Semester structure and mobility paths Sample Clauses

Semester structure and mobility paths a. The components of the degree programme are taught in semesters and locations as follows: semester 1 Foundation Period 30 ECTS Intensive Programme at a joint location for all students and assessment by student’s First Semester University. Remainder at the First Semester University semester 2 Specialisation Period 30 ECTS Second Semester University semester 3 Contextualisation Period 30 ECTS Third Semester University, with the possibility to conduct part of the programme at a humanitarian agency semester 4 Research Period 30 ECTS Coordinated by the Issuing University, with supervision of the student shared jointly by the First Semester University and the Second Semester University b. With respect to the previous table, mobility from the First Semester University to the Second Semester University is mandatory. Mobility to a Third Semester University not being the student’s First Semester University or Second Semester University is mandatory for Erasmus Mundus students. c. A specification of which Partner Institutions shall be a First Semester University, Second Semester University and/or Third Semester University and which associated partners shall be a Third Semester University, combined with a detailed elaboration of the possible combinations of First Semester University, Second Semester University and Third Semester University in terms of mobility paths, shall be as established in the "Study and Examination Regulations" attached in annex to this Consortium Agreement. d. The jointly developed online Student Handbook provides students information on the content and conditions of the semesters at the First Semester Universities, the Second Semester Universities and Third Semester Universities, as well as the content and conditions of the jointly organised fourth semester.
AutoNDA by SimpleDocs

Related to Semester structure and mobility paths

  • Manufacture and Supply As between the Parties, Otsuka shall be responsible for, shall bear all costs associated with, and shall have all decision-making authority over, all Manufacturing Activities (subject to discussion of CMC matters with Acucela through the JDC or applicable Operating Team as discussed below); provided, that Otsuka shall supply Licensed Product to Acucela or its permitted subcontractors for use in clinical trials conducted in accordance with each Development Plan and, if applicable, Commercialization Plan (i.e., Phase 3b Clinical Trials or Post-Approval Studies, if any), free of charge and in such quantities as are agreed by the JDC or the JCC (as applicable) or are otherwise required to seek or obtain Regulatory Approval. In addition, if and after Acucela exercises an Opt-In Right under Section 3.1, Otsuka shall supply promotional samples of Licensed Product to Acucela for use in its performance of Co-Promotion, in such quantities and on such terms as are determined by the JCC. The cost of promotional samples of Licensed Product, which shall be included in Commercialization Costs, shall be established by the JCC based on Otsuka’s per-unit cost to manufacture such promotional samples (but, for the avoidance of doubt, Otsuka shall have no obligation to disclose any information relating to its manufacturing costs), but in no event shall such promotional sample cost exceed * per promotional sample unless mutually agreed otherwise by the Parties. Acucela’s and its permitted subcontractors’ obligations to conduct Development activities, and upon Acucela’s exercise of its Opt-in Right pursuant to Section 3.1, to conduct Development and Commercialization activities, shall be expressly conditioned upon Otsuka fulfilling its Licensed Product supply obligations as set forth in the Development Plan or the Commercialization Plan, as applicable. To the extent that Otsuka reasonably believes is necessary for performance of Development or Commercialization, Otsuka agrees to keep Acucela reasonably informed from time to time, through the JDC, JCC or applicable Operating Team, regarding the general status of Manufacturing Activities related to the Licensed Product (including Other Indication Product(s), as applicable) and from time to time shall update Acucela on any foreseeable delays and/or other material issues relating to Manufacturing the Licensed Product (including Other Indication Product(s), as applicable). Through the JDC or applicable Operating Team, Otsuka and Acucela shall confer and discuss CMC matters, and Otsuka agrees to consider suggestions of Acucela regarding CMC matters.

  • Capital Structure and Business If all or part of a Credit Party's Stock is pledged to Agent, that Credit Party shall not issue additional Stock. No Credit Party shall amend its charter or bylaws in a manner that would adversely affect Agent or Lenders or such Credit Party's duty or ability to repay the Obligations. No Credit Party shall engage in any business other than the businesses currently engaged in by it or businesses reasonably related thereto.

  • LICENSURE AND CERTIFICATION 25.1 The Employer will continue its current practices related to licensure and certification or comply with 25.2, 25.3 and 25.4, below, whichever provides the greater benefit to the employee.

  • BUSINESS STRUCTURE AND ASSIGNMENTS 5.17.1 Contractor shall not assign this Agreement at law or otherwise or dispose of all or substantially all of its assets without the Director’s prior written consent. Nothing in this clause, however, prevents the assignment of accounts receivable or the creation of a security interest under Section 9.406 of the Texas Business & Commerce Code. In the case of such an assignment, Contractor shall immediately furnish the Director and CPO with proof of the assignment and the name, telephone number, and address of the Assignee and a clear identification of the fees to be paid to the Assignee. 5.17.2 Contractor shall not delegate any portion of its performance under this Agreement without the Director’s prior written consent.

  • Fire and Casualty Insurance Developer shall obtain and keep in full force adequate fire and casualty insurance with coverage in an amount equal to the assessed value of such improvements. In the event of loss the Developer shall use the proceeds of such insurance to promptly reconstruct the damaged or lost improvements.

  • Capital Structure and Contributions Section 5.1 Capital Structure 16 Section 5.2 Capital Contributions 16 Section 5.3 Capital Accounts 16 Section 5.4 Additional Financing 16

  • Fire and Casualty (a) If the Premises are damaged by fire or other casualty then in such event Landlord shall, in its sole discretion, either (i) enter and make the necessary repairs without affecting this Lease, or (ii) terminate this Lease by giving written notice thereof to Tenant within sixty (60) days of such fire or other casualty in which event Tenant shall pay the rent hereunder apportioned to the time of such damage and shall pay all other obligations of Tenant owing on the date of termination, and Tenant shall immediately surrender the Premises to Landlord. (b) In the event the Building is so badly damaged or injured by fire or other casualty, even though the Premises may not be affected, that Landlord decides, within ninety (90) days after such destruction, not to rebuild or repair the Building (such decision being vested exclusively in the discretion of Landlord), then in such event Landlord shall so notify Tenant in writing and this Lease shall terminate as of the date of damage in the notice from Landlord to Tenant, and the Tenant shall pay rent hereunder apportioned to the date of damage and shall pay all other obligations of Tenant owing on the date of damage, and Tenant shall immediately surrender the Premises to Landlord. (c) In the event the Lease is not terminated, Landlord shall commence and proceed with reasonable diligence to repair and restore the Building and/or the Premises to substantially the same condition as existed immediately prior to the date of damage. All rent shall xxxxx for the portion of the Premises that is not usable by Tenant from the date of damage until substantial completion of the repairs and restoration required to be made by Landlord pursuant to this Paragraph. [****] = CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS, HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 406 OF THE SECURITIES ACT OF 1933, AS AMENDED.

  • Disclosure and Use 20.2.1 Each Receiving Party agrees that, from and after the Effective Date: (a) all such Proprietary Information communicated or discovered, whether before, on or after the Effective Date, in connection with this Agreement shall be held in confidence to the same extent as such Receiving Party holds its own confidential information; provided, that such Receiving Party shall not use less than a reasonable standard of care in maintaining the confidentiality of such information; (b) it will not, and it will not permit any of its employees, contractors, consultants, agents or affiliates to disclose such Proprietary Information to any other third person; (c) it will disclose Proprietary Information only to those of its employees, contractors, consultants, agents and affiliates who have a need for it in connection with the use or provision of services required to fulfill this Agreement; (d) it will, and will cause each of its employees, contractors, consultants, agents and affiliates to use such Proprietary Information only to effectuate the terms and conditions of this Agreement and for no other purpose; (e) it will cause each of its affiliates to execute individual confidentiality agreements containing the same restrictions as this Article XX; and (f) it will, and will cause each of its employees, contractors, consultants, agents and affiliates, to use such Proprietary Information to create only that Derivative Information necessary for such Receiving Party's compliance with Applicable Law or its performance under the terms of this Agreement. 20.2.2 Any Receiving Party so disclosing Proprietary Information to its employees, contractors, consultants, agents or affiliates shall be responsible for any breach of this Agreement by any of its employees, contractors, consultants, agents or affiliates and such Receiving Party agrees to use its reasonable efforts to restrain its employees, contractors, consultants, agents or affiliates from any prohibited or unauthorized disclosure or use of the Proprietary Information and to assist the Disclosing Party in its efforts to protect such information from disclosure. Each Receiving Party making such disclosure shall notify the Disclosing Party as soon as possible if it has knowledge of a breach of this Agreement in any material respect. 20.2.3 Proprietary Information shall not be reproduced by any Receiving Party in any form except to the extent (i) necessary to comply with the provisions of Section 20.3 and (ii) reasonably necessary to perform its obligations under this Agreement. All such reproductions shall bear the same copyright and proprietary rights notices as are contained in or on the original.

  • NATURE AND SCOPE 4.1 This Agreement is an agreement under the terms and conditions of which the Supplier/Service Provider will arrange for the supply/provision to Transnet of the Goods/Services which meet the requirements and specifications of Transnet, the delivery of which is controlled by means of Purchase Orders to be issued by Transnet and executed by the Supplier/Service Provider in accordance with this Agreement. 4.2 Such Purchase Orders and deliveries to Transnet shall be agreed between the Parties from time to time, subject to the terms of the Schedule of Requirements/Work Order. 4.3 Each properly executed Purchase Order forms an inseparable part of this Agreement as if it were fully incorporated into the body of this Agreement. 4.4 During the period of this Agreement, both Parties can make written suggestions for amendments to the Schedule of Requirements/Work Orders in accordance with procedures set out in clause 35 [Amendment and Change Control]. A Party will advise the other Party within 14 [fourteen] Business Days, or such other period as mutually agreed, whether the amendment is acceptable. 4.5 Insofar as any term, provision or condition in the Schedule of Requirements/Work Order conflicts with a like term, provision or condition in this Agreement and/or a Purchase Order, the term or provision or condition in this Master Agreement shall prevail, unless such term or provision or condition in this Master Agreement has been specifically revoked or amended by mutual written agreement between the Parties. 4.6 Time will be of the essence and the Supplier/Service Provider will perform its obligations under this Agreement in accordance with the timeframe(s) [if any] set out in the relevant schedule, save that the Supplier/Service Provider will not be liable under this clause if it is unable to meet such obligation within the time required as a direct result of any act or omission by Transnet and it has used its best endeavours to advise Transnet of such act or omission. In the event of such delay, any time deadlines detailed in the relevant schedule shall be extended by a period equal to the period of that delay.

  • TIPS Sales and Supplemental Agreements If awarded, when making a sale under this awarded contract, the terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, defects, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, AIA Contract, Invoice, etc.) (“Supplemental Agreement” as used herein) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement. The Supplemental Agreement shall dictate the scope of services, the project delivery expectations, the scheduling of projects and milestones, the support requirements, and all other terms applicable to the specific sale(s) between the Vendor and the TIPS Member.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!