Major Decisions (A) Subject to Sections 7.3(C) and 7.3(D) with respect to the Company, all major decisions of the Company set forth below in clauses (A)(1) through (A)(6) (“Major Decisions”) shall be subject to the Company’s Articles of Incorporation and joint approval by the Advisor and Sub-advisor. For the avoidance of doubt, Major Decisions specifically exclude any decisions regarding the day-to-day operations of the Company, the decision-making authority for which has been delegated to the Sub-advisor pursuant to this Agreement. Major Decisions shall consist of the following:
(1) Decisions to recommend to the Board of Directors that the Company acquire or sell Properties, Loans and other Permitted Investments;
(2) Retention of investment banks for the Company;
(3) Marketing methods for the Company’s sale of Shares;
(4) Extending, initiating or terminating the Initial Public Offering or any subsequent Offering of the Shares;
(5) Issuing press releases involving the major decisions of the Company or the Advisor or Sub-advisor or their Affiliates with respect to the business or operations of the Company; provided, that the Sub-advisor need not obtain consent to any press releases regarding acquisitions or dispositions of Properties, Loans or other Permitted Investments; and provided further, however, that notwithstanding the immediately preceding proviso, any mention of the Advisor or its Affiliates in such press releases regarding acquisitions or dispositions shall be pre-approved by the Advisor; and
(6) Merging or otherwise engaging in any change of control transaction for the Company.
(B) Notwithstanding anything in this Agreement to the contrary, if the Parties do not agree to any action constituting a Major Decision that is described in any of clauses (A)(2) through (A)(6) above and that has been proposed by either Party, the Parties shall meet (in person or by phone) to discuss the issue in dispute in good faith over the five-business day period beginning with the delivery of notice of the proposed action to the other Party.
(C) Notwithstanding anything in this Agreement to the contrary, with respect to Major Decisions described in clause (A)(1) above (but subject to Section 7.3(D)), (1) joint approval shall not be required, (2) the Sub-advisor and the Advisor shall discuss the proposed transaction (either in person or by phone) prior to either Party making any recommendation of the proposed transaction to the Board of Directors, and (3) the Sub-Advisor and the Advisor shall each give due consideration to the opinions of the other Party. Ordinarily, such discussions shall begin at least five business days before a recommendation is made to the Board of Directors; however, if in the sole discretion of the Sub-advisor it is in the best interest of the Company to make a recommendation to the Board of Directors more promptly, then the Sub-advisor may do so. In the event the Parties do not agree as to whether to recommend the proposed transaction to the Board of Directors, the Sub-advisor’s decision shall govern.
(D) Notwithstanding the provisions of this Section 7.3 or any other provision in this Agreement to the contrary, in all events, including Major Decisions, the Company will be managed under the direction of the Board of Directors.
(E) Notwithstanding anything in this Agreement to the contrary (but subject to Section 7.3(D)), the Sub-advisor shall have sole authority to act on behalf of the Company regarding amending the Advisory Agreement.
Investment Decisions The Subadviser shall determine from time to time what investments and securities will be purchased, retained, sold or loaned by the Series, and what portion of such assets will be invested or held uninvested as cash.
ADB’s Review of Procurement Decisions 11. All contracts procured under international competitive bidding procedures and contracts for consulting services shall be subject to prior review by ADB, unless otherwise agreed between the Borrower and ADB and set forth in the Procurement Plan.
Technical Advisory Committee (TAC The goal of this subtask is to create an advisory committee for this Agreement. The TAC should be composed of diverse professionals. The composition will vary depending on interest, availability, and need. TAC members will serve at the CAM’s discretion. The purpose of the TAC is to: • Provide guidance in project direction. The guidance may include scope and methodologies, timing, and coordination with other projects. The guidance may be based on: o Technical area expertise; o Knowledge of market applications; or o Linkages between the agreement work and other past, present, or future projects (both public and private sectors) that TAC members are aware of in a particular area. • Review products and provide recommendations for needed product adjustments, refinements, or enhancements. • Evaluate the tangible benefits of the project to the state of California, and provide recommendations as needed to enhance the benefits. • Provide recommendations regarding information dissemination, market pathways, or commercialization strategies relevant to the project products. The TAC may be composed of qualified professionals spanning the following types of disciplines: • Researchers knowledgeable about the project subject matter; • Members of trades that will apply the results of the project (e.g., designers, engineers, architects, contractors, and trade representatives); • Public interest market transformation implementers; • Product developers relevant to the project; • U.S. Department of Energy research managers, or experts from other federal or state agencies relevant to the project; • Public interest environmental groups; • Utility representatives; • Air district staff; and • Members of relevant technical society committees. • Prepare a List of Potential TAC Members that includes the names, companies, physical and electronic addresses, and phone numbers of potential members. The list will be discussed at the Kick-off meeting, and a schedule for recruiting members and holding the first TAC meeting will be developed. • Recruit TAC members. Ensure that each individual understands member obligations and the TAC meeting schedule developed in subtask 1.11. • Prepare a List of TAC Members once all TAC members have committed to serving on the TAC. • Submit Documentation of TAC Member Commitment (such as Letters of Acceptance) from each TAC member. • List of Potential TAC Members • List of TAC Members • Documentation of TAC Member Commitment
Union Negotiating Committee Leave of absence shall be granted to not more than seven (7) employee representatives selected to negotiate the renewal of the Collective Agreement for necessary time off including travel time, direct negotiating time, and necessary preparation time. The Union shall reimburse the College for all pay during such leave except for the days scheduled by the parties for direct negotiations and up to a maximum of ten (10) days if required, for meetings of the Union Negotiating Committee to prepare for and to complete bargaining.
Statewide HUB Program Statewide Procurement Division Note: In order for State agencies and institutions of higher education (universities) to be credited for utilizing this business as a HUB, they must award payment under the Certificate/VID Number identified above. Agencies, universities and prime contractors are encouraged to verify the company’s HUB certification prior to issuing a notice of award by accessing the Internet (xxxxx://xxxxx.xxx.xxxxx.xx.xx/tpasscmblsearch/index.jsp) or by contacting
Joint Steering Committee Promptly after the Effective Date, the Parties will form a Joint Steering Committee (the “JSC”) composed of an equal number of employees of each of Curis and Genentech, but in no event to exceed four (4) members from each Party. The JSC shall determine the specific goals for the Collaboration, shall manage the ongoing research conducted under the Collaboration in accordance with the Research Plan, shall monitor the progress and results of such work, and shall oversee and coordinate the development and commercialization of Compounds (other than Collaboration Products); provided, however, that the JSC shall not have decision-making authority with respect to the development and commercialization of Collaboration Products, which shall be governed by the CSC. The presence of at least one (1) representative of each Party shall constitute a quorum for the conduct of any JSC meeting. All decisions of the JSC shall require unanimous approval, with the representatives of each Party collectively having one (1) vote, provided in the event of a deadlock, the issue shall be referred to the Chief Executive Officer of Curis and the Senior Vice President of Research of Genentech, or their respective designees, who shall promptly meet and attempt in good faith to resolve such issue within thirty (30) days. If such executives cannot resolve such matter, then Genentech shall have final decision-making authority with regard to decisions regarding the Collaboration (including, without limitation, the JSC’s designation of a Compound as either a Lead Product or Excluded Product); provided, however, that in no event shall Genentech have the right or power to take any of the following actions without the approval of Curis’ representatives on the JSC:
(a) approve the initial Research Plan (an outline of which has been agreed upon by the Parties as of the Effective Date);
(b) amend or modify this Agreement or the Research Plan;
(c) resolve any such matter in a manner that conflicts with the provisions of this Agreement (including, without limitation, the Research Plan);
(d) make any decision with respect to the development or commercialization of Curis Products; or
(e) make any decision with respect to the prosecution, maintenance, defense or enforcement of any Curis Patents. The JSC shall meet at such frequency as the JSC agrees, except that, until the filing of the first IND for a Lead Product utilizing Systemic Delivery in a Major Market, the JSC shall meet on at least a quarterly basis. Meetings of the JSC, and JSC dispute resolution meetings between Curis’ Chief Executive Officer and Genentech’s Senior Vice President of Research (or their designees), may be conducted by videoconference, teleconference or in person, as agreed by the Parties, and the Parties shall agree upon the time and place of meetings. A reasonable number of additional representatives of a Party may attend meetings of the JSC in a non-voting capacity. The JSC shall exist for so long as either any work is being conducted under the Research Plan or any Compound is being developed or commercialized by Genentech, Curis, or any of their respective Affiliate(s) or sublicensee(s) in any Major Market. The JSC shall also be responsible for designating one or more representatives of each Party with expertise in patent law (which individuals need not be members of the JSC) to oversee intellectual property matters relating to the Collaboration, subject to the provisions of Article 10, and such patent committee shall coordinate with and report to the JSC.
Project Steering Committee 1. For a sound implementation and management of the project, a steering committee shall be set up in line with provisions of the programme manual.
2. The steering committee is the decision-making body of the project and it shall be composed by representatives of the LP and all PPs duly authorised to represent the respective LP and PP institutions. It shall be chaired by the LP and it shall meet on a regular basis. Associated partners shall be invited to take part in the steering committee in an advisory capacity. External key stakeholders may also be invited to take part to one or more meetings in an observer/advisory capacity.
3. The steering committee shall at least:
a. be responsible for monitoring and validating the implementation of the project and the achievement of the planned results as in the approved application form;
b. perform the financial monitoring of the project implementation and to decide on any budget modifications as in § 11 of this agreement;
c. monitor and manage deviations of the project implementation;
d. decide on project modifications (e.g. partnership, budget, activities, and duration) if needed;
e. be responsible for the settlement of any disputes within the partnership (as stipulated in § 22 of this agreement).
4. Further aspects, including the creation of sub-groups or task forces, may be set out in the rules of procedure of the steering committee.
Joint Union/Management Committee It shall be appropriate for either the Union or the University to request that a Joint Union/Management committee be convened, with Environmental Health and Safety as a participating member, to discuss health and safety concerns and to explore options for addressing those concerns through appropriate training or other approaches.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning):
1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises.
2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated.
3. If capacity exists, provide "side-door" porting through the switch.
4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch).
2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases.
2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.
