Ohio Preference The Recipient shall, to the extent practicable, use and shall cause all of its Contractors and subcontractors to use Ohio products, materials, services and labor in connection with the Project pursuant to Section 164.05(A)(6) of the Revised Code;
Shift Preference 200 Shift preference will be granted on the basis of seniority within the classification as openings occur. The transfer to the desired shift will be effected within two (2) weeks following the end of the current pay period within which a written request is made, provided the employee can do the work.
a. An employee who is assigned to a specific shift based on his/her request shall remain assigned to that shift and not be eligible for another shift preference transfer for a period of six (6) months.
RECIPROCAL PREFERENCE In the event the lowest responsive and responsible bid submitted in response to any Invitation for Bids is by a bidder whose principal place of business is in a county other than Orange County, and such county grants a bid preference for purchases to a bidder whose principal place of business is in such county, then Orange County may award a preference to the (next) lowest responsive and responsible bidder having a principal place of business within Orange County, Florida. Such preference will be equal to the preference granted by the county in which the lowest responsive and responsible bidder has its principal place of business except as provided below.
BID PREFERENCE In accordance with the Minority Women Owned Business Enterprise (MWBE) Ordinance, award of a contract resulting from this Invitation for Bids may be made to the lowest responsive and responsible Orange County certified MWBE bidder provided that the bid does not exceed the overall lowest responsive and responsible bidder by the following percentages for the bid amounts listed: A. 8% - Bids Up To $100,000 In accordance with the Registered Service Disabled Veteran Business Ordinance, award of a contract resulting from this Invitation for Bids may be made to the lowest responsive and responsible registered prime Service Disabled Veteran bidder provided that the bid does not exceed the overall lowest responsive and responsible bidder by the following percentages for the bid amounts listed: A. 8% - Bids Up To $100,000
Veteran’s Preference In the employment of labor (excluding executive, administrative, and supervisory positions), the contractor and all sub-tier contractors must give preference to covered veterans as defined within Title 00 Xxxxxx Xxxxxx Xxxx Xxxxxxx 00000. Covered veterans include Vietnam-era veterans, Persian Gulf veterans, Afghanistan-Iraq war veterans, disabled veterans, and small business concerns (as defined by 15 U.S.C. 632) owned and controlled by disabled veterans. This preference only applies when there are covered veterans readily available and qualified to perform the work to which the employment relates.
Order of Preference In the case of any inconsistency or conflict among the specific provisions of the State Entity Standard Contract Terms and Conditions (including any amendments accepted by both the State Entity and the Contractor attached hereto), the RFX (including any subsequent addenda), and the Contractor’s Response, any inconsistency or conflict shall be resolved as follows:
(i) First, by giving preference to the specific provisions of the State Entity Standard Contract Terms and Conditions.
(ii) Second, by giving preference to the specific provisions of the RFX.
(iii) Third, by giving preference to the specific provisions of the Contractor’s Response, except that objections or amendments by a Contractor that have not been explicitly accepted by the State Entity in writing shall not be included in this Contract and shall be given no weight or consideration.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Relative Rights and Preferences Unless the establishing resolution or any other resolution adopted pursuant to Section 2.3 otherwise provides, Shares of each Portfolio or Class thereof established hereunder shall have the following relative rights and preferences:
(a) Except as set forth in paragraph (e) of this Section 2.5, each Share of a Portfolio, regardless of Class, shall represent an equal pro rata interest in the assets belonging to such Portfolio and shall have identical voting, dividend, liquidation and other rights, preferences, powers, restrictions, limitations, qualifications and designations and terms and conditions with each other Share of such Portfolio.
(b) Shareholders shall have no preemptive or other right to subscribe to any additional Shares or other securities issued by the Trust or the Trustees, whether of the same or other Portfolio (or Class).
(c) All consideration received by the Trust for the issue or sale of Shares of a particular Portfolio, together with all assets in which such consideration is invested or reinvested, all income, earnings, profits, and proceeds thereof, including any proceeds derived from the sale, exchange, or liquidation of such assets, and any funds or payments derived from any reinvestment of such proceeds in whatever form the same may be, shall be held and accounted for separately from the other assets of the Trust and of every other Portfolio and may be referred to herein as "assets belonging to" that Portfolio. The assets belonging to a particular Portfolio shall belong to that Portfolio for all purposes, and to no other Portfolio, subject only to the rights of creditors of that Portfolio. In addition, any assets, income, earnings, profits or funds, or payments and proceeds with respect thereto, which are not readily identifiable as belonging to any particular Portfolio shall be allocated by the Trustees between and among one or more of the Portfolios in such manner as the Trustees, in their sole discretion, deem fair and equitable. Each such allocation shall be conclusive and binding upon the Shareholders of all Portfolios thereof for all purposes, and such assets, income, earnings, profits, or funds, or payments and proceeds with respect thereto shall be assets belonging to that Portfolio.
(d) Each Class of a Portfolio shall have a proportionate undivided interest (as determined by or at the direction of, or pursuant to authority granted by, the Trustees, consistent with industry practice) ("Proportionate Interest") in the net assets belonging to that Portfolio. References herein to assets, expenses, charges, costs, and reserves "allocable" or "allocated" to a particular Class of a Portfolio shall mean the aggregate amount of such item(s) of the Portfolio multiplied by the Class's Proportionate Interest.
(e) A particular Portfolio shall be charged with the liabilities of that Portfolio, and all expenses, costs, charges and reserves attributable to any particular Portfolio shall be borne by such Portfolio; provided that the Trustees may, in their sole discretion, allocate or authorize the allocation of particular expenses, costs, charges, and/or reserves of a Portfolio to fewer than all the Classes thereof. Class Expenses shall, in all cases, be allocated to the Class for which such Class Expenses were incurred. Any general liabilities, expenses, costs, charges or reserves of the Trust (or any Portfolio) that are not readily identifiable as chargeable to or bearable by any particular Portfolio (or any particular Class) shall be allocated and charged by the Trustees between or among any one or more of the Portfolios (or Classes) in such manner as the Trustees in their sole discretion deem fair and equitable. Each such allocation shall be conclusive and binding upon the Shareholders of all Portfolios (or Classes) for all purposes. Without limitation of the foregoing provisions of this Section 2.5(e), (i) the debts, liabilities, obligations and expenses incurred, contracted for or otherwise existing with respect to a particular Portfolio shall be enforceable against the assets of such Portfolio only, and not against the assets of the Trust generally or assets belonging to any other Portfolio, and (ii) none of the debts, liabilities, obligations and expenses incurred, contracted for or otherwise existing with respect to the Trust generally that have not been allocated to a specified Portfolio, or with respect to any other Portfolio, shall be enforceable against the assets of such specified Portfolio. Notice of this contractual limitation on inter-Portfolio liabilities is set forth in the Trust's Certificate of Trust described in Section 1.4, and, accordingly, the statutory provisions of Section 3804 of the Delaware Act relating to limitations on inter-Portfolio liabilities (and the statutory effect under Section 3804 of setting forth such notice in the Certificate of Trust) are applicable to the Trust and each Portfolio.
(f) Except as provided for in Section 2.10, shares redeemed or repurchased by a Portfolio or the Trust shall be deemed to be canceled.
(g) The Trust may issue Shares in fractional denominations of 1/1000th of a Share or integral multiples thereof to the same extent as its whole Shares, and Shares in fractional denominations shall be Shares having proportionately to the respective fractions represented thereby all the rights of whole Shares of the same Portfolio (or Class), including without limitation, the right to vote, the right to receive dividends and distributions and the right to participate upon termination of the Trust or any Portfolio, but excluding the right to receive a certificate representing fractional Shares. All references to Shares in this Agreement shall be deemed to be shares of any or all Portfolios, or Classes thereof, as the context may require. All provisions herein relating to the Trust shall apply equally to each Portfolio of the Trust, and each Class thereof, except as the context otherwise requires.
Liquidation Preference (a) In the event of any liquidation, winding up or dissolution of the Corporation, whether voluntary or involuntary, each Holder shall be entitled to receive in respect of its shares of Series A Preferred Stock and to be paid out of the assets of the Corporation legally available for distribution to its stockholders, after satisfaction of liabilities to the Corporation’s creditors and holders of shares of Senior Stock and before any payment or distribution is made to holders of Junior Stock (including the Common Stock), the Liquidation Preference per share of Series A Preferred Stock plus an amount equal to all accumulated and unpaid dividends on such shares, whether or not declared, to, but not including the date fixed for liquidation, winding up or dissolution.
(b) Neither the sale, conveyance, exchange or transfer of all or substantially all the assets or business of the Corporation (other than in connection with the liquidation, winding up or dissolution of the Corporation), nor the merger or consolidation of the Corporation into or with any other Person, nor any share exchange or division involving the Corporation pursuant to applicable statutes providing for the consolidation, merger, share exchange or division, shall be deemed to be a liquidation, winding up or dissolution, whether voluntary or involuntary, for the purposes of this Section 7, notwithstanding that, for other purposes, such as for tax purposes, such an event may constitute a liquidation, dissolution or winding up. In addition, no payment shall be made to Holders pursuant to this Section 7 upon the liquidation, dissolution or winding up, whether voluntary or involuntary, of any of the Corporation’s Subsidiaries or upon any reorganization of the Corporation’s Subsidiaries with or without the approval of the Corporation’s stockholders.
(c) After the payment to the Holders of the shares of Series A Preferred Stock of full preferential amounts provided for in this Section 7, the Holders of Series A Preferred Stock as such shall have no right or claim to any of the remaining assets of the Corporation.
(d) In the event the assets of the Corporation available for distribution to the Holders and holders of shares of Parity Stock upon any liquidation, winding up or dissolution of the Corporation, whether voluntary or involuntary, shall be insufficient to pay in full all amounts to which such holders are entitled pursuant to this Section 7, such Holders and such holders of shares of Parity Stock shall share, equally and ratably in proportion to the respective full amounts to which such holders are entitled pursuant to this Section 7, in any distribution of the assets of the Corporation.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
