TRADE RESTRICTION CLAUSE Sample Clauses

TRADE RESTRICTION CLAUSE. The contractor or subcontractor, by submission of an offer and/or execution of a contract, certifies that it: a. is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms published by the Office of the United States Trade Representative (USTR); b. has not knowingly entered into any contract or subcontract for this project with a person that is a citizen or national of a foreign country on said list, or is owned or controlled directly or indirectly by one or more citizens or nationals of a foreign country on said list; c. has not procured any product nor subcontracted for the supply of any product for use on the project that is produced in a foreign country on said list. Unless the restrictions of this clause are waived by the Secretary of Transportation in accordance with 49 CFR 30.17, no contract shall be awarded to a contractor or subcontractor who is unable to certify to the above. If the contractor knowingly procures or subcontracts for the supply of any product or service of a foreign country on said list for use on the project, the Federal Aviation Administration may direct through the Sponsor cancellation of the contract at no cost to the Government. Further, the contractor agrees that, if awarded a contract resulting from this solicitation, it will incorporate this provision for certification without modification in each contract and in all lower tier subcontracts. The contractor may rely on the certification of a prospective subcontractor unless it has knowledge that the certification is erroneous. The contractor shall provide immediate written notice to the sponsor if the contractor learns that its certification or that of a subcontractor was erroneous when submitted or has become erroneous by reason of changed circumstances. The subcontractor agrees to provide written notice to the contractor if at any time it learns that its certification was erroneous by reason of changed circumstances. This certification is a material representation of fact upon which reliance was placed when making the award. If it is later determined that the contractor or subcontractor knowingly rendered an erroneous certification, the Federal Aviation Administration may direct through the Sponsor cancellation of the contract or subcontract for default at no cost to the Government. Nothing contained in the foregoing shall be construed to require establishment of a system of records in orde...
Sample 1Sample 2Sample 3See All (17)
AutoNDA by SimpleDocs
TRADE RESTRICTION CLAUSE. The contractor or subcontractor, by submission of an offer and/or execution of a contract, certifies that it: a. is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms as published by the Office of the United States Trade Representative (U.S.T.R.); b. has not knowingly entered into any contract or subcontract for this project with a person that is a citizen or national of a foreign country included on the list of countries that discriminate against U.S. firms as published by the U.S.T.R; and c. has not entered into any subcontract for any product to be used on the Federal on the project that is produced in a foreign country included on the list of countries that discriminate against U.S. firms published by the U.S.T.
Sample 1Sample 2Sample 3See All (5)
TRADE RESTRICTION CLAUSE. The contractor or subcontractor, by submission of an offer and/or execution of a contract, certifies that it:
Sample 1
TRADE RESTRICTION CLAUSE. (49 CFR Part 30). 1) By submission of an offer, the Offeror certifies that with respect to this solicitation and any resultant contract, the Offeror: a) is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms published by the Office of the United States Trade Representative (“U.S.T.R.”); b) has not knowingly entered into any contract or subcontract for this project with a person that is a citizen or national of a foreign country included on the list of countries that discriminate against U.S. firms as published by the U.S.T.R.; and c) has not entered into any subcontract for any product to be used on the Federal on the project that is produced in a foreign country included on the list of countries that discriminate against U.S. firms published by the U.S.T.R. 2) This certification concerns a matter within the jurisdiction of an agency of the United States of America and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under 18 U.S.C. § 1001. 3) The Offeror/Contractor must provide immediate written notice to the Authority if the Offeror/Contractor learns that its certification or that of a subcontractor was erroneous when submitted or has become erroneous by reason of changed circumstances. The Contractor must require subcontractors provide immediate written notice to the Contractor if at any time it learns that its certification was erroneous by reason of changed circumstances. 4) Unless the restrictions of this clause are waived by the Secretary of Transportation in accordance with 49 CFR 30.17, no contract shall be awarded to an Offeror or subcontractor: a) Who is owned or controlled by one or more citizens or nationals of a foreign country included on the list of countries that discriminate against U.S. firms published by the U.S.T.R.; or b) Whose subcontractors are owned or controlled by one or more citizens or nationals of a foreign country on such U.S.T.R. list; or c) Who incorporates in the public works project any product of a foreign country on such U.S.T.R. list. 5) Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render, in good faith, the certification required by this provision. The knowledge and information of a contractor is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business d...
Sample 1
TRADE RESTRICTION CLAUSE. 15.2.1. The Contractor certifies that with respect to this Agreement, the Contractor: 15.2.1.1. Is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms published by the Office of the United States Trade Representative (“U.S.T.R.”); 15.2.1.2. Has not knowingly entered into any contract or subcontract for this project with a person that is a citizen or national of a foreign country included on the list of countries that discriminate against U.S. firms as published by the U.S.T.R; and; 15.2.1.3. Has not entered into any subcontract for any product to be used on a Federal project that is produced in a foreign country included on the list of countries that discriminate against U.S. firms published by the U.S.T.R. 15.2.2. This certification concerns a matter within the jurisdiction of an agency of the United States of America and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Xxxxx 00, Xxxxxx Xxxxxx Code, Section 1001. 15.2.3. The Contractor must provide immediate written notice to JMAA if the Contractor learns that its certification or that of a Sub-Contractor was erroneous when submitted or has become erroneous by reason of changed circumstances. The Contractor must require Sub-Contractors provide immediate written notice to the Contractor if at any time it learns that its certification was erroneous by reason of changed circumstances. 15.2.3.1. Unless the restrictions of this clause are waived by the Secretary of Transportation in accordance with 49 CFR 30.17, no contract shall be awarded to a Contractor or Sub-Contractor: 15.2.3.1.1. Who is owned or controlled by one or more citizens or nationals of a foreign country included on the list of countries that discriminate against U.S. firms published by the U.S.T.R.; or 15.2.3.1.2. Whose subcontractors are owned or controlled by one or more citizens or nationals of a foreign country on such U.S.T.R. list; or 15.2.3.1.3. Who incorporates in the public works project any product of a foreign country on such U.S.T.R. list. 15.2.4. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render, in good faith, the certification required by this provision. The knowledge and information of Contractor or any Sub-Contractor is not required to exceed that which is normally possessed by a prudent person in the ordina...
Sample 1
TRADE RESTRICTION CLAUSE. 49 CFR Part 30. The Consultant and/or its subcontractors, by submission of an offer and/or execution of an Agreement, certifies that it:
Sample 1
TRADE RESTRICTION CLAUSE. The CONSULTANT by execution of this contract, certifies that it: (a) is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms as published by the Office of the United States Trade Representative (U.S.T.R.); (b) has not knowingly entered into any contract or subcontract for this project with a person that is a citizen or national of a foreign country included on the list of countries that discriminate against U.S. firms as published by the U.S.T.R; and (c) has not entered into any subcontract for any product to be used on the Federal on the project that is produced in a foreign country included on the list of countries that discriminate against U.S. firms published by the U.S.T.
Sample 1
AutoNDA by SimpleDocs
TRADE RESTRICTION CLAUSE. The CONSULTANT or their sub consultants, by execution of an Agreement, certifies that it: 1. Is not owned or controlled by one or more citizens of a foreign country included in tbe list of countries that discrirninate against U.S. f=s published by the Office of the United States Trade Representative (USTR);
Sample 1
TRADE RESTRICTION CLAUSE. The CONSULTANT, by execution of this CONTRACT, certifies that it: A. is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms published by the Office of the United States Trade Representative (“USTR”); B. has not knowingly entered into any contract or subcontract for this PROJECT with a person that is a citizen or national of a foreign country on said list, or is owned or controlled directly or indirectly by one or more citizens or nationals of a foreign country on said list; and C. has not procured any product nor subcontracted for the supply of any product for use on the PROJECT this is produced in a foreign country on said list.
Sample 1

Related to TRADE RESTRICTION CLAUSE

  • Use Restriction (a) If a natural disaster, incident or any other emergency situation occurs or is likely to occur, SORACOM may restrict the use of the SORACOM Air Global Service by the Subscriber in order to give priority to communications whose content are necessary for the prevention of or relief from calamities, for the securing of transportation, communications or electric power supply, the maintenance of public order or any other public interest. (b) If SORACOM detects any significant and/or continuous signal or transmission using a communication procedure or application which occupies the communication band used by SORACOM, SORACOM may control the transmission rate and traffic of such signal or transmission by controlling the communication band allocated to such signal or transmission. (c) SORACOM may suspend or limit the use of the SORACOM Air Global Service by the Subscriber, if: (i) the Subscriber delays in performing or fails to perform any payment obligation or any other obligation under the Agreement; (ii) the Subscriber gives a false information to SORACOM; (iii) SORACOM deems that the Subscriber violates Section 13.1 below; (iv) the Subscriber falls under any of the items of Section 3.2; (v) the credit card account designated by the Subscriber is invalid, unavailable or cannot be used or recognized; or

  • Use Restrictions (a) Company will not do or attempt to do, and Company will not permit any other person or entity to do or attempt to do, any of the following, directly or indirectly: (i) use any Proprietary Item for any purpose, at any location or in any manner not specifically authorized by this Agreement; (ii) make or retain any copy of any Proprietary Item except as specifically authorized by this Agreement; (iii) create, recreate or obtain the source code for any Proprietary Item; (iv) refer to or otherwise use any Proprietary Item as part of any effort to develop other software, programs, applications, interfaces or functionalities or to compete with BNYM or a Third Party Provider; (v) modify, adapt, translate or create derivative works based upon any Proprietary Item, or combine or merge any Proprietary Item or part thereof with or into any other product or service not provided for in this Agreement and not authorized in writing by BNYM; (vi) remove, erase or tamper with any copyright or other proprietary notice printed or stamped on, affixed to, or encoded or recorded in any Proprietary Item, or fail to preserve all copyright and other proprietary notices in any copy of any Proprietary Item made by Company; (vii) sell, transfer, assign or otherwise convey in any manner any ownership interest or Intellectual Property Right of BNYM, or market, license, sublicense, distribute or otherwise grant, or subcontract or delegate to any other person, including outsourcers, vendors, consultants, joint venturers and partners, any right to access or use any Proprietary Item, whether on Company’s behalf or otherwise; (viii) subcontract for or delegate the performance of any act or function involved in accessing or using any Proprietary Item, whether on Company’s behalf or otherwise; (ix) reverse engineer, re-engineer, decrypt, disassemble, decompile, decipher, reconstruct, re-orient or modify the circuit design, algorithms, logic, source code, object code or program code or any other properties, attributes, features or constituent parts of any Proprietary Item; (x) take any action that would challenge, contest, impair or otherwise adversely effect an ownership interest or Intellectual Property Right of BNYM; (xi) use any Proprietary Item to provide remote processing, network processing, network communications, a service bureau or time sharing operation, or services similar to any of the foregoing to any person or entity, whether on a fee basis or otherwise; (xii) allow Harmful Code into any Proprietary Item, as applicable, or into any interface or other software or program provided by it to BNYM, through Company’s systems or personnel or Company’s use of the Licensed Services or Company’s activities in connection with this Agreement. (b) Company shall, promptly after becoming aware of such, notify BNYM of any facts, circumstances or events regarding its or a Permitted User’s use of the Licensed System that are reasonably likely to constitute or result in a breach of this Section 2.12, and take all reasonable steps requested by BNYM to prevent, control, remediate or remedy any such facts, circumstances or events or any future occurrence of such facts, circumstances or events.

  • LICENCE RESTRICTIONS Except as expressly set out in this XXXX or as specifically permitted by any local law, you agree: 4.1. not to copy the App except where such copying is incidental to normal use of the App, or where it is necessary for the purpose of back-up or operational security; 4.2. not to rent, lease, sub-license, loan, translate, merge, adapt, vary or modify the App; 4.3. not to make alterations to, or modifications of, the whole or any part of the App, or permit the App or any part of it to be combined with, or become incorporated in, any other programs; 4.4. not to disassemble, decompile, reverse-engineer or create derivative works based on the whole or any part of the App or attempt to do any such thing except to the extent that (by virtue of section 296A of the Copyright, Designs and Patents Act 1988) such actions cannot be prohibited because they are essential for the purpose of achieving inter-operability of the App with another software program, and provided that the information obtained by you during such activities: 0.0.0. Xx used only for the purpose of achieving inter-operability of the App with another software program; 0.0.0. xx not unnecessarily disclosed or communicated without our prior written consent to any third party; and 0.0.0. xx not used to create any software that is substantially similar or in competition to the App; 4.5. not to provide or otherwise make available the App in whole or in part (including object and source code), in any form to any person without prior written consent from Scienap; and 4.6. to comply with all technology control or export laws and regulations that may apply to the technology used or supported by the App or any Service. Together such conditions the “Licence Restrictions”.

  • License Restrictions Licensor reserves all rights not expressly granted to You. The Software is licensed for Your internal use only. Except as this Agreement expressly allows, You may not (1) copy (except for back-up purposes), modify, alter, create derivative works, reverse engineer, decompile, or disassemble the Software except and only to the extent expressly permitted by applicable law; (2) transfer, assign, pledge, rent, timeshare, host or lease the Software, or sublicense any of Your license grants or rights under this Agreement; in whole or in part, without prior written permission of Licensor; (3) remove any patent, trademark, copyright, trade secret or other proprietary notices or labels on the Software or its documentation; or (4) disclose the results of any performance, functional or other evaluation or benchmarking of the Software to any third party without the prior written permission of Licensor. Hosting Restrictions. In the event that You desire to have a third party manage, host (either remotely or virtually) or use the Software on Your behalf, You shall (1) first enter into a valid and binding agreement with such third party that contains terms and conditions to protect Licensor’s rights in the Software that are no less prohibitive and/or restrictive than those contained in this Agreement, including, without limitation, the Verification section below; (2) prohibit use by such third party except for the sole benefit of You; and (3) be solely responsible to Licensor for any and all breaches of the above terms and conditions by such third party.

  • Usage Restrictions Customer will not (a) make any Service or Content available to anyone other than Customer or Users, or use any Service or Content for the benefit of anyone other than Customer or its Affiliates, unless expressly stated otherwise in an Order Form or the Documentation, (b) sell, resell, license, sublicense, distribute, make available, rent or lease any Service or Content, or include any Service or Content in a service bureau or outsourcing offering, (c) use a Service or Non-Xxxxxx Application to store or transmit infringing, libelous, or otherwise unlawful or tortious material, or to store or transmit material in violation of third-party privacy rights, (d) use a Service or Non-Xxxxxx Application to store or transmit Malicious Code, (e) interfere with or disrupt the integrity or performance of any Service or third-party data contained therein, (f) attempt to gain unauthorized access to any Service or Content or its related systems or networks, (g) permit direct or indirect access to or use of any Services or Content in a way that circumvents a contractual usage limit, or use any Services to access or use any of Xxxxxx intellectual property except as permitted under this Agreement, an Order Form, or the Documentation, (h) modify, copy, or create derivative works based on a Service or any part, feature, function or user interface thereof, (i) copy Content except as permitted herein or in an Order Form or the Documentation, (j) frame or mirror any part of any Service or Content, other than framing on Customer's own intranets or otherwise for its own internal business purposes or as permitted in the Documentation, (k) except to the extent permitted by applicable law, disassemble, reverse engineer, or decompile a Service or Content or access it to (1) build a competitive product or service, (2) build a product or service using similar ideas, features, functions or graphics of the Service, (3) copy any ideas, features, functions or graphics of the Service, or (4) determine whether the Services are within the scope of any patent.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!