London Housing Design Guide definition

London Housing Design Guide means the "London Housing Design Guide" published by the London Development Agency in August 2010 (as the same may be amended, varied, updated or replaced from time to time);
London Housing Design Guide means the Mayor of London’s London Housing Design Guide, published in 2010 as amended from time to time;

Examples of London Housing Design Guide in a sentence

  • LP 3A.5, UDP 13.3.4] 3 The Council has recently finalised its Strategic Housing Market Assessment (SHMA), which is available on the Council's website.4 draft London Housing Design Guide, Mayor of London.

  • While the Mayor of London’s draft London Housing Design Guide (July 2009) was released last year.

  • This is also a priority for the Mayor, who is currently consulting on a London Housing Design Guide requiring minimum space standards in order to make new homes provide good living conditions.

  • The Council’s Accessible Homes SPD (2010) seeks communal lifts in blocks of flats over two storeys high, however the more recently published London Housing Design Guide (2010) states that it is 'desirable' that dwellings entered at third floor (fourth storey) are served by at least one wheelchair accessible lift, but that this is not a requirement.

  • Westminster’s Standards for Residential Units 1991 and the London Housing Design Guide 2010 (Interim Edition) contains guidance which will need to be applied to determine room sizes across the development.

  • Phase 3 units have also been designed to London Housing Design Guide standards.To obtain best value for our Client we successfully managed complex cost negotiations through targeted investigations focussed on eliminating significant risk items for a limited cost increase.

  • The room sizes in the proposed dwellinghouse would meet the needs of the intended occupiers and would comply with the previously adopted Environmental Health Standards and the Draft London Housing Design Guide (2009).The internal arrangements of the proposed new dwellings are considered acceptable, and conform to the requirements of Lifetime Homes, as required by saved policy C16 of the Harrow Unitary Development Plan, London Plan policy 3A.5 and the adopted SPD, “Accessible Homes”.

  • Regional planning guidance on housing design has also recently been published for consultation by the London Development Agency (London Housing Design Guide, Draft for consultation, July 2009).

  • On the basis of the information provided, Officers are satisfied that the proposed houses and flats could be designed to comply with the space standards set out in the London Housing Design Guide and the Residential Design Guide SPD.

  • Each aspect of the proposed conversion in the context of saved policies D4 and D5, and the Draft London Housing Design Guide is addressed accordingly below.

Related to London Housing Design Guide

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Design Guidelines means the Fernkloof Estate architectural design guidelines to control all aspects of design and landscaping of any development within the Fernkloof Estate dev elopment, as amended from time to t ime in terms of the constitution of the MPOA or as required by the Council , a copy of the current draft which i s av ailable for inspection at the offices of the Association;

  • Construction Services means either of the following for construction-manager-at-risk, design-build and job-order-contracting project delivery methods:

  • Standard fertility preservation services means procedure based upon current evidence-based standards of care established by the American Society for Reproductive Medicine, the American Society for Clinical Oncology, or other national medical associations that follow current evidence-based standards of care.

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • Construction Service Agreement means either an Interconnection Construction Service Agreement or an Upgrade Construction Service Agreement.

  • Improvement completion assurance means a surety bond, letter of credit,

  • Project Implementation Manual or “PIM” means the manual setting out the measures required for the implementation of the Project, as the same may be amended from time to time, subject to prior approval of the Association;

  • Construction Plant means appliances, machinery with necessary supply to up keep and maintenance of the works or temporary works but dose not include materials or other things intended to form part of the permanent work.

  • Construction Services Agreement (CSA) means the Construction Services Agreement, together with any duly authorized and executed amendments hereto.

  • Vocational rehabilitation services means the unit of vocational rehabilitation established in IC 12-12-1-2(2) as a unit of the rehabilitation services bureau in DDRS.

  • Infrastructure facility means a building; structure; or networks of buildings, structures, pipes, controls, and equipment, or portion thereof, that provide transportation, utilities, public education, or public safety services. Included are government office buildings; public schools; courthouses; jails; prisons; water treatment plants, distribution systems, and pumping stations; wastewater treatment plants, collection systems, and pumping stations; solid waste disposal plants, incinerators, landfills, and related facilities; public roads and streets; highways; public parking facilities; public transportation systems, terminals, and rolling stock; rail, air, and water port structures, terminals, and equipment.

  • Construction Plans means plans, drawings, specifications and related documents, and construction schedules for the construction of the Project, together with all supplements, amendments or corrections, submitted by the Developer and approved by the City in accordance with this Agreement.

  • Procurement Guidelines means the “Guidelines: Procurement under IBRD Loans and XXX Credits” published by the Bank in May 2004 and revised in October, 2006.

  • Tourism destination project means a qualified non-gaming business facility that will be among the most visited privately owned or operated tourism or recreation sites in the State, and which is located within the qualified incentive area and has been determined by the authority to be in an area appropriate for development and in need of economic development incentive assistance, including a non-gaming business within an established Tourism District with a significant impact on the economic viability of that District.

  • Preconstruction services means services and other activities during the design phase.

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Development Consent means the consent granted to the Development Application for the Development and includes all modifications made under section 4.55 of the Act.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Architectural services means those services described as the "practice of architecture," as defined in K.S.A. 74-7003, and amendments thereto.

  • Affordable housing development means a development included in the Housing Element and Fair Share Plan, and includes, but is not limited to, an inclusionary development, a municipal construction project or a 100 percent affordable development.

  • Residential child care facility means a twenty-four-hour residential facility where children live together with or are supervised by adults who are not their parents or relatives;

  • Project Implementation Plan means the detail plan submitted by the Developer with regard to development of Project Facilities and its operation and management thereof in accordance with this Agreement and to be appended as Schedule 9 to this Agreement.

  • service delivery and budget implementation plan means a detailed plan approved by the mayor of a municipality in terms of section 53(1) (c) (ii) for implementing the municipality’s delivery of municipal services and its annual budget.

  • Project designer means any person who designs the following activities with respect to friable ACM in a facility: a response action other than a small-scale short-duration activity, a maintenance activity that disturbs friable ACM other than a small-scale short-duration maintenance activity, or a response action for a major fiber release episode and meets the certification requirements of this regulation.

  • Municipal Separate Storm Sewer System Management Program means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations, and this article and its attendant regulations, using management practices, control techniques, and system, design, and engineering methods, and such other provisions that are appropriate.