Service Ordering Procedure Sample Clauses

Service Ordering Procedure. (a) Orders Pac-West shall be the single point of contact through which Customer may order services under this Agreement for itself and its affiliates from the Pac-West family of companies set forth in the recitals to this Agreement. Customer has no obligation but may at its option purchase additional Ports under the terms and conditions of this Agreement. The parties agree to follow the procedures for any additional Port orders in accordance with that which is defined in this Section 10.
Sample 1
AutoNDA by SimpleDocs
Service Ordering Procedure. A. Distributor agrees to comply with service ordering procedures contained in Exhibit C. All orders for Services shall be further subject to approval and acceptance by ICG in its sole discretion. ICG reserves the right to modify the service ordering intervals and any other section of Exhibit C upon written notice. ICG reserves the right to reject any Service order in its sole discretion. B. ICG will use its best efforts to install and maintain the Services sold by Distributor pursuant to this Agreement, but shall have no responsibility for, or liability in connection with, any non-ICG services or products sold by Distributor. C. ICG shall have the right to independently verify all orders submitted by Distributor and shall have the right to reject any orders which cannot be verified as accurate or complete. No commissions may be earned or will be paid on rejected orders. D. ICG reserves the right to verify through an independent third party or other verification methods, or require Distributor to verify, all orders submitted. The costs of verification by a third party or other verification methods shall be paid for in a manner agreed upon by the parties. E. ICG may from time to time, in its discretion, submit leads of potential customers to Distributor. The submission of any lead is not, and shall not, be deemed to be ICG's approval of the lead as a customer, and Distributor shall be responsible for ensuring that the lead is a proper business customer prior to submitting any order, though Distributor shall be under no obligation to solicit the leads submitted by ICG. ICG may, as set forth in this Agreement, refuse any offer for service submitted by Distributor from leads referred to Distributor by ICG.
Sample 1

Related to Service Ordering Procedure

  • ORDERING PROCEDURE Orders placed against this contract may be in the form of an agency issued purchase order on an as-required basis. Or an agency may also use the Arkansas State Purchasing Card (P- Card) to purchase furniture.

  • Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information. 6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at xxxx://xxx.xxxxx.xxx/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms. 6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile. 6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services. 6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing xxxx to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will xxxx the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer. 6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request. 6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement. 6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.

  • ORDERING PROCEDURES All task orders under OASIS SB must: 1. Be awarded by an OCO with a Delegation of Procurement Authority (DPA) or by a Contractor authorized to use the OASIS SB Contracts as a Government Source of Supply 2. Be within the scope of Section C and all other terms and conditions of the OASIS SBcontract 3. Be solicited and awarded under the proper NAICS Code and corresponding OASIS SB MA-IDIQ Contract Number (See Section H.4.) 4. Identify the proper Product Service Code (See Section H.5.) and, 5. Comply with the OASIS SB Contract, OASIS SB DPA Training, OASIS SB Ordering Guide, the Ordering Procedures in FAR Subpart 16.505, Ordering, and other applicable agency specific regulatorysupplements

  • Bumping Procedure In the application of this Article, permanent part-time employees cannot displace permanent full-time employees or vice versa provided that permanent full-time employees who have exhausted their bumping rights hereunder and are to be laid off from work shall have the right to displace a permanent part-time employee with lesser GO seniority, within their section. Such bumping within the section may only be in a downward or lateral direction provided they are qualified, willing and able to do the work (refer to Schedule “E-I” and “E-I OFPT”). Downward shall be defined as lesser pay per hour and/or lesser hours per week (permanent full-time vs. permanent part-time). Lateral shall be defined as same pay per hour. In the application of this Article, permanent part-time employees cannot displace permanent full-time employees or vice versa provided that permanent full-time employees who have exhausted their bumping rights hereunder and are to be laid off from work, shall have the right to displace any permanent part-time employee with lesser GO Transit seniority, within their section provided they are able, willing and qualified. Due to the nature of the bumping procedure and the unpredictability of the direction and results of that bumping, the layoff must take precedent over all other normal movement of employees (i.e., standing applications). During layoffs an employee may choose to accept an open position for which he/she is qualified rather than bumping within their classification or section and should he/she elect this option, they shall retain recall rights to the original classification without loss of seniority. Where an OFPT employee who has been notified or is on layoff and currently possesses the qualifications and skills of a position they have held previously, then the employee may bump laterally or downward within their section or another section where the previously held position is identified. At the time of layoff the employee must satisfy the criteria identified in the current job description, and the employee must have satisfied the performance standards of that classification. Should the parties agree that the bumping procedure will likely cause significant movement within a classification or section, then the parties may agree to have a “master” sign-up take place which will be the sole responsibility of the Union to administer.

  • BILLING PROCEDURE a. The Contractor shall submit, not more than semi-monthly, properly completed A-19 vouchers (the "voucher") to one of the following: The Department of Children, Youth, and Families Attn: Xxxxx Xxxx PO Box 40972 Olympia WA 98504-0972 Or, email a scan of an original, signed A-19 voucher directly to the DCYF Contract Manager at Xxxxx.xxxx@xxxx.xx.xxx b. Payment to the Contractor for approved and completed work shall be made by warrant or Electronic Funds Transfer by DCYF and considered timely if made within 30 days of receipt of a properly completed voucher. Payment shall be sent to the address designated by the Contractor and set forth in this Contract. c. Each voucher must clearly reference the DCYF Contract Number and the Contractor's Statewide Payee Registration number assigned by the Office of Financial Management (OFM). d. Properly completed vouchers and attachments completed by the Contractor must contain the information described in Exhibit A under the Section titled "Compensation and Voucher Payment".

  • HIRING PROCEDURE 5.1 At the Pre-job Conference the Employer may request and the Local Union shall clear: 5.1.1 Up to ten percent (10%) of the Principal Operators excluding mechanics, required for the job from other Locals of the Union and each such Principal Operator shall be entitled to perform only the work for which he is cleared. Up to one- half (½) of those Principal Operators cleared under this provision may commence employment at the start of the Right-of-Way operations and the balance of those Principal Operators cleared under this provision may commence employment not prior to the start of the Pipe Gang operations. 5.1.2 Up to fifty percent (50%) of the mechanics, utility welders and lubrication and service unit operators required for the job who are members of another Local of the Union. This ratio shall be maintained on a "one-to-one" basis for the duration of the job. The first employee shall be a member of the Local Union having geographic jurisdiction for the job. 5.1.3 The Employer shall have the right to name request by classification up to fifty percent (50%) of the required employees who are members of the Local Union. Those employees hired under the provisions of Article 5.1.1 and 5.1.2 above shall be included in the fifty percent (50%). This ratio shall be maintained on a one-to-one basis for the duration of the job. Thereafter the Employer shall notify the Local Union of all his employee requirements and shall only hire those who have been cleared for work by the Local Union having jurisdiction. 5.2 The Local Union shall be given forty-eight (48) hours exclusive of Saturdays, Sundays, and holidays to supply the required employees but shall advise the Employer of expected delays in dispatching any employees within forty- eight (48) hours. Employees shall be entitled to Waiting Time or Reporting Time upon arrival at the jobsite on the day designated by the Employer for arrival, if no work is provided. 5.3 All employees shall be in possession of a referral slip from the Local Union for identification purposes unless the Local Union otherwise clears an employee for hire by telegram, telex, facsimile transmission or other means of written communication. All out-of-province employees must provide the Local Union having jurisdiction with a copy of a duly authorized Travel Card issued by his/her home Local prior to being issued a referral slip and cleared to work. 5.4 Subject to the terms and conditions of this Agreement, the Employer shall have the right to refuse any referral provided the cause for such refusal is stated and shall not be unreasonable. 5.5 If the Local Union is unable to supply the required employees in accordance with Article 5.2, the Employer may obtain employees elsewhere, subject to the provisions of Article 3.3. 5.6 In the event the Local Union is unable to supply the required qualified employees, the Employer will provide every opportunity to any employee who has successfully completed a pipeline Operating Engineers training course, and is approved by a joint training committee, and the employee will be admitted to membership in the Local Union in accordance with Article

  • Posting Procedure 1. Notice of all bargaining unit vacancies and newly created bargaining unit positions shall be posted at the administrative designated sites in each school building as well as on the District website. A copy of each posting will be forwarded to the President of OAPSE Local 617 for informational purposes. 2. Such vacancies shall be posted for five (5) work days after the date of posting. 3. Employees shall apply for all job postings online.

  • Hearing Procedure A. The Personnel Commission may conduct hearings of appeals or may appoint a hearing officer to conduct the hearing and report findings and recommendations to the Commission. If the Personnel Commission orders a hearing, said hearing shall be held in closed session. The employee shall be given written notice of his or her right to have the complaints or charges heard in an open session rather than closed session pursuant to Government Code section 54957. The notice shall be delivered to the employee personally or by mail at least twenty-four (24) hours before the time for holding the closed session. B. Hearings shall be conducted in the manner most conducive to determination of the truth, and neither the Commission nor its hearing officer shall be bound by technical rules of evidence. Decisions made by the Commission shall not be invalidated by any informality in the proceedings. C. The Personnel Commission or its hearing officer shall determine the relevancy, weight, and credibility of testimony and evidence. It shall base its findings on the preponderance of evidence. D. Each side will be permitted an opening statement (Board first) and closing arguments (employee first). The Board shall first present its witnesses and evidence to sustain its charges and the employee will then present his witnesses and evidence in defense. E. Each side will be allowed to examine and cross-examine witnesses. F. Both the Board and the employee will be allowed to be represented by legal counsel or other designated representation. The employee may, at his/her option, be represented by legal counsel and/or union representation, or any other person designated by the employee. If the employee files an appeal, the employee shall be required to attend the Commission Appeal Hearing, even if the employee’s designated representative appears on his/her behalf. If the employee fails to appear, the employee will be deemed to have forfeited his/her rights to further appeal and the Personnel Commission shall allow the Board of Trustee’s disciplinary action to stand. G. The Commission may, and shall, if requested by the Board or the employee, subpoena witnesses and/or require the production of records or other material evidence. H. The Commission may, prior to or during a hearing, grant a continuance for any reason it believes to be important to its reaching a fair and proper decision. I. Whether the hearing is held in a public or Executive Session, the Commission, after it concludes the hearing, may deliberate its decision in Executive Session. No persons other than members of the Commission, its counsel, and the Director of Personnel shall be permitted to participate in the deliberations. If the Personnel Director or any staff was a witness in the proceedings, he shall also be barred from the Commission's final deliberations. J. The Commission shall render its judgment in an open session as soon after the conclusion of the hearing as possible and in no event later than fourteen (14) days. Its decision shall set forth which charges, if any, are sustained and the reasons therefore. K. The Commission may sustain or reject any or all of the charges filed against the employee. It may sustain, reject, or modify the disciplinary action invoked against the employee. It may not provide for discipline more stringent than that invoked by the Board. L. The Commission order of judgment will be filed with the Governing Board and the charged employee and shall set forth its findings and decision. If a dismissal is not sustained, its order shall set forth the effective date the employee is to be reinstated which may be any time on or after the date of disciplinary action.

  • Service Orders Service Order shall state the Customer’s minimum committed term of the Services arising thereunder from the date that such Services are made available to the Customer (“Initial Term”); if the Initial Term is not expressly stated in the Service Order, the Initial Term of the Services shall be deemed to be for a twelve (12) month term from the date that the Services are made available to the Customer. Unless a Party notifies the other Party of its intention not to renew the Services at least sixty (60) days prior the end of the Initial Term or then current term (“Term”), the Services shall automatically renew for subsequent twelve (12) month terms under the same terms and conditions except that the Fees may be adjusted to reflect Aptum’s then current pricing for such Services. Cancellation of any Service Order or a particular Service thereunder must be made by way of a cancellation request in writing or through a service ticket in accordance with the applicable Product Terms.

  • Hiring Procedures Nothing contained in this Article 4 shall impair any of the rights of the Employer to hire new or additional employees to meet the employment needs of the Employer, in accordance with the terms and provisions of this collective bargaining Agreement or to meet the obligations of the Employer under Article 2, Section H of this Agreement or to take affirmative steps to comply with any requirements under any applicable Federal or State law prohibiting discrimination in employment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!