TRACKWAY AND SAFETY ACCESS Sample Clauses

TRACKWAY AND SAFETY ACCESS. A. Material and Equipment Access: Material and equipment access are via the roadway. If the Contractor needs roadway access for equipment and material the Contractor shall coordinate with WMATA. B. WMATA’s “Dynamic Envelope:” All materials and equipment provided under this contract to be transported to the project site (shaft and/or station) must fit within the WMATA dynamic envelope per the WMATA Design Criteria. This includes equipment manufactured to be placed on its side, manufactured in smaller components to be reassembled on site, etc. Equipment shall not be transported or handled in any way that violates the manufacturer’s warranty. These Dynamic Height and Width restrictions include the dimensions of a standard flat car being used for transport of the materials/equipment. C. The Design-Builder shall engineer, install, maintain, and finally remove temporary barriers separating WMATA roadway and platform areas from work areas requiring revenue and dayshift work activities. Barriers are to protect and demarcate personnel and material from affecting the roadway. These barriers must be “extraordinary” engineered physical barriers between tracks and “buffer” zones between tracks. These barriers must be designed and stamped by a Professional Engineer licensed in the jurisdiction where the barrier will be constructed/installed. Due to the risk of making third rail contact by workers or materials in shafts, Red Tag outages are required. In lieu of Red-Tags, a supervisory outage may be used if SAFE issued rubber-mats are used over the 3rd rail for impact. These xxxxxxx must be designed and stamped by a Professional Engineer licensed in the jurisdiction where the barrier/shielding will be constructed/installed. D. The Design-Builder shall plan for all tools, materials, and equipment needed to complete the work to be delivered directly to the worksite(s) prior to the commencement of the work.
Sample 1
AutoNDA by SimpleDocs

Related to TRACKWAY AND SAFETY ACCESS

  • Health and Safety Plan Consultant shall prepare and submit a Health and Safety Plan (“HASP”) for the portion of Consultant’s work that will involve field work, assessments, or investigations of certain Project elements. The HASP shall describe how Consultant plans to complete field work, assessments, and/or investigations at the RWF. Consultant’s HASP must comply with the CIP HASP and shall be updated as new conditions are encountered.

  • HEALTH AND SAFETY 25.01 The Employer is subject to the provisions of the Occupational Health and Safety Act of the Province of Ontario and its regulations, including the provision that calls for a worker representative selected by the Union on the University Joint Health and Safety Committees. It is agreed that the University and the Union will cooperate to the fullest possible extent in the prevention of accidents and the promotion of safety and health at University workplaces. To this end, the parties acknowledge and agree that all University Employees on University and third-party premises where Employees work, are required to comply with work- site specific policies, procedures, regulations, and standards relating to health and safety. 25.02 The Employer recognizes the right of workers to be informed about hazards in the workplace, to be provided with appropriate training, and the right to refuse unsafe work in accordance with the Occupational Health and Safety Act where there is an immediate danger to the Employee’s health and safety or to the health and safety of others. 25.03 The Union will select a worker representative for each applicable Joint Health and Safety Committee formed under the Occupational Health and Safety Act. Time spent attending meetings of the Committee or carrying out duties as a worker representative shall be considered time worked. 25.04 A worker representative on a Joint Health and Safety Committee may become a certified worker representative on the Committee. The University will provide the required training for certification at no cost to the Employee or the Union. Time spent in such training shall be considered time worked, as outlined in Article 13 – Hours of Work and Overtime. 25.05 When a worker representative on a Joint Health and Safety Committee ceases to be employed in the Bargaining Unit, he/she will cease to be a worker representative on the Committee. 25.06 The University will supply, and Employees will wear and/or utilize, personal protective equipment and the other devices that the University requires Employees to wear and/or utilize. 25.07 The Employer shall provide information, training and supervision to an Employee to protect the health and safety of that Employee. With reference to Article 13, time spent in such training shall be considered time worked, as outlined in Article 13 – Hours of Work and Overtime. 25.08 The name and contact information of the Health and Safety Officer in each Academic Unit shall be posted in the Department/Academic Unit. 25.09 In accordance with the Occupational Health and Safety Act, persons with authority in the workplace, including any Employees, shall ensure that persons under their authority are informed of health and safety hazards, and advised of policies and procedures associated with the safe handling of materials and equipment.

  • WORKPLACE HEALTH AND SAFETY The parties to this Agreement are committed to providing a safe and healthy workplace and work practices. The parties recognise that illness or injury at the workplace is costly to the employer and the employees and also disruptive to the respective parties. To facilitate healthy and safe work practices, the parties to the Agreement are committed to discussing health and safety issues as they apply to the operations of the employer as part of the consultative measures under this Agreement. The employer and employees under this agreement may refer to their respective industrial representatives for appropriate advice or expertise in enhancing performance with due regard to health and safety initiatives. The parties also recognise the importance of conducting regular audits of the employer's operations, policies and procedures including the employees' skills, knowledge, qualifications and application of healthy and safe work practices.

  • Child Safety BCHS values children from all backgrounds and is committed to making our community a safe, nurturing and welcoming place for children to grow and develop. We are committed to making sure ALL children reach their individual potential.

  • HEALTH, SAFETY AND ENVIRONMENT In the performance of this Contract, Contractor and Operator shall conduct Petroleum Operations with due regard to health, safety and the protection of the environment (“HSE”) and the conservation of natural resources, and shall in particular:

  • Cleanliness and Safety; Entry Resident agrees to maintain the assigned bedroom space, the apartment and the common areas of the Property in a clean, safe and sanitary condition, to exercise all due care in the use of same, and to cooperate fully with the Property pest control program as requested. Resident will be responsible for the cost of treatment for bedbugs and similar pests to the extent Owner’s pest control vendor reasonably determines that an infestation has originated within Resident’s assigned space and during Resident’s occupancy. Resident will place all trash in provided receptacles and will be responsible for the cost of cleaning the interior or exterior of the apartment if not kept in sanitary condition. When outdoor temperatures are below 40 degrees Fahrenheit, Resident will keep the apartment’s heat turned on to prevent frozen or burst pipes, including during vacations. When outdoor temperatures exceed 85 degrees Fahrenheit, Resident will keep the apartment’s air conditioning turned on and set to a reasonable temperature to prevent mold or mildew growth, including during vacations. Owner and its agents, employees and contractors may enter any apartment and bedroom space to perform routine maintenance, inspections, showings and other ordinary functions, provided that Owner will provide advance notice to residents of an apartment before such entry. Owner reserves the right to enter an apartment and any bedroom space without prior notice (including a passkey and/or disarming the alarm or other means of entry if locks have been changed) for emergency maintenance or repair purposes, or when there is reasonable cause to believe that a situation exists that could cause danger to life, safety, health or property. Owner may confiscate any item deemed to cause a danger and is under no obligation to pay compensation for or to return such items.

  • Fire Safety Resident will not tamper with fire alarms, smoke detectors, fire extinguishers, fire hoses, or exit signs. Resident will promptly evacuate Residence Facility upon the sounding of an alarm or as otherwise directed by College Housing staff. Resident will participate in any periodic fire drill and fire safety training conducted by College for the Residence Facility.

  • CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.

  • Work Health and Safety (a) The employer and employee acknowledge their responsibilities under the Work Health and Safety Act 2011 and Work Health and Safety Regulations 2012. (b) Where there is a Work Health and Safety Representative they must be elected and will carry out the tasks associated with the role of Work Health and Safety Representative set out within the Work Health and Safety Act 2011.

  • Environmental Health and Safety i. Environment, Health and Safety Performance. Seller acknowledges and accepts full and sole responsibility to maintain an environment, health and safety management system ("EMS") appropriate for its business throughout the performance of this Contract. Buyer expects that Seller’s EMS shall promote health and safety, environmental stewardship, and pollution prevention by appropriate source reduction strategies. Seller shall convey the requirement of this clause to its suppliers. Seller shall not deliver goods that contain asbestos mineral fibers.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!