Trim Allowance Sample Clauses

Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All All 20 ALL ALL 6 A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ All All Ton Forest Service approved locations with State certified scales meeting requirements in B6.814. Total (100%) Weight Scale .00 A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period N/A Ton per scaler Minimum volume for Intermittent Scaling Services N/A Ton on a N/A basis A12 - Fire Precautionary Period, applicable to B7.2 May 01 to September 30 , inclusive A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 10 road miles Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 50 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $3,700.00 A15 - Termination Date, applicable to B8.2 June 30, 2027 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: July 01 to October 01 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: Additional Payment: A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Softwood Lumber Index Number: 0811 A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B3.34 EMERGENCY RATE REDETERMINATION B4.211 DOWNPAYMENT B4.3 PAYMENT GUARANTEED BY BOND OR DEPOSITED B4.31 SECURITIES BLANKET BOND B4.4 PAYMENTS NOT RECEIVED B6.23 PROTECTION OF LAND SURVEY MONUMENTS B6.35 EQUIPMENT CLEANING B6.84 ACCOUNTABILITY B6.841 ROUTE OF HAUL B6.85 SCALING LOST PRODUCTS B8.212 MARKET-RELATED CONTRACT TERM B8.64 ADDITION DEBARMENT AND SUSPENSION B9.1 CERTIFICATION PERFORMANCE BOND B9.11 BOND REDUCTION
Sample 1See All (22)
AutoNDA by SimpleDocs
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All All 20 ALL ALL 6 A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ All All CCF Forest Service approved, State certified scale, per written agreement. Total (100%) Weight Scale .00
Sample 1See All (5)
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) A10 – Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ A11 – Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period (Volume and UOM) per scaler Minimum volume for Intermittent Scaling Services (Volume and UOM) on a basis A12 – Fire Precautionary Period, applicable to B7.2 to , inclusive A13 – Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Suppression, applicable to B7.3 Within road miles Fire Suppression Reinforcement, applicable to B7.312 and B7.313 Within road miles A14 – Purchaser’s Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ A15 – Termination Date, applicable to B8.2 A16 – Normal Operating Season, applicable to B6.31, B6.66, B8.21, and B9.3 First Period: to , inclusive Second Period: to , inclusive A17 – Performance Bond, applicable to B9.1 Performance Bond Amount: $ A18 – Downpayment, applicable to B4.211 Downpayment Amount: $ A19 – Periodic Payment Amounts, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: $ Additional Payment: $ A20 – Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Index Number: A21 – Inapplicable Standard Provisions
Sample 1See All (4)
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) ALL ALL N/A ALL ALL 6 A10 – Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ ALL ALL Ton Approved locations with State Certified scales meeting the requirements contained in B6.814 Weight 100% A11 – Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period N/A per scaler Minimum volume for Intermittent Scaling Services N/A on a N/A basis A12 – Fire Precautionary Period, applicable to B7.2 May 1 to September 30 , inclusive A13 – Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Suppression, applicable to B7.3 Within 10 road miles Fire Suppression Reinforcement, applicable to B7.312 and B7.313 Within 50 road miles A14 – Purchaser’s Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ 4,300 A15 – Termination Date, applicable to B8.2 September 30, 2020 A16 – Normal Operating Season, applicable to B6.31, B6.66, B8.21, and B9.3 First Period: July 15 (Units13,13A,23,49,49A, to September 30 , inclusive 50,50A,90,95,94,100,101,104) Second Period: December 20 (Units 15,15A,24,24A,25A, 25B,26,27,94A,96,97,97A, to February 15 , inclusive 98,98A,98B,98C,98D) A17 – Performance Bond, applicable to B9.1 Performance Bond Amount: $ 16,000 A18 – Downpayment, applicable to B4.211 Downpayment Amount: $ A19 – Periodic Payment Amounts, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: $ Additional Payment: $ A20 – Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Softwood Lumber Index Number: 0811 A21 – Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B – Standard Provisions – are hereby made inapplicable. (Instructions: List by reference number and title.) B4.211 Downpayment B6.84 Accountability B4.4 Payments Not Received B6.841 Route of Haul B6.23 Protection of Land Survey Monuments B6.85 Equipment Cleaning B6.35 Equipment Cleaning B8.211 Delay in Reconstruction of Processing Facilities A22 – List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division C. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) See Attached Sheet...
Sample 1
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All All 0 ALL ALL 0 SAMPLE A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ All All Ton Purchaser will request an alternate scaling site per B6.811 which meets the requirements contained in B6.814 Total (100%) Weight Scale .00
Sample 1
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches)
Sample 1
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All Non-saw Weight scale All 20 6.0
Sample 1
AutoNDA by SimpleDocs
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) 5 Contract 2400-6, Page 105 (4/04) PLYMOUTH MULTIPRODUCT
Sample 1
Trim Allowance. Diameter Range (inches) Length Range (feet) Trim Allowance (inches) A.10 – Scaling Services, applicable to G.8.1 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $
Sample 1

Related to Trim Allowance

  • Per Diem Allowance A per diem allowance of seven dollars and thirty-five cents ($7.35) may be claimed for each twenty-four (24) hour period while away from home.

  • Shoe Allowance The Employer will provide reimbursement to full time employees who have completed probation and who are employed in the kitchen and stewarding departments, once per year in the amount of $60.00 and once every two years in the amount of $60.00 for maintenance and banquet housepersons. The amount shall increase to $75, effective January 1, 2007. Employees will receive said amount as long as the shoes are approved by the employer and as long as the shoes are worn on the job. Payment will be made on or about July 1 upon presentation of proof of purchase.

  • Meal Allowance A shift worker who works a qualifying shift of eight hours or the rostered shift, whichever is the greater, and who is required to work more than one hour beyond the end of the shift (excluding any break for a meal) shall be paid a meal allowance of $7.95, or, at the option of the employer, be provided with a meal.

  • Aid Allowance An employee who has been appointed by the Employer and trained to render first aid and who is the current holder of appropriate first aid qualifications such as a certificate from the St. Xxxx's Ambulance or similar body shall be paid weekly an allowance as detailed in Appendix A. The Employer will always appoint the appropriate number of First Aid Officers as required by relevant legislation and Code of Practice.

  • MINIMUM ALLOWANCE An employee who is required by his/her Agency/Department Head to use his/her private automobile at least eight days in any month on County business shall not receive less than $10 in that month for the use of his/her automobile.

  • Tool Allowance (a) A tool allowance as set in the relevant Wage Tables in Appendix A per week shall be paid for all purposes to:-

  • First Aid Allowance An employee who has been trained to render first aid and who is the current holder of appropriate first aid qualifications such as a certificate from the St. John's Ambulance or similar body shall be paid a weekly allowance of $11.50 if appointed by their employer to perform first aid duty.

  • Shift Allowance In addition to the wage specified in sub-clause (1), read with sub- clause (12), a normal shift worker shall, in respect of his shift hours worked in any week, be paid an additional 12,5% on such wage.

  • Boot Allowance The District will pay $180 toward the purchase and/or repair of work boots for District Employees listed in the District’s Work Apparel Policy and/or at the discretion of the employee’s department manager. Payment will be made by the first full paycheck of the employee’s date of hire and annually thereafter. Boots must meet applicable OSHA standards for the duties assigned.

  • Retirement Allowance Prior to issuing notice of layoff pursuant to article 9.08(a)(ii) in any classification(s), the Hospital will offer early-retirement allowance to a sufficient number of employees eligible for early retirement under HOOPP within the classification(s) in order of seniority, to the extent that the maximum number of employees within a classification who elect early retirement is equivalent to the number of employees within the classification(s) who would otherwise receive notice of layoff under article 9.08(a)(ii). An employee who elects an early retirement option shall receive, following completion of the last day of work, a retirement allowance of two (2) weeks' salary for each year of service, plus a prorated amount for any additional partial year of service, to a maximum ceiling of fifty-two (52) weeks' salary.

Time is Money Join Law Insider Premium to draft better contracts faster.