Minimum Maintenance Standards definition

Minimum Maintenance Standards means the maintenance, inspection and repair standards that are described in the City of Redmond Stormwater Technical Notebook.
Sample 1Sample 2
Minimum Maintenance Standards means those standards set out in
Sample 1
Minimum Maintenance Standards. Those minimum standards set forth in Exhibit F which the CSD shall be required to meet in its maintenance of the subject public improvements.
Sample 1

Examples of Minimum Maintenance Standards in a sentence

  • All Aircraft shall be operated and maintained by Operator in strict compliance with all Minimum Maintenance Standards, all Governmental Regulations, Operator’s own operations manuals and maintenance manuals and procedures, and all applicable equipment manufacturer’s instructions.

  • Some Levels of Service (LOS) for the Township can be attained through documents developed in the industry and by internally focusing on technical requirements that meet generally expected levels of operation and safety:  Provincial Minimum Maintenance Standards (MMS) for roads, sidewalks, and street lighting Drinking Water Quality Management System (DWQMS) Engineering Standards Manuals Operating Performance Indicators – These are the main activities within each operating budget cost center.

  • Based on local and provincial weather monitoring, paired with the winter patrol required as part of the Minimum Maintenance Standards, the on-shift patroller, lead-hand or supervisor will determine the need for winter maintenance activities to begin.

  • Please refer to Appendix A for the Minimum Maintenance Standards.

  • Staff continually patrol and monitor roadways in accordance with Ontario Regulation 239/02 Minimum Maintenance Standards for Municipal Roads and as always, will maintain them to meet this standard.

  • The Parties hereby agree that the Travelled Portion of the Alternate Truck Route shall be managed/maintained as per Ontario Regulation 239/02: Minimum Maintenance Standards for Municipal Highways.

  • In addition to the financial capacity, and legislative requirements, e.g., Safe Drinking Water Act, the Minimum Maintenance Standards for municipal highways, building codes and the Accessibility for Ontarians with Disability Act, many factors, internal and external, can influence the establishment of LOS and their associated KPIs, both target and actual, including the municipality’s overarching mission as an organization, the current state of its infrastructure, and the municipality’s financial capacity.

  • In case of a safety issue, the work is usually governed by the LOS requirements in accordance with the Ontario Regulations for Minimum Maintenance Standards (MMS).Once a corrective maintenance work order is complete, it is closed.

  • Treatment priorities for the roadways within the Township of North Dundas have been devised to ensure effective, efficient coverage within the timescales defined in the Minimum Maintenance Standards.

  • In addition to the Minimum Maintenance Standards as set out by the Township the following procedures are provided as a guideline for winter maintenance operations.


More Definitions of Minimum Maintenance Standards

Minimum Maintenance Standards means those standards established by Ontario Regulation 239/02, as amended, pursuant to Section 44 of the Municipal Act.
Sample 1

Related to Minimum Maintenance Standards

  • Retail Service and Maintenance Sector Means the service and maintenance of retail facilities which includes financial institutions, retail businesses, schools and hospitals but does not include commercial premises as defined.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Maintenance and Operations Revenue or “M&O Revenue” means (i) those revenues which the District receives from the levy of its annual ad valorem maintenance and operations tax pursuant to Section 45.002 of the TEXAS EDUCATION CODE, or other lawful authority, and Article VII § 3 of the TEXAS CONSTITUTION, plus (ii) all State revenues to which the District is or may be entitled under the applicable provisions of the TEXAS EDUCATION CODE or any other statutory provision as well as any amendment or successor statute to these provisions, as applicable, less

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Support and Maintenance Services means the support and maintenance services described in Section 1 of these Support Terms.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Maintenance Services means SAP’s then-current maintenance and/or support services offered under and described in detail in the applicable SAP PartnerEdge Model.

  • Corrective Maintenance means the maintenance which is required when an item has failed or worn out, to bring it back to working order, which may also include those services necessary to partially restore, renew or strengthen an existing Department facility or system, following damage caused by use or normal wear and tear.

  • Monthly Maintenance Statement shall have the meaning set forth in Clause 19.6;

  • Scheduled Maintenance means any adjustment, repair, removal, disassembly, cleaning, or replacement of components or systems required by the manufacturer which is performed on a periodic basis to prevent part failure or equipment or engine malfunction, or anticipated as necessary to correct an overt indication of malfunction or failure for which periodic maintenance is not appropriate.

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Maintenance Manual shall have the meaning ascribed to it in Clause 10.7; “Maintenance Programme” shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause14.2;

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production.

  • Preventive Maintenance means that maintenance, performed on a scheduled basis by the Contractor, which is designed to keep the Equipment in proper operating condition.

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Routine maintenance means actions performed on a regular or controllable basis or in response to uncontrollable events upon a highway, road, street, or bridge. Routine maintenance includes, but is not limited to, 1 or more of the following:

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under Section 175A of the CAA, as amended.

  • Maintenance Term means the period of time for which Customer has purchased Maintenance Services, as evidenced by the Purchase Order delivered by Customer in connection therewith, together with all renewals effected in accordance with Section 4 of this Agreement.

  • Maintenance Outage means a time period during which Seller plans to reduce the Power Output of the Power Product, in full or in part, in order to facilitate maintenance work on the Generating Facility, other than a Major Overhaul.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Maintenance Window means the weekly maintenance windows for the Cloud Service identified in xxxxx://xxxxxxx.xxx.xxx/maintenance-windows. SAP may update the Maintenance Window from time to time in accordance with the Agreement.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).