TOWER BOLTS Sample Clauses

TOWER BOLTS. 21.1 Aluminium anodized tower bolts shall comply with IS-204 (Part-II) specification for tower bolts, Part-II non-ferrous metals. The shape and size of tower bolt shall be as indicated. The type and size of tower bolt shall be as specified in respective item. 21.2 Barrel and tower bolts, wherever possible shall have the knob integral with bolts. In case it is not possible to provide a single piece construction of bolt, the knob may preferable be fitted to the bolts with a pin or alternatively screwed and riveted to the bolts, and its shape may be round as directed. Where diameter of bolt of particular size of tower bolt is not stated in the IS, the bolt shall be of 10mm dia upto size 125mm and 12mm dia for sizes 150mm and above.
Sample 1
AutoNDA by SimpleDocs
TOWER BOLTS. 9.2.1 Brass and aluminium tower bolts shall comply with IS 204 (Part 2)-1992 Specification for tower boltsPart 2, non-ferrous metals. The type and size of the tower bolts shall be as indicated. The bolts shall be brightfinished, stain finished, Ni-Cr plated as per IS 1068, copper oxidized as per IS 1376 or zinc plated as per IS 1573, as indicated. 9.2.2 Where diameter of bolt for particular size of tower bolts is stated in the IS as 10 or 12 mm, the boltshall be of 10 mm dia upto size 125 mm and 12 mm dia for sizes 150mm and above.
Sample 1
TOWER BOLTS. Tower bolts shall be of Aluminium anodized (extruded section) conforming to specifications given in clauses 9.3.1 and 9.3.3 of MES Schedule.
Sample 1
TOWER BOLTS. Steel tower bolts shall comply with IS-204 (Part 1). Brass and aluminium (Non Ferrous) tower bolts shall comply with IS-204 (Part 2). The type and size of the tower bolts shall be as mentioned in Schedule “A” List of items of work. The bolts shall be bright finished, stain finished, Ni-Cd plated as per IS-1068, copper oxidized as per IS-1376 or zinc plated as per IS-1573, as indicated. Barrel and skeleton tower bolts, wherever possible, shall have the knob integral with bolts. Diameter of bolt shall be of 10 mm for tower bolt of size up to 125 mm and it will be 12 mm for the tower bolt of sizes 150 mm and above.
Sample 1
TOWER BOLTS. 10.13.3.1. These shall generally conform to IS 204 (Part. I) & IS 204 (Part. II). Tower bolts shall be well made and shall be free from defects. The bolts shall be finished to the correct shape and shall have a smooth action. All tower bolts made with sheet of
Sample 1
TOWER BOLTS. Refer para 9.3 of MES schedule Part-I as applicable.
Sample 1

Related to TOWER BOLTS

  • Moonlighting Employment as a physician in a professional capacity outside of what is outlined in this Agreement, whether temporary special medical activity (“TSMA”) or external moonlighting, must be approved in writing, in advance, by the Departmental Chair, Program Director and Director of Graduate Medical Education (or designee). Even if approved, professional and general liability insurance as outlined in Section 5.4 is not provided to Trainee engaged in external moonlighting. Trainee acknowledges he or she has the responsibility to obtain insurance for such engagement. TSMA and external moonlighting must be included and reported as part of Trainee's hours spent on clinical experience and education. Trainee shall not be required to engage in any outside work.

  • Personnel, Office Space, and Facilities of Manager The Manager at its own expense shall furnish or provide and pay the cost of such office space, office equipment, office personnel, and office services as the Manager requires in the performance of its investment advisory and other obligations under this Agreement.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • ADJACENT EXCAVATION-SHORING If an excavation shall be made upon land adjacent to the demised premises, or shall be authorized to be made, Tenant shall afford to the person causing or authorized to cause such excavation, license to enter upon the demised premises for the purpose of doing such work as said person shall deem necessary to preserve the wall or the building of which demised premises form a part from injury or damage and to support the same by proper foundations without any claim for damages or indemnity against Owner, or diminution or abatement of rent.

  • Underground Facilities All underground pipelines, conduits, ducts, cables, wires, manholes, vaults, tanks, tunnels, or other such facilities or attachments, and any encasements containing such facilities, including without limitation those that convey electricity, gases, steam, liquid petroleum products, telephone or other communications, cable television, water, wastewater, storm water, other liquids or chemicals, or traffic or other control systems.

  • NO HARDSTOP/PASSIVE LICENSE MONITORING Unless an Authorized User is otherwise specifically advised to the contrary in writing at the time of order and prior to purchase, Contractor hereby warrants and represents that the Product and all Upgrades do not and will not contain any computer code that would disable the Product or Upgrades or impair in any way its operation based on the elapsing of a period of time, exceeding an authorized number of copies, advancement to a particular date or other numeral, or other similar self-destruct mechanisms (sometimes referred to as “time bombs,” “time locks,” or “drop dead” devices) or that would permit Contractor to access the Product to cause such disablement or impairment (sometimes referred to as a “trap door” device). Contractor agrees that in the event of a breach or alleged breach of this provision that Authorized User shall not have an adequate remedy at law, including monetary damages, and that Authorized User shall consequently be entitled to seek a temporary restraining order, injunction, or other form of equitable relief against the continuance of such breach, in addition to any and all remedies to which Authorized User shall be entitled.

  • Time Off in Lieu of Overtime Employees who work overtime will not be required to take time off in regular hours to make up for overtime worked. Time off in lieu may be taken on a mutually agreed upon basis between the employee and the Hospital, such time off will be the equivalent of the premium rate the employee has earned for working overtime. The Hospital shall revert to payment of premium rate if time off is not taken within sixty (60) calendar days."

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins. (2) Maintain waterbars, drainage dips, and other water diversion measures. (3) During active use, patrol and maintain functional drainage. (4) Repair damaged culvert ends.

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the

  • Operations Fire An “Operations Fire” is a fire caused by Purchaser’s Operations other than a Neg- ligent Fire.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!