Connectivity Test definition

Connectivity Test means the connectivity test to be conducted by the Contractor in accordance with Annex 3 to Part 6 – Specifications.
Sample 1Sample 2Sample 3
Connectivity Test shall have the meaning set forth in Section 1.4.1(a). -----------------
Sample 1Sample 2Sample 3
Connectivity Test. Customer will randomly select one (1) Client Cable Modem (CCM) on the Customer's network. Workstation (PC with Windows 95 End Node) to System's network connectivity will be established and verified by a user's CCM being logged onto the network . PING TEST: Once the user is network attached, the Customer and Hybrid will conduct Ping testing. See Windows 95 DOS Ping command listed below. LOCAL PING TEST: With the Ping command, you can send a ping request to the local CCM to verify that it is receiving information. Enter the IP address of the CCM in the destination-list field. From the Windows 95 DOS prompt enter "ping (CCM IP Address)".
Sample 1

Examples of Connectivity Test in a sentence

  • Unless otherwise agreed by AOLB and Itau, the Connectivity Test will be used in the Network Expansion Plan to determine whether the Co-Branded Service and the local network to support it are ready for roll- out in an Additional City.

  • Itau shall conduct the Connectivity Test in each Initial City and in the event Itau believes the Connectivity Test has not been met in any such city, AOLB and Itau shall promptly reperform such test.

  • Itau shall conduct the Connectivity Test in each Additional City in which AOLB and Itau agree to Launch the Co-Branded Service and in the event Itau believes the Connectivity Test has not been met in any such Additional City, AOLB and Itau shall promptly reperform such test.

  • The Network Expansion Plan shall provide sufficient time for the Connectivity Test to be completed.

  • The Launch Criteria include the connectivity test set forth on Exhibit G-2 (the "Connectivity Test").

  • Damages for Failure to Meet Migration Plan and Cutover The following liquidated damages shall apply for each of the designated Milestones: Milestone Liquidated Damages Final Migration Plan $25,000 Network Connectivity Test $25,000 Systems Software and Application Test $25,000 Final Cutover of all Services $25,000 Liquidated damages accrue upon the failure to meet any of the Milestones, provided, however, that if the final Milestone is met by Supplier, all accrued liquidated damages are waived by Wards.


More Definitions of Connectivity Test

Connectivity Test. Customer will randomly select one (1) Client Cable Modem (CCM) on the Customer's network. Workstation (PC with Windows 95 End Node) to System's network connectivity will be established and verified by a user's CCM being logged onto the network.
Sample 1

Related to Connectivity Test

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Cannabis testing facility means an entity registered by

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Interoperability means the ability of a Qwest OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • State Level Monitoring Cell means the body constituted by the State Government for the control and elimination of ragging in institutions within the jurisdiction of the State, established under a State Law or on the advice of the Central Government, as the case may be.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Disinfection profile means a summary of Giardia lamblia inactivation through the treatment plant.

  • IVR means Interactive Voice Response.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Maintenance Outage means NERC Event Type MO, as set forth in attached Exhibit B, and includes any outage involving ten percent (10%) of the Facility’s Net Output that is not a Forced Outage or a Planned Outage.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.