We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Load Testing definition

Load Testing has the meaning set forth in Section 5.12.
Load Testing. For vehicle lifts, your insurance company will require a load test certificate. If you can provide a suitable vehicle or applied load with a weighbridge certificate at the time of installation our engineer will carry out the test and issue a certificate free of charge. Should our engineer or agent have to make a return visit or you require us to provide the certified weights there would be an extra charge. This test is required for MoT authorisation.
Load Testing means testing in accordance with DNV 2.7-1 and any other load testing that may be required following repair to any primary structure members of a container. OEG means OEG Offshore Pty Ltd (ACN 000 000 000) of 0-00 Xxxx Xxxx, Xxxxxx Xxxxx, xx xxx Xxxxx xx Xxxxxxxx; Operator means an employee or contractor of OEG who performs Services for the Customer at a Worksite. PPSR means the Personal Property Securities Register established pursuant to the PPSA; Purchase Money Security Interest has the same meaning as under the PPSA; Schedule means the Schedule at the front of these General Terms and Conditions' Security Interest has the same meaning as in the PPSA. Standards means the Equipment manufacturing design codes and standards including but not limited to: Worksite means the location where an Operator will perform Services for the Customer, as identified in the Schedule.

Examples of Load Testing in a sentence

  • This Dynamic Pile Load Testing is being done to set pile resistance criteria.

  • These services include Managed DNS, Monitoring and Load Testing, and IP Geolocation.

  • The use of the SAP Load Testing Connector is limited to use with the Cloud Service and Customer may not use the SAP Load Testing Connector for any other purpose.

  • SAP shall make available for download by Customer the SAP Load Testing, Agent (the “SAP Load Testing Connector”) which may be used for integration of the Cloud Service with SAP on-premise solutions.

  • HUD’s modification is based in part on the findings of a study conducted by NAHB–RC, ‘‘Comparison of Methods for Wind Uplift Load Testing of Roof Trusses for Manufactured Housing,’’ and the requirements of the National Fire Protection Association (NFPA) consensus process related to uplift testing.

  • Based on results of the Static Load Testing on Test Piles, submit design verification documentation and certification by a Chartered Professional Engineer with membership of Engineers Australia practising in the field of Civil or Structural Engineering (or equivalent), and experienced in pile and bridge design, certifying that the test results verify the adequacy of the design submitted in accordance with Clause 3.

  • Special feet, referred to as Load Testing Feet (LTF), were fitted onto two non- consecutive spokes to replicate the contact pressure of a Primary rover wheel with the reduced mass of the Scout rover.

  • Cox, Ph.D., P.E., A.M.ASCE, University of Texas at AustinPlate Load Testing on Layered Pavement Foundation System to Characterize Mechanistic Parameters, David J.

  • Short Communication: Assessing Estimates of HIV Incidence with a Recent Infection Testing Algorithm That Includes Viral Load Testing and Exposure to Antiretroviral Therapy.

  • The Bi-Directional Static Load Testing shall be performed using the number of load cells and at the locations indicated in the plans.

Related to Load Testing

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Cannabis testing facility means an entity registered by

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Performance Tests means all tests meant to ensure that the Plant(s)/Unit(s) is/are in all respects in accordance with the requirements of the Contract and that the Plant functions properly and smoothly, in all respects as per the approved design parameters, within the permissible tolerances, and satisfies all the stipulated operating parameters, and will include the Guarantee Tests.

  • Genetic test means an analysis of human DNA, RNA, chromosomes, proteins, or metabolites, that detect genotypes, mutations, or chromosomal changes. The term “genetic test” does not mean an analysis of proteins or metabolites that does not detect genotypes, mutations, or chromosomal changes; or an analysis of proteins or metabolites that is directly related to a manifested disease, disorder, or pathological condition that could reasonably be detected by a health care professional with appropriate training and expertise in the field of medicine involved.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Commissioning means the process for determining the need for and for obtaining the supply of healthcare and related services by the Trust within available resources.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.