Baseline test definition

Baseline test means a stop or a series of stops carried out in order to confirm the performance of the brake prior to subjecting it to a further test such as the heating procedure or wet brake stop.
Sample 1Sample 2Sample 3
Baseline test means an emissions test of a motor vehicle or motor vehicle engine in a proper state of maintenance prior to any modifications necessary to operate on an alternative fuel.
Sample 1Sample 2Sample 3
Baseline test means a set of tests to demonstrate to the reasonable satisfaction of the system operator that the equipment and associated systems are able to, and will continue to be able to, meet the performance requirements of the ancillary service for which the equipment and associated systems is offered or is intended to be offered;
Sample 1Sample 2

Examples of Baseline test in a sentence

  • In the absence of detailed information in regard to the timing of the peak flooding in LT Creek, particularly in relation to the rising Lake condition, the peak Lake flood level was adopted as a constant water level boundary for the simulation of the LT Creek flooding for the 1981 event.

  • Please review the enclosed document carefully and be sure that you understand all conditions.

  • Baseline test set keyword accuracy (%) for the 1st ‘CHiME’ Challenge.

  • After the ImPACT Baseline test is taken by the student, a parent/guardian needs to enter the date of the test into the Student Tracker in Magnus.

  • Baseline test scores on our independent tests in both subjects are higher for students assessed by the CAL program as being at a higher grade level of achievement, which helps to validate the grade-level benchmarking by the CAL program (See Figure A.3).

  • The Baseline test provides a personal, individual comparison to any test that may be taken after an injury.

  • Baseline test results for short range mangnetron pulse for various combinations of video thresholds and SNR.

  • Instructions for completion of the Baseline test at home are posted on the website (under the “Athletics” tab), and this requirement is highlighted in summer correspondence to all students and families.

  • Baseline test scores are standardized by the mean and standard deviations of the test scores of the control group.

  • Baseline test scores were the prior test scores on mathematics midterm examination that is a standardized test conducted across the public schools in the city of New Delhi.


More Definitions of Baseline test

Baseline test means the applicable emissions or fuel economy test conducted pursuant to section 2208.3 on a non-hybrid vehicle for the purposes of comparison with emission or fuel economy testing results for its hybrid counterpart to determine potential emission or fuel economy impacts of hybridization.
Sample 1Sample 2
Baseline test means the initial assessment through a urine
Sample 1

Related to Baseline test

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Incurrence Test means the incurrence test set out in Clause 12.1 (Incurrence Test).

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Performance and Guarantee Test means all operational checks and tests required to determine and demonstrate capacity, efficiency and operating characteristics as specified in the Contract Documents.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.