Cost Responsibility for Network Upgrades 9 5.1 Applicability 9 5.2 Network Upgrades 9
Scope of Services The specific scope of work for each job shall be determined in advance and in writing between TIPS Member, Member’s design professionals and Vendor. It is permitted for the TIPS Member to provide a general scope description, but the awarded vendor should provide a written scope of work, and if applicable, according to the TIPS Member’s design Professional as part of the proposal. Once the scope of the job is agreed to, the TIPS Member will issue a PO and/or an Agreement or Contract with the Job Order Contract Proposal referenced or as an attachment along with bond and any other special provisions agreed by the TIPS Member. If special terms and conditions other than those covered within this solicitation and awarded Agreements are required, they will be attached to the PO and/or an Agreement or Contract and shall take precedence over those in this base TIPS Vendor Agreement.
Retraining for Positions within the Hospital Where, with the benefit of retraining of up to six (6) months, an employee who has either accepted the layoff or who is unable to displace any other employee could be redeployed to a hospital position identified by the Redeployment Committee in accordance with Article 9.08(d)(i):
Training Plan Within 90 days after the Effective Date, Good Shepherd shall develop a written plan (Training Plan) that outlines the steps Good Shepherd will take to ensure that: (a) all Covered Persons receive adequate training regarding Good Shepherd’s CIA requirements and Compliance Program, including the Code of Conduct and (b) all Relevant Covered Persons receive adequate training regarding: (i) the Federal health care program requirements regarding eligibility for hospice services upon initial admission, recertification for continued stay, and for Continuous Care, Respite Care, and General Inpatient Care; (ii) the role of physicians in making eligibility determinations; (iii) the accurate coding and submission of claims; (iv) policies, procedures, and other requirements applicable to the documentation of medical records; (v) the personal obligation of each individual involved in the claims submission process to ensure that such claims are accurate; (vi) applicable reimbursement statutes, regulations, and program requirements and directives; (vii) the legal sanctions for violations of the Federal health care program requirements; and (viii) examples of proper and improper eligibility determinations, documentation, and claims submission practices. The Training Plan shall include information regarding the training topics, the categories of Covered Persons and Relevant Covered Persons required to attend each training session, the length of the training, the schedule for training, and the format of the training. Within 30 days of the OIG’s receipt of Good Shepherd’s Training Plan, OIG will notify Good Shepherd of any comments or objections to the Training Plan. Absent notification by the OIG that the Training Plan is unacceptable, Good Shepherd may implement its Training Plan. Good Shepherd shall furnish training to its Covered Persons and Relevant Covered Persons pursuant to the Training Plan during each Reporting Period.
Custom Branding for Directory Assistance (DA) is not available for certain classes of service, including but not limited to Hotel/Motel services, WATS service, and certain PBX services.
AIN Selective Carrier Routing for Operator Services, Directory Assistance and Repair Centers 4.3.1 BellSouth will provide AIN Selective Carrier Routing at the request of <<customer_name>>. AIN Selective Carrier Routing will provide <<customer_name>> with the capability of routing operator calls, 0+ and 0- and 0+ NPA (LNPA) 555-1212 directory assistance, 1+411 directory assistance and 611 repair center calls to pre-selected destinations.
Routing for Operator Services and Directory Assistance Traffic For a Verizon Telecommunications Service dial tone line purchased by MLTC for resale pursuant to the Resale Attachment, upon request by MLTC, Verizon will establish an arrangement that will permit MLTC to route the MLTC Customer’s calls for operator and directory assistance services to a provider of operator and directory assistance services selected by MLTC. Verizon will provide this routing arrangement in accordance with, but only to the extent required by, Applicable Law. Verizon will provide this routing arrangement pursuant to an appropriate written request submitted by MLTC and a mutually agreed-upon schedule. This routing arrangement will be implemented at MLTC's expense, with charges determined on an individual case basis. In addition to charges for initially establishing the routing arrangement, MLTC will be responsible for ongoing monthly and/or usage charges for the routing arrangement. MLTC shall arrange, at its own expense, the trunking and other facilities required to transport traffic to MLTC’s selected provider of operator and directory assistance services.
Training Services Training Services may include pre-packaged training Products, and/or the development or customization of training programs as requested, including Live Training, Computer Based/Multi-Media Training which encompasses Internet-Delivered Training, and/or Video Based Training.
SCOPE OF WORK AND RESPONSIBILITIES 1. Interconnection Customer’s Scope of Work and Responsibilities The Interconnection Customer will design, construct, own, operate and maintain the Interconnection Customer’s Interconnection Facilities and Collection Feeder Lines in accordance with the following requirements, to the extent not inconsistent with the terms of this Agreement, the ISO OATT or applicable NYISO Procedures: NYISO requirements, industry standards and specifications, regulatory requirements, the Connecting Transmission Owner’s applicable Connecting Transmission Owner’s Electric System Bulletins (“ESBs”), provided at the following website: xxxxx://xxx.xxxxxxxxxxxxxx.xxx/ProNet/Technical-Resources/Electric- Specifications, the System Protection and Interconnection Customer Attachment Facilities Electric Installation Specification for Xxxxxxxxx Solar Project provided as Appendix C to the Facilities Study for the Small Generating Facility (“Project Specific Specifications”), as such specifications shall be modified as a result of the Interconnection Customer’s post Facilities SERVICE AGREEMENT NO. 2557 Study modifications to the Interconnection Customer’s Interconnection Facilities, and Good Utility Practice. The Interconnection Customer shall submit all engineering design and electrical specifications associated with the Interconnection Customer’s Interconnection Facilities to the Connecting Transmission Owner for its review and acceptance in accordance with the ESBs and Project Specific Specifications. The metering of any redundant or standby station service provisions at the Xxxxxxxxx Solar Collector Substation shall be added in accordance with the Connecting Transmission Owner’s retail tariff, P.S.C. No. 220, and the Connecting Transmission Owner’s ESB 750. As per the Project Specific Specifications, the Interconnection Customer will install the RTU provided by Connecting Transmission Owner in accordance with Connecting Transmission Owner’s ESBs, indoors and within 15 feet of the meter(s), and remote from: • heavy traffic areas, work areas, and loading areas; • heat producing or high electrostatic or electromagnetic field producing equipment; and • station batteries. (Note: If no indoor facility is available, then installation of the RTU and revenue metering equipment in a dedicated, weatherproof, heated cubicle (accessible only to Connecting Transmission Owner) is acceptable.) For the revenue metering, the Interconnection Customer shall install a meter panel in accordance with the Project Specific Specifications, ESB 752 and ESB 750. The Interconnection Customer shall mount the revenue metering CT/PT units, make grounding connections, and complete all primary wiring. The Interconnection Customer shall install the meter socket enclosure near the Connecting Transmission Owner’s RTU in accordance with the Project Specific Specifications. Additional right-of-way (“ROW”) will be required for the construction, operation, and maintenance of the Line 301 Tap and must accommodate the 125’ x 125’ work pads required for the installation of the new structures. The Interconnection Customer is responsible for obtaining the property/easements needed for the Line 301 Tap line, access roads to/from the Line 301 Tap, and work pads, in accordance with the standards set forth in the Connecting Transmission Owner’s Standards and Requirements Relating to Third Party Acquisition and Transfer of Real Property Interests to Niagara Mohawk Power Corporation for Electric Facilities and Survey Specifications (January 2019). The Interconnection Customer is responsible for all permitting. Upon termination of this Agreement, Interconnection Customer shall be responsible for all costs associated with the decommissioning and removal of the Connecting Transmission Owner’s Interconnection Facilities.
Branding for Operator Call Processing and Directory Assistance 8.4.1 BellSouth's branding feature provides a definable announcement to Telepak Networks end users using Directory Assistance (DA)/ Operator Call Processing (OCP) prior to placing such end users in queue or connecting them to an available operator or automated operator system. This feature allows Telepak Networks’ name on whose behalf BellSouth is providing Directory Assistance and/or Operator Call Processing. Rates for the branding features are set forth in Exhibit D.
