We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Reinstatement Specification definition

Reinstatement Specification means the scope of work mutually agreed between Parties so that the Vessel is fitted in every way as an SRV for service under the Charter.
Sample 1Sample 2Sample 3
Reinstatement Specification means the specification annexed hereto or in the event that materials listed in the specification are not available from time to time or appropriate for use then reference to such materials will be substituted by reference to materials of not materially less quality which perform a similar function
Sample 1Sample 2
Reinstatement Specification means the scope of work mutually agreed between Parties so that the Vessel is fitted in every way as an SRV for service under the Charter as further set out in Clause 7.
Sample 1

Examples of Reinstatement Specification in a sentence

  • In case of any accidental damage to the environment or property, Contractor shall undertake restoration to the satisfaction of Company and the owner of the land, water, or property.Temporary stabilization, erosion control and reinstatement shall be installed in the period between opening up the ROW and permanent reinstatement result in erosion or loss of topsoil (specifically sections left open over winter).Reference shall be made to the Reinstatement Specification included in the Contract.

  • A new working group is being formed to commence the review for the next major update of the guideline.• The IPWEA Restoration and Reinstatement Specification for WA, published in 2002, is going to be reviewed and updated during 2019.• Main Roads WA and IPWEA joint technical group and steering committee has been formed to address operational issues.

  • STATUTORY ENVIRONMENTUtility Providers Code of Practice for Western Australia 2010Restoration and Reinstatement Specification for Local Governments 2002 Environmental Protection (Clearing of Native Vegetation) Regulations 2004 EXTERNAL CONSULTATIONConsultation has occurred with an officer from the Western Australian Local Government Association.FINANCIAL IMPLICATIONSThere are no financial implications for this report.

  • Reinstatement will be undertaken as early as practicable and in accordance with the Reinstatement Specification (4-09).

  • Reinstatement works shall comply to City of Kalamunda specifications and IPWEA’s Restoration and Reinstatement Specification for Local Governments in Western Australia.

  • The code then is not possible to be flushed from the hardware-managed instruction cache—all code runs in- definitely, and any interruption results in immediate termination, which erases any existing state (as discussed in Section 4.1).As long as the code fits in the icache, the program executes au- tonomously, without fetching any new instructions from global de- vice memory.

  • M-30AS and M-15AS, which also reach higher values, between 5.2 and 5.7 mW/g, and showed a sharper peak shape.

  • Topsoil stacks along the RoW will be free draining and stored in accordance with the Project Reinstatement Specification (4-05) and will be kept free from disturbance to reduce the risk of physical damage and compaction.


More Definitions of Reinstatement Specification

Reinstatement Specification means the Premises Specification annexed to this Lease as Annexure 2;
Sample 1
Reinstatement Specification means the specification annexed hereto or in the event that materials listed in the specification are not reasonably available from time to time at reasonable cost or are not appropriate for use then reference to such materials will be substituted by reference to materials of no less quality which perform a similar function;
Sample 1
Reinstatement Specification means the specification referred to in the Superior Lease Service Accommodation means any offices, workshops, storerooms, caretaker’s lodges, garaging for vehicles, or other accommodation (whether on the Building or not) provided or used by, or for the Landlord or its agents, for the purpose of administering the Building or in connection with the carrying out or provision of any of the Services;
Sample 1
Reinstatement Specification means the specification attached and marked as such;
Sample 1

Related to Reinstatement Specification

  • IS Specification means the Specification of latest edition with amendments, if any, up to time of receipt of tender by Corporation issued by the Bureau of Indian Standards as referred to in the specifications and / or work orders.

  • Goods Specification any specification for the Goods including any relevant plans or drawings, that is agreed in writing by the Reseller and Voip-Unlimited.

  • Swap Specification means, with respect to any Swap, the Rules or other trading protocols containing specifications for such Swap, as adopted, amended, supplemented or otherwise modified from time to time by BSEF.

  • TENDER SPECIFICATION means “Specific conditions, technical specifications, appendices, site information and drawing pertaining to the work in which the tenderers are required to submit their offer. Individual specification number will be assigned to each tender specification.

  • Class specification means a formal written statement of the class which defines the general character and scope of the duties and responsibilities of positions in the class, lists typical or illustrative examples of work of positions in the class, enumerates the knowledges, skills, and abilities required for successful performance of the work and states required minimum experience and training for positions in the class.

  • The Specification means the Specification annexed to or issued with G.T.C.C. and shall include the schedules & drawings attached thereto as well as all samples and pattern, if any.

  • Service Specification means and includes detailed description, statements to technical data, performance characteristics, and standards (Indian as well as International) as applicable and as specified in the Contract, as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and specifications affecting the work or any additional specification required to be produced by the Bidder to meet the design criteria.

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time. The Contract Specifications appear on the Website.

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Product Specification means the document referred to in:

  • Service Specifications means the following documents, as applicable to the Services under Your order: (a) the Oracle Cloud Hosting and Delivery Policies, the Program Documentation, the Oracle service descriptions, and the Oracle Corporate Security Practices; (b) Oracle’s privacy policies; and (c) any other Oracle documents that are referenced in or incorporated into Your order. The following do not apply to any non-Cloud Oracle service offerings acquired under Your order, such as professional services: the Oracle Cloud Hosting and Delivery Policies and Program Documentation. The following do not apply to any Oracle- provided Software: the Oracle Cloud Hosting and Delivery Policies.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Contract Specific Goals means the subcontracting goals for MBE and WBE participation established for a particular contract.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Brand Name Specification means a specification limited to one or more items by manufacturers’ names or catalogue number.

  • Specification Schedule means the Schedule containing details of the Specification.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Standard Specifications means all applicable legal requirements pertaining to the development of the Property including, but not limited to, Master Subdivision Plan, applicable permits, and construction drawings required for all Infrastructure, including, without limitation, the Town's Unified Development Ordinance, Knightdale's Water Allocation Policy (Ordinance # 13-06- 19-001 and Ordinance # 00-00-00-000) and Standard Specifications and Construction Details Manual. The failure of this Agreement to describe any other permit, condition, or term of restriction applicable to the Property does not relieve Developer of the necessity of complying with the same.

  • Split Specimen means a part of the oral fluid specimen in drug testing that is retained unopened for a confirmation test (if required) or in the event that the employee requests that it be tested following a verified positive test of the primary specimen or a verified Adulterated or Substituted Specimen test result.

  • Product Specifications means the specifications, features and/or terms of any "Contract" (as defined in the LME Rules) listed for trading on the LME, as described in the LME Rules;

  • District specification means the specifications followed by the State Govt. in the area where the work is to be executed.

  • Brand Name or Equal Specification means a specification which uses one or more manufacturer’s names or catalogue numbers to describe the standard of quality, performance, and other characteristics needed to meet District requirements, and which provides for the submission of equivalent products.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Nonconforming sign means a sign or sign structure, other than a nonstandard sign or a sign that is erected and maintained in a business area along a scenic byway prior to the designation as a scenic byway, that satisfies 1 of the following:

  • District Specifications means the specifications followed by the State Government in the area where the work is to be executed.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

Most Referenced Clauses

Most Referenced Definitions