreed upon time limit, and any special instructions for coordination and submittal. These services shall include, but are not limited to the following:
1. Attend preconstruction meeting
2. Attend partnering meeting
3. Attend field meetings and make visits to site
4. Calculate quantities and assist the area engineer in preparing change orders
Bridge Structural Details. The Engineer shall prepare each structural design and develop detailed structural drawings of all required details in compliance with above-listed manuals and guidelines. The Engineer shall assemble and complete all applicable State Standard Details sheets. Additionally, the Engineer shall: o Perform calculations for design of bridge abutments. o Perform calculations for bridge slab design. o Perform calculations to determine elevations of bridge substructure and super structure elements. o Perform calculations for bridge box beam design. o Prepare necessary foundation details and plan sheets. o Prepare plan sheets for abutment design. o Prepare plan sheets for additional abutment details. o Prepare framing plan and slab plan sheets. o Compute and prepare tables for slab and bearing seat elevations, dead load deflections, etc. o Design beams and prepare beam design tables. o Prepare special provisions and special specifications in accordance to the above-listed manuals and guidelines. The Engineer shall provide Construction Phase Services at the written request of the State’s Project Manager. The written request must include a description of the work requested, a mutually agreed upon time limit, and any special instructions for coordination and submittal. These services may include, but are not limited to the following:
1. Attend preconstruction meeting
2. Attend partnering meeting
3. Attend field meetings and make visits to site
4. Calculate quantities and assist the area Engineer in preparing change orders
5. Review and approval of shop drawings DocuSign Envelope ID: 6DA01770-719C-4EFF-A344-425189FAC6FB
6. Review and approval of forming details
7. Responding to requests for information (RFIs)
8. Providing minor redesign (major redesign should be handled with a contract supplement), which will include changes to the affected plan sheets and an updated copy of the 3D model (if applicable).
9. Answering general questions
10. Providing clarification
11. Other project related tasks in support of the State during construction.
