Selection of Architect and Engineer Sample Clauses

Selection of Architect and Engineer. It is acknowledged that a ----------------------------------- project architect has already been selected. Such architect, and any replacement or substitute architect hired in accordance with this Agreement, is referred to herein as the "Architect." Consultant shall provide advice and assistance to the Tribal Corporation in determining the terms of and causing to be prepared an owner/architect agreement with an Architect (such agreement and any substitute agreement therefor shall be referred to as the "Owner/Architect Agreement"). The Owner/Architect Agreement shall provide that the Architect shall provide the following services (the "Architect Services"): (1) design the Facility; (2) prepare plans and specifications for the construction of the Facility; (3) inspect the Facility and review the appropriateness of requests for payments submitted by the Contractor (as hereinafter defined) during the construction of the Facility; and (4) notify the Tribal Corporation of the substantial completion of the Facility and determine the timing of the final payment to the Contractor. In the event it should become necessary to replace said architect or engage an additional architect, the following shall apply:
Sample 1
AutoNDA by SimpleDocs
Selection of Architect and Engineer. The selection of any architect or engineer retained by the Company in connection with the construction of any tenant or other improvements to be constructed by the Company and the terms of any contract entered into by and between the Company and any such architect or engineer (and any amendment, modification or termination of any contract entered into by the Company with any architect or engineer);
Sample 1
Selection of Architect and Engineer. Tenant’s architect shall be Xxx Xxxxxxx, and Tenant’s engineers shall be Xxxxxxx Xxxx Engineering (electrical engineer ) and Xxxxx Engineering (mechanical engineering). Landlord hereby approves such architect and engineers for the design of the Tenant Improvements. Notwithstanding the foregoing, Tenant may, at its option, retain an architect or engineer other than those listed above, subject to Landlord’s reasonable approval, which approval shall not be unreasonably withheld. All
Sample 1
Selection of Architect and Engineer. Subject to Lessee’s approval, not to be unreasonably withheld, conditioned or delayed, Lessor shall select an architect (“Designer”) and an engineer (“Engineer”) familiar with all rules, regulations, instructions and procedures promulgated by Lessor with respect to design and/or construction in the Building (collectively, the “Building Requirements”) and with all Applicable Laws. Lessee’s failure to approve the selection of the Engineer or the Designer within three (3) business days of Lessor’s delivery of written notice of such selection to Lessee shall be deemed Tenant Delay. Thereafter, Lessor shall engage and manage the Designer and Engineer. If, following the engagement of the Designer or the Engineer, Lessor unilaterally decides to terminate either the Designer or the Engineer, any delay in the Substantial Completion of the Work caused by or attributable to such termination shall be deemed Lessor Delay. If, following the engagement of the Designer or the Engineer, Lessee unilaterally decides to direct Lessor to terminate either the Designer or the Engineer, any delay in the Substantial Completion of the Work caused by or attributable to such termination shall be deemed Tenant Delay. If Lessor and Lessee mutually decide to terminate the Designer or the Engineer, the parties shall execute a Change Order to revise the construction schedule to account for any delay in the Substantial Completion of the Work, and there shall be no Tenant Delay or Lessor Delay associated with such mutual termination.
Sample 1
Selection of Architect and Engineer. Tenant shall select an architect ("Architect") and an engineer ("Engineer") familiar with all laws, regulations and building codes applicable to Tower II ("Applicable Law"). The Architect and the Engineer shall be selected by Tenant subject to Landlord's consent, which consent shall not be unreasonably withheld or delayed. Tenant shall continue to submit names to Landlord until the Architect and the Engineer are finally approved by Landlord and written consent has been delivered to and received by Tenant. Landlord hereby approves Rees Architecture as the Arcxxxxct and the parties agree that no Engineer will be utilized for the Improvements.
Sample 1

Related to Selection of Architect and Engineer

  • Selection of Architect/Construction Drawings Landlord shall retain, on behalf of Tenant, FPBA Architects (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.1. Landlord shall retain, on behalf of Tenant, engineering consultants and/or design-build consultants designated by Landlord (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing and HYAC work of the Improvements and any relevant components of the Landlord Work. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications as determined by Landlord, and shall be subject to Landlord’s approval as more particularly set forth in Sections 3.2 and 3.3, below. Notwithstanding Landlord’s retention of the Architect and Engineers, Tenant shall be responsible for, and shall fully cooperate and coordinate in good faith with Landlord, the Architect and the Engineers to supply all of the necessary information within Tenant’s possession to allow the Architect and the Engineers to initially prepare and then complete, the Construction Drawings. Landlord hereby agrees (at no cost to Landlord) to cooperate, on a commercially reasonable basis, with Tenant to assist Tenant in the preparation of the Construction Drawings. Landlord’s review of the Construction Drawings applicable to the Improvements (as opposed to Landlord Work) and as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Improvement-related portions of such Construction Drawings are reviewed by Landlord, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in such portions of the Construction Drawings, and Tenant’s waiver and indemnity set forth in this Lease shall specifically apply to such portions of the Construction Drawings.

  • Architect/Engineer (A/E) means a person registered as an architect pursuant to Tex. Occ. Code Xxx., Chapter 1051, as a landscape architect pursuant to Tex. Occ. Code Xxx., Chapter 1052, a person licensed as a professional engineer pursuant to Tex. Occ. Code Xxx., Chapter 1001 and/or a firm employed by Owner or a design-build contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • The Architect ENGINEER shall prepare for the State a revised accounting of how the Project responds to LEED criteria.

  • Architect Engineer shall provide assistance to Owner through the commissioning consultant/agent for the purpose of advising and counseling Owner’s personnel in the usage, operation and maintenance of the building mechanical, electrical, and plumbing systems.

  • Independent Engineer Contractor shall cooperate with Independent Engineer in the conduct of his or her duties in relation to the Project and the Work, including the duties listed in Attachment CC. No review, approval or disapproval by Independent Engineer shall serve to reduce or limit the liability of Contractor to Owner under this Agreement.

  • Geotechnical Engineer « »« » « » « » « » « »

  • Professional Engineering and Architect’s Services Professional Engineering and Architect’s Services are not permitted to be provided under this Agreement. Texas statutes prohibit the procurement of Professional Engineering and Architect’s Services through a cooperative agreement.

  • ENGINEER The individual or entity named as such in this Agreement.

  • Drawings and Specifications 9.1 A complete list of all Drawings that form a part of the Contract Documents are to be found as an index on the Drawings themselves, and/or may be provided to Developer and/or in the Table of Contents. 9.2 Materials or Work described in words that so applied have a well-known technical or trade meaning shall be deemed to refer to recognized standards, unless noted otherwise. 9.3 Trade Name or Trade Term It is not the intention of the Contract Documents to go into detailed descriptions of any materials and/or methods commonly known to the trade under “trade name” or “trade term.” The mere mention or notation of “trade name” or “trade term” shall be considered a sufficient notice to Developer that it will be required to complete the work so named, complete, finished, and operable, with all its appurtenances, according to the best practices of the trade. 9.4 The naming of any material and/or equipment shall mean furnishing and installing of same, including all incidental and accessory items thereto and/or labor therefor, as per best practices of the trade(s) involved, unless specifically noted otherwise. 9.5 Contract Documents are complementary, and what is called for by one shall be binding as if called for by all. As such, Drawings and Specifications are intended to be fully cooperative and to agree. However, if Developer observes that Drawings and Specifications are in conflict with the Contract Documents, Developer shall promptly notify District and Architect in writing, and any necessary changes shall be made as provided in the Contract Documents. 9.6 Figured dimensions shall be followed in preference to scaled dimensions, and Developer shall make all additional measurements necessary for the work and shall be responsible for their accuracy. Before ordering any material or doing any work, each Developer shall verify all measurements at the building and shall be responsible for the correctness of same. 9.7 Should any question arise concerning the intent or meaning of the Contract Documents, including the Plans and Specifications, the question shall be submitted to the District for interpretation. If a conflict exists in the Contract Documents, these Construction Provisions shall control over the Facilities Lease, which shall control over the Site Lease, which shall control over Division 1 Documents, which shall control over Division 2 through Division 49 documents, which shall control over figured dimensions, which shall control over large-scale drawings, which shall control over small-scale drawings. In no case shall a document calling for lower quality and/or quantity of material or workmanship control. However, in the case of discrepancy or ambiguity solely between and among the Drawings and Specifications, the discrepancy or ambiguity shall be resolved in favor of the interpretation that will provide District with the functionally complete and operable Project described in the Drawings and Specifications. 9.8 Drawings and Specifications are intended to comply with all laws, ordinances, rules, and regulations of constituted authorities having jurisdiction, and where referred to in the Contract Documents, the laws, ordinances, rules, and regulations shall be considered as a part of the Contract Documents within the limits specified. 9.9 As required by Section 4-317(c), Part 1, Title 24, CCR: “Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the DSA-approved documents wherein the finished work will not comply with Title 24, California Code of Regulations, a construction change document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by DSA before proceeding with the repair work.”

  • Office of Inspector General Investigative Findings Expert Review In accordance with Senate Bill 799, Acts 2021, 87th Leg., R.S., if Texas Government Code, Section 531.102(m-1)(2) is applicable to this Contract, Contractor affirms that it possesses the necessary occupational licenses and experience.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!