Restoration Shop Visit definition

Restoration Shop Visit or “RSV” shall mean *****.
Sample 1Sample 2Sample 3
Restoration Shop Visit means a shop visit for an Eligible Engine agreed by IAE following an Eligible Engine Removal where (i) the maintenance performed on the Eligible Engine includes the separation of pairs of major mating engine flanges (except for the purpose of shipment without subsequent internal maintenance of the Eligible Engine) or removal of a disk, hub or spool and (ii) for which a Workscope requires the removal, inspection, and repair or replacement of first stage blades installed in the high pressure turbine of such Eligible Engine, as a result of normal engine operation, and which is not initiated as a result of the Failure of such blades rendering them unserviceable and incapable of continued operation without corrective action.
Sample 1Sample 2
Restoration Shop Visit means any visit of an Eligible Engine to the Maintenance Center(s) following an Eligible Removal to accomplish Engine performance restoration sufficient to make the Eligible Engine serviceable in accordance with the then current revision of the MMP for the relevant Engine (or any successor to such MMP), IAE technical publications, Airworthiness Directives, and other IAE and Airworthiness Authority approved maintenance procedures, and which, as a minimum, includes a Level 3 refurbishment of the combustor and high pressure turbine.
Sample 1Sample 2

Examples of Restoration Shop Visit in a sentence

  • If a removed Engine has undergone at least one (1) Performance Restoration Shop Visit for Covered Services, no penalties nor reconciliation will apply.

  • Such Restoration Shop Visit Coverage shall be performed in accordance with Clause 3 of the FHA.

  • The remaining ***** shall be due by Spirit upon completion of the Restoration Shop Visit.

  • Coverage of the SL3 Eligible Engines under the FHA shall include one Restoration Shop Visit as required to meet Spirit’s lease return conditions from the relevant lessor.

  • IAE will use reasonable commercial efforts to provide Spirit with the Enhanced Shop Visit Documentation within forty-five (45) days from the completion of the Restoration Shop Visit for a particular Eligible Engine, but Spirit’s receipt or non-receipt of the Enhanced Shop Visit Documentation shall not affect Spirit’s obligation to pay the corresponding invoices to IAE.

  • Notwithstanding anything in Clause 10.1.2. of the FHA to the contrary, IAE shall invoice Spirit and Spirit shall pay at induction of the Restoration Shop Visit an amount equal to ***** of the sum of the escalated FHA Rate multiplied by (i) the Eligible Engine Flight Hours flown by such Eligible Engine since new, or (ii) if the Eligible Engine has had a Restoration Shop Visit, since its last Restoration Shop Visit.

  • For each Eligible Engine for which Vuela has not provided notice of its election prior to such Engine’s first Restoration Shop Visit, the applicable Period of Cover shall be Period of Cover A.

  • IAE shall communicate the Workscope to the Maintenance Center(s) and cause the Maintenance Center(s) to complete the Restoration Shop Visit.

  • If a removed Engine has undergone at least one Qualified Shop Visit for Covered Services, but not a Performance Restoration Shop Visit, CFM will calculate the total cumulative charges for all Covered Services provided for such removed Engine as if such Services were provided on a Supplemental Services basis and the Supplemental Services pricing had applied (“Supplemental Charges”).

  • IAE shall invoice Spirit at induction of the Restoration Shop Visit an amount equal to the escalated FHA Rate multiplied by the Eligible Engine Flight Hours flown by such Eligible Engine since new or if the Eligible Engine has had a Restoration Shop Visit, since its last Restoration Shop Visit.


More Definitions of Restoration Shop Visit

Restoration Shop Visit or “RSV” means [* * *].
Sample 1
Restoration Shop Visit means any visit of an Eligible Engine to the Maintenance Center(s) following an Eligible Removal to (i) accomplish Engine performance restoration, (ii) meet Lease Return Conditions, or (iii) meet Engine Shop Visit Conditions sufficient to make the Eligible Engine serviceable in accordance with the then current revision of the MMP for the relevant Engine (or any successor to such MMP), IAE technical publications, Airworthiness Directives, and other IAE and Airworthiness Authority approved maintenance procedures, and which, as a minimum, includes a Level 3 refurbishment of the combustor and high pressure turbine.”
Sample 1

Related to Restoration Shop Visit

  • Restoration means the repair and restoration of the Property after a Casualty or Condemnation as nearly as possible to the condition the Property was in immediately prior to such Casualty or Condemnation, with such alterations as may be reasonably approved by Lender.

  • refurbishment means repairing of used electrical and electronic equipment as listed in Schedule I for extending its working life for its originally intended use and selling the same in the market or returning to owner;

  • Construction in Progress means each Property that is either (a) new ground up construction or (b) under renovation in which (i) greater than thirty percent (30%) of the square footage of such Property is unavailable for occupancy due to renovation and (ii) no rents are being paid on such square footage. A Property will cease to be classified as “Construction in Progress” on the earlier to occur of (A) the time that such Property has an Occupancy Rate of greater than eighty percent (80%), or (B) one hundred eighty (180) days after completion of construction or renovation of such Property, as applicable.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Installation Site means the site at which the Product is originally installed.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • CONSTRUCTION EQUIPMENT means all appliances and equipment of whatsoever nature for the use in or for the execution, completion operation or maintenance of the work unless intended to form part of permanent work.

  • Cogeneration facility means a power plant in which the heat or steam is also used for industrial or commercial heating or cooling purposes and that meets Federal Energy Regulatory Commission standards for qualifying facilities under the Public Utility Regulatory Policies Act of 1978 (16

  • Air navigation facility means any facility, other than one owned and operated by the United States, used in, available for use in, or designed for use in aid of air navigation, including any structures, mechanisms, lights, beacons, markers, communicating systems, or other instrumentalities or devices used or useful as an aid, or constituting an advantage or convenience to the safe taking off, navigation, and landing of aircraft, or the safe and efficient operation or maintenance of an airport, and any combination of any or all of such facilities.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • generation facility means a facility for generating electricity or providing ancillary services, other than ancillary services provided by a transmitter or distributor through the operation of a transmission or distribution system, and includes any structures, equipment or other things used for that purpose;

  • Mobility enhancing equipment means equipment, other than durable medical equipment or a motor vehicle or equipment on a motor vehicle normally provided by a motor vehicle manufacturer, dispensed pursuant to a prescription, including repair or replacement parts for that equipment, that is all of the following:

  • Restoration Retainage as used in this Subsection 7.4(b) shall mean an amount equal to 10% of the costs actually incurred for work in place as part of the Restoration, as certified by the Casualty Consultant, until such time as the Casualty Consultant certifies to Lender that Net Proceeds representing 50% of the required Restoration have been disbursed. There shall be no Restoration Retainage with respect to costs actually incurred by Borrower for work in place in completing the last 50% of the required Restoration. The Restoration Retainage shall in no event, and notwithstanding anything to the contrary set forth above in this Subsection 7.4(b), be less than the amount actually held back by Borrower from contractors, subcontractors and materialmen engaged in the Restoration. The Restoration Retainage shall not be released until the Casualty Consultant certifies to Lender that the Restoration has been completed in accordance with the provisions of this Subsection 7.4(b) and that all approvals necessary for the re-occupancy and use of the Property have been obtained from all appropriate governmental and quasi-governmental authorities, and Lender receives evidence satisfactory to Lender that the costs of the Restoration have been paid in full or will be paid in full out of the Restoration Retainage, provided, however, that Lender will release the portion of the Restoration Retainage being held with respect to any contractor, subcontractor or materialman engaged in the Restoration as of the date upon which the Casualty Consultant certifies to Lender that the contractor, subcontractor or materialman has satisfactorily completed all work and has supplied all materials in accordance with the provisions of the contractor’s, subcontractor’s or materialman’s contract, and the contractor, subcontractor or materialman delivers the lien waivers and evidence of payment in full of all sums due to the contractor, subcontractor or materialman as may be reasonably requested by Lender or by the title company insuring the lien of the Security Instrument. If required by Lender, the release of any such portion of the Restoration Retainage shall be approved by the surety company, if any, which has issued a payment or performance bond with respect to the contractor, subcontractor or materialman.

  • fishing gear means any item or piece of equipment that is used in fishing or aquaculture to target, capture or rear marine biological resources or that is floating on the sea surface, and is deployed with the objective of attracting and capturing or of rearing such marine biological resources;

  • Cannabis testing facility means an entity registered by

  • Renovation means altering a facility or one or more facility components in any way, including the stripping or removal of RACM from a facility component. Operations in which load-supporting structural members are wrecked or taken out are demolitions.

  • Rebuilt vehicle means any salvage vehicle which has been rebuilt and inspected for the purpose of registration and title;

  • Transportation equipment means any of the following:

  • Repair means to restore to proper operating condition a tank, pipe, spill prevention equipment, overfill prevention equipment, corrosion protection equipment, release detection equipment or other UST system component that has caused a release of product from the UST system or has failed to function properly.

  • Underground facility means any item which shall be buried or placed below ground for use in connection with the storage or conveyance of water, sewage, electronic, telephone or telegraphic communications, electric energy, oil, gas or other substances, and shall include, but not be limited to pipes, sewers, conduits, cables, valves, lines, wires, manholes, attachments and those portions of poles and their attachments below ground.

  • Repair facility Means any licensed automotive REPAIR FACILITY capable of performing repair services to a COVERED PART, approved by the ADMINISTRATOR, and at which YOU seek to acquire service under this CONTRACT.

  • design pressure means the maximum pressure that a pressure vessel or plant is designed to withstand safety when operating normally;

  • Utility vehicle means a motor vehicle that is (i) designed for off-road use, (ii) powered by an

  • Restoration Plan means all technical and organisational measures necessary for the restoration of the system back to normal state;

  • Production facility means a facility in California at which gasoline or CARBOB is produced. Upon request of a producer, the executive officer may designate, as part of the producer's production facility, a physically separate bulk storage facility which (A) is owned or leased by the producer, and (B) is operated by or at the direction of the producer, and (C) is not used to store or distribute gasoline or CARBOB that is not supplied from the production facility.

  • Transportation Facilities means any physical facility that moves or assist in the movement of people or goods including facilities identified in OAR 660-012-0020 but excluding electricity, sewage, and water systems.