Ulterior subprocessing Sample Clauses

Ulterior subprocessing. Customer hereby gives a general authorization to EasyMovie to use sub-processors in the implementation of the processing. Customer has been informed and accepts the list of sub-processors accessible at the following address: https://www.easy.xxxxx/xxxx/xxx-xxxxxxxxxx. EasyMovie undertakes to inform Customer before any addition or change of a sub-processor by updating the above-mentioned list to be consulted by Customer on a regular basis. Starting from the date of the addition or modification of the relevant subprocessor within said list, Customer shall have a period of ten (10) days to send its observations to EasyMovie. In the absence of a response from Customer or in case of use by Customer of the EasyMovie Application and the EasyMovie Platform after this period, Customer will be deemed to have accepted the addition or the subsequent change of the considered sub- processor. In case of objection duly justified by GDPR and not lifted within the aforementioned ten (10) days period, Customer shall have the right to terminate the Agreement by sending a notice to EasyMovie by registered mail with acknowledgment of receipt. Customer shall then cease to use the EasyMovie Application and EasyMovie Platform upon expiry of the aforementioned ten (10) days period. EasyMovie undertakes that the services of any sub-processors to which it is relying shall be governed by a legal instrument that will bear the same obligations as those to which it is itself subject under the Addendum. EasyMovie will ensure that the technical and organizational measures put in place by its subsequent sub-processors comply with the requirements of the GDPR and will remain fully responsible to Customer for compliance with their obligations.
Sample 1Sample 2
AutoNDA by SimpleDocs
Ulterior subprocessing. The Customer hereby gives a general authorization to EasyMovie to use sub-processors in the implementation of the processing. EasyMovie undertakes to inform the Customer in advance before any addition or change of a sub-processor. Upon receipt of this information, the Customer will have a period of ten (10) days to send comments to EasyMovie. In the absence of a response from him after this period, the Customer will be deemed to have accepted the addition or the subsequent change of the considered sub-processor. The Customer already accepts that EasyMovie has recourse to the following sub-processors: Ireland Limited - Head Office Use of a Address: Xxxxxx Not applicable speech-to-text House, Xxxxxx solution Xxxxxx, Xxxxxx 0, Ireland - Name: Polilingua UK Ltd. - Head Office Address: 0 Xxxxxx Xx., London SE8 4DQ, United Kingdom Standard contractual clauses of the European Commission: xxxxx://xxx-xxx.xxxxx x.xx/xxxxx-xxxxxxx/X R/ALL/?uri=celex%3 A32010D0087 Provision of translation services - Name: Google LLC - Head Office Address: 0000 Xxxxxxxxxxxx Xxxx, Xxxxxxxx Xxxx, Xxxxxxxxxx 00000, X.X.X. Privacy Shield: xxxxx://xxx.xxxxxxx xxxxxx.xxx/xxxxxxxxxx t?id=a2zt000000001 L5AAI Use of the G-Suite solution - Name: EasyMovie Tunisia - Address of the registered office: 00 Xxxxxx xx Xxxxx, Xxxxxx X00, 0xx xxxxx Xxxx X, Xxxxxxxxxxx, 1073 Tunis - Tunisia Standard contractual clauses of the European Commission: xxxxx://xxx-xxx.xxxxx x.xx/xxxxx-xxxxxxx/X R/ALL/?uri=celex%3 A32010D0087 Provision of video editing services - Name: Amazon Web Services EMEA SARL - Head Office Address: 00 Xxxx X. Xxxxxxx Avenue, L-1855, Luxembourg Not applicable Provision of hosting services Use of a speech-to-text solution - Name: Xxxxxxxxxx.xxx France - Head Office Address: 0 xxxxxx Xxxxxx Xxxxxx, 75007 Paris, France Not applicable Use of a CRM solution - Name: Zendesk Inc. - Head Office Address: 0000 Xxxxxx Xxxxxx, Xxx Xxxxxxxxx, Xxxxxxxxxx 00000 X.X.X. Binding corporate rules: xxxxx://x0xxxx0xx0 0xx0.xxxxxxxxxx.xxx/ pdf/ZENDESK%20-% 20BCR%20Processor %20Policy.pdf Use of a customer service solution - Name: Mailjet SAS - Head Office Address: 00-00 xxx, xxx xx x'Xxxxxx - 00000 Xxxxx, Xxxxxx Not applicable Use of a solution to send transactional emails - Name: Xxxxxxx.xx, Inc. - Head Office Address: 000 Xxxxxxxxxx Xxxxxx, Xxxxx 000 - Xxx Xxxxxxxxx, XX 00000, XXX Privacy Shield: xxxxx://xxx.xxxxxxx xxxxxx.xxx/xxxxxxxxxx t?id=a2zt00000008 WCkAAM&status=Act ive Use of a solution for the monitor...
Sample 1

Related to Ulterior subprocessing

  • Subprocessing The data importer shall not subcontract any of its processing operations performed on behalf of the data exporter under the Clauses without the prior written consent of the data exporter. Where the data importer subcontracts its obligations under the Clauses, with the consent of the data exporter, it shall do so only by way of a written agreement with the subprocessor which imposes the same obligations on the subprocessor as are imposed on the data importer under the Clauses. Where the subprocessor fails to fulfil its data protection obligations under such written agreement the data importer shall remain fully liable to the data exporter for the performance of the subprocessor's obligations under such agreement.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.2.1 Local circuit switching capability is defined as: (A) line-side facilities, which include, but are not limited to, the connection between a loop termination at a main distribution frame and a switch line card; (B) trunk-side facilities, which include, but are not limited to, the connection between trunk termination at a trunk-side cross-connect panel and a switch trunk card; (C) switching provided by remote switching modules; and (D) all features, functions, and capabilities of the switch, which include, but are not limited to: (1) the basic switching function of connecting lines to lines, line to trunks, trunks to lines, and trunks to trunks, as well as the same basic capabilities made available to BellSouth’s customers, such as a telephone number, white page listings, and dial tone; and (2) all other features that the switch is capable of providing, including but not limited to customer calling, customer local area signaling service features, and Centrex, as well as any technically feasible customized routing functions provided by the switch. Any features that are not currently available but are technically feasible through the switch can be requested through the BFR/NBR process. 4.2.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for Louisville Telephone when Louisville Telephone serves an end-user with four (4) or more voice-grade (DS-0) equivalents or lines served by BellSouth in one of the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non- discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.2.3 In the event that Louisville Telephone orders local circuit switching for an end user with four (4) or more DS0 equivalent lines within Density Zone 1 in an MSA listed above, BellSouth shall charge Louisville Telephone the market based rates in Exhibit B for use of the local circuit switching functionality for the affected facilities.

  • Solicitations for Subcontracts, Including Procurement of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Local Government for work to be performed under a subcontract, including procurement of materials or leases of equipment, each potential subcontractor or supplier will be notified by the Local Government of the Local Government’s obligations under this Agreement and the Acts and Regulations relative to Nondiscrimination on the grounds of race, color, or national origin.

  • CERTIFICATION OF NO ASBESTOS CONTAINING MATERIALS OR WORK 8.1 The Contractor shall be responsible for ensuring that no asbestos containing materials or work is included within the scope of the Work. The Contractor shall take whatever measures it deems necessary to insure that all employees, suppliers, fabricators, material men, subcontractors, or their assigns, comply with this requirement. 8.2 The Contractor shall ensure that Texas Department of Health licensed individuals, consultants or companies are used for any required asbestos work including asbestos inspection, asbestos abatement plans/specifications, asbestos abatement, asbestos project management and third-party asbestos monitoring.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Solicitations for Subcontractors, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the contractor for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the contractor of the contractor's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin, sex, age, and disability/handicap.

  • Solicitations for Subcontracts, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the Engineer of the Engineer's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.

  • Subprocessor For the purposes of this DPA, the term “Subprocessor” (sometimes referred to as the “Subcontractor”) means a party other than LEA or Provider, who Provider uses for data collection, analytics, storage, or other service to operate and/or improve its service, and who has access to Student Data.

  • Removal of Improvements All items of Landlord’s construction, all heating, ventilating and air conditioning equipment and all permanent improvements installed by Landlord shall be the property of Landlord and shall not be removed from the Leased Premises without the prior written consent of Landlord. All trade fixtures, furniture, furnishings and signs installed in the Leased Premises by Xxxxxx and paid for by Tenant shall remain the property of Tenant, and may be removed upon the expiration of the Term of this Lease, provided that: i. Tenant shall have fully performed all of the covenants, conditions and provisions to be performed by Tenant under this Lease; and ii. Tenant repairs any damage to the Leased Premises or the Building caused by such removal and restores the Leased Premises to the condition that existed on the commencement date of this Lease, reasonable wear and tear excepted. If Tenant fails to remove any such items from the Leased Premises within thirty (30) days after the expiration or earlier termination of this Lease, all such trade fixtures, furniture, furnishings and signs shall, at Landlord’s options, become the property of Landlord, unless Landlord elects to require their removal, in which case Tenant shall promptly remove the same and restore the Leased Premises to its prior condition. If Tenant fails to promptly remove the same, Landlord may remove and store such items at the expense of Tenant.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!