Testing Assumptions Sample Clauses

Testing Assumptions. Patheon will fully test all raw materials to USP standards, as appropriate.
Sample 1Sample 2Sample 3
Testing Assumptions. Testing for raw materials and packaging components are based on information to date at the site.
Sample 1
Testing Assumptions. Workday will provide standard test scenarios to be used as a foundation; however, Customer team will develop detailed test scenarios based on Customer’s user requirements and system configuration. Customer will lead testing and sign off on the final configuration prior to the move to Production. Workday will support issue resolution to Customer’s testing efforts. • Workday will provide guidance and assistance to Customer’s Test Manager and test team during test execution of each of the test cycles. • Workday will assist Customer to prioritize the severity of the defects and timely assign them for resolution.
Sample 1
Testing Assumptions. Testing for raw materials, packaging components and finished product are based on the specifications and methods available and Patheon’s experience to-date at both sites.
Sample 1
Testing Assumptions. Testing for coating materials and finished product (including microbiology) are based on the given specifications and methods established at the site.
Sample 1
Testing Assumptions. 1. Testing for raw materials, packaging components and finished product are based on the specifications and methods completed to-date at the site. Testing is based on standard USP. 2. Release testing includes appearance, ID, assay, related substances, dissolution, water content, uniformity of dosage units and residual solvents. 3. Testing cost may be subject to change based on final specifications and agreement between the two parties.
Sample 1
Testing Assumptions. Raw material and finished product testing are based on available specifications and Patheon’s best estimates.
Sample 1
Testing Assumptions. Testing for raw materials, packaging components and finished product are based on information provided by Salix and Patheon’s best estimates.
Sample 1
Testing Assumptions. Customer is responsible for assigning a Test Manager to drive and oversee the Testing stage. • Workday will provide standard test scenarios to be used as a foundation; however, Customer team will develop detailed test scenarios based on Customer’s user requirements and system configuration. • Customer will lead testing and sign off on the final configuration prior to the move to Production. Workday will support issue resolution to Customer’s testing efforts. • Customer Test Manager will create a testing strategy document to support the testing cycles, including roles and responsibilities, testing schedule and process for managing test execution and issue resolution. • Workday will provide guidance and assistance to Customer's Test Manager and test team during test execution of each of the test cycles. • Workday will assist Customer to prioritize the severity of the defects and to timely assign them help for resolution. • Customer to enlist SMEs from workstreams that are already 'live' to regression test/validate the revised configuration on Phase X deployments.
Sample 1

Related to Testing Assumptions

  • Loan Assumption Provided no Event of Default is then continuing, Mortgage Borrower shall have the one time right to sell, assign, convey or transfer (but not mortgage, hypothecate or otherwise encumber or grant a security interest in) legal or equitable title to all (but not fewer than all) of the Properties only if after giving effect to the proposed transaction (i) the Properties will be owned by one or more Single Purpose Entities wholly owned by a Permitted Transferee or a Pre-approved Transferee which shall have executed and delivered to Mezzanine Lender an assumption agreement in form and substance acceptable to Mezzanine Lender. Any such assumption of the Loan shall be conditioned upon, among other things, (i) the delivery of financial information, including, without limitation, audited financial statements, for such purchaser and the direct and indirect owners such purchaser, (ii) the delivery of evidence that the purchaser is a Single Purpose Entity and is not a Disqualified Transferee, (iii) the execution and delivery of all documentation reasonably requested by Mezzanine Lender, (iv) the delivery of Opinions of Counsel requested by Mezzanine Lender, including, without limitation, a Non-Consolidation Opinion with respect to the purchaser and other entities identified by Mezzanine Lender or requested by the Rating Agencies and opinions with respect to the valid formation, due authority and good standing of the purchaser and any additional pledgors and the continued enforceability of the Loan Documents (Mezzanine) and any other matters requested by Mezzanine Lender, (v) the delivery of a mezzanine endorsement to the Title Policy in form and substance acceptable to Mezzanine Lender, insuring the lien of the Security Instrument, as assumed, subject only to the Permitted Encumbrances and (vi) the payment of all of Mezzanine Lender’s reasonable out-of-pocket fees, costs and expenses, including, without limitation, reasonable attorneys’ fees and costs, actually incurred by Mezzanine Lender in connection with such assumption.

  • Payoffs and Assumptions The Seller shall provide to the Purchaser, or its designee, copies of all assumption and payoff statements generated by the Seller on the related Mortgage Loans from the related Cut-off Date to the related Transfer Date.

  • Acceptance and Assumption Assignee hereby accepts the foregoing assignment and further hereby assumes and agrees to perform, from and after January 1, 2002, all duties, obligations and responsibilities of the property manager arising under the Agreement.

  • Definitions and Assumptions For purposes of this Agreement: (i) the terms “excess parachute payment” and “parachute payments” shall have the meanings assigned to them in Section 280G of the Code, and such “parachute payments” shall be valued as provided therein; (ii) present value shall be calculated in accordance with Section 280G(d)(4) of the Code; (iii) the term “Base Period Income” means an amount equal to Executive’s “annualized includible compensation for the base period” as defined in Section 280G(d)(1) of the Code; (iv) “Agreement Benefits” shall mean the payments and benefits to be paid or provided pursuant to this Agreement; (v) for purposes of the opinion of the National Advisor, the value of any noncash benefits or any deferred payment or benefit shall be determined by the Company’s independent auditors in accordance with the principles of Sections 280G(d)(3) and (4) of the Code, which determination shall be evidenced in a certificate of such auditors addressed to the Company and Executive; and (vi) Executive shall be deemed to pay federal income tax and employment taxes at the highest marginal rate of federal income and employment taxation, and state and local income taxes at the highest marginal rate of taxation in the state or locality of Executive’s domicile (determined in both cases in the calendar year in which the Date of Termination occurs or the notice described in Section 4.5(b) above is given, whichever is earlier), net of the maximum reduction in federal income taxes that may be obtained from the deduction of such state and local taxes.

  • Testing and Acceptance Within […***…] after RFM’s delivery of the IC Design File to ST, ST shall manufacture and deliver a commercially reasonable quantity of evaluation Product to RFM for evaluation testing. Upon RFM’s receipt of such Products from ST, RFM shall test such Products with the applicable Evaluation Software and in the applicable Evaluation Circuit Design to determine if the IC Design for such Products conforms to the applicable Specifications. Upon completion of such testing, RFM shall provide ST with the data from such testing (“Evaluation Data”). Upon ST’s receipt of the Evaluation Data, ST shall evaluate whether the Evaluation Data indicates that the IC Design conforms to the Specifications in all material respects. ST shall accept or reject the IC Design based on the Evaluation Data and shall give RFM written notice thereof within seven (7) calendar days after RFM’s delivery of the Evaluation Data to ST. An IC Design will be deemed accepted by ST if RFM has not received notification of rejection of such IC Design from ST within seven (7) calendar days after RFM’s delivery of the applicable Evaluation Data to ST. ST’s refusal to accept the IC Design must be reasonable, must be in writing and must be accompanied by a reasonably detailed description of the manner in which the IC Design fails to comply with the Specifications in all material respects (collectively, the “Deficiencies”) so that RFM can have the opportunity to correct the Deficiencies. If ST properly rejects the IC Design, RFM shall use commercially reasonable efforts to correct any Deficiencies and redeliver a corrected IC Design File within […***…] after RFM’s receipt of the rejection notice and the foregoing provisions set forth in this Section 3.3 shall be reapplied until the IC Design is accepted; provided, however, that upon the […***…] or any subsequent rejection, either party may terminate this Agreement upon thirty (30) calendar days prior written notice to the other party, unless the IC Design is accepted during such notice period.

  • Assignment; Assumption by Successor The rights of the Company under this Agreement may, without the consent of Executive, be assigned by the Company, in its sole and unfettered discretion, to any person, firm, corporation or other business entity which at any time, whether by purchase, merger or otherwise, directly or indirectly, acquires all or substantially all of the assets or business of the Company. The Company will require any successor (whether direct or indirect, by purchase, merger or otherwise) to all or substantially all of the business or assets of the Company expressly to assume and to agree to perform this Agreement in the same manner and to the same extent that the Company would be required to perform it if no such succession had taken place; provided, however, that no such assumption shall relieve the Company of its obligations hereunder. As used in this Agreement, the “Company” shall mean the Company as hereinbefore defined and any successor to its business and/or assets as aforesaid which assumes and agrees to perform this Agreement by operation of law or otherwise.

  • Assumption of Assumed Liabilities (a) Except as expressly provided in Section 2.4(b), the Purchaser shall not assume, in connection with the transactions contemplated hereby, any liability or obligation of either Seller whatsoever, whether known, unknown, absolute, contingent or otherwise, and whether accrued or unaccrued. (b) Subject to the foregoing Section 2.4(a), effective as of the Closing Date, the Purchaser shall assume the following liabilities and obligations of the Sellers arising out of the use, ownership or operation of the Business, the Facilities or the other Assets (collectively, the “Assumed Liabilities”): (i) the obligations of the Sellers under (x) each Assumed Contract, related to the rights under each Assumed Contract assigned to the Purchaser under the Assignment and Assumption Agreement, (y) each JWWTP Agreement to the extent assigned to the Purchaser under the Assignment (JWWTP Agreements) and (z) each License included in the Assets required to be performed on or after the Closing Date; (ii) all accounts payable, accrued expenses and other current liabilities of the Sellers related to the Business and accrued or existing as of the Closing Date, but only to the extent included in the determination of Final Net Working Capital; (iii) all liabilities and obligations, known or unknown, relating to, resulting from, arising out of or in connection with, directly or indirectly, (A) events that occur, (B) services performed or products manufactured or sold, or (C) the ownership, operation or use of the Business and the Assets, in each case, from and after the Closing; (iv) liabilities and obligations relating to or arising from physical or bodily injuries to, or damage to the property of, third parties that occur from and after the Closing to the extent caused by the physical condition of the Assets (which are being transferred as-is, where-is); (v) liabilities arising in connection with any severance plan established by the Purchaser on or after the Closing Date; and (vi) liabilities under any of the CBAs or any other collective bargaining agreement or other labor arrangement, including any grievances, to the extent arising from any act or omission after the Closing.

  • No Assumption No approvals or acceptances by, or on behalf of, TFC shall be deemed to be an assumption of any responsibility by TFC for any defect, error or omission in said Deliverables or Professional Services.

  • No Consent to Assumption Each Holder of a Security, by acceptance thereof, shall be deemed expressly to have withheld any consent to the assumption under Section 365 of the Bankruptcy Code or otherwise, of the Purchase Contract by the Company or its trustee, receiver, liquidator or a person or entity performing similar functions in the event that the Company becomes the debtor under the Bankruptcy Code or subject to other similar state or Federal law providing for reorganization or liquidation.

  • Non-Assumption of Liabilities Buyer does not assume and shall not be responsible for any liabilities, indebtedness or obligations of the Selling Parties or the Business other than the Assumed Obligations (as defined herein). Without limiting the generality of the foregoing sentence, the Parties hereby agree that except as expressly set forth in Section 7.2 hereof, Buyer shall not, by the execution and performance of this Agreement or otherwise, assume, become responsible for or incur any liability or obligation of any nature of either Seller or Shareholder whether legal or equitable, matured or contingent, known or unknown, foreseen or unforeseen, ordinary or extraordinary, patent or latent, whether arising out of occurrences prior to, at or after the date of this Agreement, including, without limiting the generality of the foregoing, any liability or obligation of Seller or Shareholder arising out of or relating to: (a) any occurrence or circumstance (whether known or unknown) which occurs or exists on or prior to the Closing Date and which constitutes, or which by the lapse of time or giving notice (or both) would constitute, a breach or default under any lease, contract, or other instrument or agreement (whether written or oral); (b) any injury to or death of any person or damage to or destruction of any property, whether based on negligence, breach of warranty, or any other theory; (c) a violation of any Applicable Laws or the requirements imposed by any governmental authority or of the rights of any third person, including, without limitation, any requirements relating to the reporting and payment of federal, state, local or other income, sales, use, franchise, excise or property tax liabilities of Seller other than ad valorem property taxes and similar taxes prorated on closing statement; (d) the generation, collection, transportation, storage or disposal by Seller of any materials, including, without limitation, Hazardous Materials, prior to the Closing Date; (e) an agreement or arrangement between Seller and its employees or any labor or collective bargaining unit representing any such employees; (f) the severance pay obligation of Seller or any employee benefit plan (within the meaning of Section 3(3) of the Employee Retirement Income Security Act of 1974, as amended) or any other fringe benefit program maintained or sponsored by Seller or to which Seller contributes, or any contributions, benefits or liabilities therefor, or any liability for the withdrawal or partial withdrawal from or by reason of the termination of any such plan or program by Seller; (g) indebtedness and all other obligations and liabilities of Seller to any bank or other lender, except to the extent any such obligations or liability is an Assumed Liability; (h) Seller and unrelated to Buyer initiated at any time, whether or not listed on Schedule 4.1(h) (and to the extent any liability or obligation arises out of or relates to both Seller and Buyer, each party's liability shall be proportionately allocated between the parties); (i) any liability, obligation, cost or expense related to the Excluded Assets; (j) any liability, obligation cost or expense related to the Operations Property, including, without limitation, the environmental condition thereof; (k) the liabilities or obligations of Seller for brokerage or other commissions relative to this Agreement or the transactions contemplated hereunder; (l) any liability or obligation of Seller for taxes of any kind, related to periods before the Closing Date, or whether incurred by Seller in connection with this Agreement, the Business or the transactions contemplated hereby, except any taxes incurred in connection with the operation of the Business by Buyer or otherwise attributable to a period of time after the Closing; (m) any liability or obligation to pay for any products, goods, raw materials or services delivered or provided to Seller in respect of the Business or otherwise, except to the extent such liability or obligation is an Assumed Liability; (n) any liability or obligation of Seller under any guarantee or any agreement to provide indemnification to any other person or entity unless as a part of an assumed contract; (o) any liability or obligation arising from the acts or omissions of Seller except to the extent that any such liability or obligation is an Assumed Obligation; (p) all trade payables and accruals of the Seller in respect of the Business or otherwise; (q) that certain Disposal Agreement by and between Waste Reduction of South Carolina, Inc. and Laurens County Landfill, LLC dated October 5, 2001; and (r) that certain Disposal Agreement by and between Waste Reduction of South Carolina, Inc. and R&B Landfill, Inc. dated August 1, 1998, as amended by that certain First Amendment to Disposal Agreement dated June 29, 2000 ((a) through (r) being referred to collectively as the "Retained Liabilities"). The Seller shall retain all of the Retained Liabilities. The assumption of the Assumed Liabilities by Buyer hereunder shall not in any respect enlarge any rights of third parties under contracts or arrangements with Buyer or Seller and nothing herein shall prevent any party from contesting in good faith any of the Assumed Liabilities with any third party. Seller agrees to indemnify Buyer and its successors and assigns from and against any liabilities or obligations related to any Retained Liabilities in accordance with Section 8.1 hereof.