Hydrogen Sulfide definition

Hydrogen Sulfide. The Committed Gas shall not contain more than four parts per million (4 ppm) of hydrogen sulfide as determined by a quantitative test generally accepted in the natural gas industry for such purpose.
Hydrogen Sulfide or “H2S” means the chemical compound containing two atoms of hydrogen and one of sulfur with a molecular weight of 34.07 g/mole.
Hydrogen Sulfide means an inflammable, poisonous gas that is found in some water supplies and which makes water smell like rotten eggs.

Examples of Hydrogen Sulfide in a sentence

  • Hydrogen Sulfide (H2S) monitors shall be installed prior to drilling out the surface shoe.

  • If H2S is detected in concentrations greater than 100 ppm, the Hydrogen Sulfide area shall meet Onshore Order 6 requirements, which includes equipment and personnel/public protection items.

  • If Hydrogen Sulfide is encountered, provide measured values and formations to the BLM.

  • The gas monitor must be calibrated and maintained to monitor Methane (CH4), Oxygen (O2), Carbon Monoxide (CO) and Hydrogen Sulfide (H2S).

  • If Hydrogen Sulfide is encountered, please provide measured values and formations to the BLM.

  • Stop work must be followed when any of the levels listed below occur: • Methane - 1000 parts per million (PPM)/5% Lower Explosive Limit (LEL),• Oxygen - saturation below 19.5% or above 23%,• Carbon Monoxide – 50 PPM,• Hydrogen Sulfide - 10 PPM.

  • As a result, the Hydrogen Sulfide area must meet Onshore Order 6 requirements, which includes equipment and personnel/public protection items.

  • Hydrogen Sulfide (H2S) monitors will be installed prior to drilling out the surface shoe.

  • Stop work must be followed when any of the levels listed below occur: • Methane - 1000 parts per million (PPM)/5% Lower Explosive Limit (LEL),• Oxygen - saturation below 19.5% or above 23%,• Carbon Monoxide – 50 PPM,• Hydrogen Sulfide - 10 PPM.The levels stated above are directly from the Occupational Safety and Health Administration (OSHA) and The National Institute for Occupational Safety and Health (NIOSH) and are standard for air monitoring procedures for safety and work environments.

  • B.B., R.E. Lester, and W.J. Mitchell, ‘‘Field Evaluation of Carbon Mon- oxide and Hydrogen Sulfide Continuous Emission Monitors at an Oil Refinery,’’ U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, 27711, EPA– 600/4–82–054, August 1982.


More Definitions of Hydrogen Sulfide

Hydrogen Sulfide. The hydrogen sulfide content shall not exceed one-quarter (1/4) grain per one hundred (100) cubic feet of gas.
Hydrogen Sulfide means the chemical compound containing two atoms of hydrogen and one atom of sulfur.
Hydrogen Sulfide. The hydrogen sulfide content shall not exceed one-quarter (1/4) grain per one hundred (100) cubic feet of gas. Mercaptans: The mercaptan sulphur content shall not exceed one (1) grain per one hundred (100) cubic feet of gas.
Hydrogen Sulfide means a colorless gas at standard conditions having a molecular composition of one sulfur atom and two hydrogen atoms.
Hydrogen Sulfide. Means a colorless gaseous, poisonous compound normally having a characteristic odor of rotten eggs, but at dangerous concentrations the odor is no longer detectable (P.E.L. 10 ppm).

Related to Hydrogen Sulfide

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • CO2 means carbon dioxide.

  • Tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • MMcf means one million cubic feet.

  • Condensate means hydrocarbon liquid separated from natural gas which condenses due to changes in the temperature or pressure and remains liquid at standard conditions.

  • Cannabinoid concentrate means a substance obtained by separating cannabinoids from marijuana by:

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Polystyrene foam means blown polystyrene and expanded and

  • Solids means the nonvolatile portion of the coating that after drying makes up the dry film.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Hydrozone means a portion of the landscaped area having plants with similar water needs and rooting depth. A hydrozone may be irrigated or non-irrigated.

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Perfluoroalkyl and polyfluoroalkyl substances or “PFAS” means a class of fluorinated organic chemicals containing at least one fully fluorinated carbon atom.

  • Barrel means forty-two (42) United States gallons of 231 cubic inches of sixty degrees Fahrenheit (60ºF) and equilibrium vapor pressure.

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.

  • Radionuclide means a radioactive element or a radioactive isotope.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

  • Substrate means the surface onto which a coating is applied or into which a coating is impregnated.

  • Psig means pounds per square inch gauge.