Acceptance Inspection Results Sample Clauses

Acceptance Inspection Results. Within fifteen (15) days after completion of acceptance inspection pursuant to this Article 11 for any Deliverable Item, Purchaser shall notify Contractor in writing of the results of such acceptance inspection. In the event that such acceptance inspection demonstrates conformity of such Deliverable Item to the requirements of the applicable Performance Specification, such Deliverable Item shall be accepted by Purchaser for all purposes hereunder (“Acceptance” with respect to each such Deliverable Item other than the Satellite), and Purchaser’s notice shall so state. In the event that such acceptance inspection discloses any non-conformance of such Deliverable Item to the applicable Performance Specification, Purchaser’s notice shall identify each such non-conformance (with reference to the applicable requirement of the Performance Specification deemed not met), and Contractor shall correct or repair such non-conformance and resubmit such Deliverable Item for a second acceptance inspection in accordance with this Article 11. Such second acceptance inspection shall be conducted by Purchaser to the extent the Purchaser deems relevant and necessary to verify the hardware (including integrated software) conforms to the requirements of the applicable Performance Specification. If Purchaser fails to provide notice within the time specified, Acceptance shall be deemed to have occurred with respect to such Deliverable Item.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
Acceptance Inspection Results. Within [***] days after completion of acceptance inspection pursuant to Article 11.3.1, Purchaser shall notify Contractor in writing of the results of such acceptance inspection. In the event that such acceptance inspection demonstrates conformity of the final DSSs and GCE to the applicable requirements of Exhibits E, F, G and H, such final DSSs and GCE shall be irrevocably accepted by Purchaser for all purposes hereunder (“Acceptance” with respect to the final DSSs and GCE), and Purchaser’s notice shall so state. In the event that such acceptance inspection discloses any non-conformance of the DSSs and/or GCE to the applicable requirements of Exhibits E, G and H, Purchaser’s notice shall identify each such non-conformance (with reference to the specific provision of Exhibits E, G and H deemed not met), and Contractor shall provide to Purchaser a recovery plan with the corresponding schedules in accordance with Exhibits E and F and shall correct or repair such non-conformance and resubmit the final DSSs and/or GCE, as applicable, for a supplemental acceptance inspection in accordance with the provisions of this Article 11.3. Such supplemental acceptance inspection shall be conducted by Purchaser to the extent necessary to verify that the final DSSs and/or GCE, as applicable, conform to the applicable requirements of Exhibits E, G and H. If Purchaser fails to provide either acceptance or non-conformance notice within the time specified, Acceptance shall be deemed to have occurred with respect to the final DSSs and GCE.
Sample 1Sample 2
Acceptance Inspection Results. Within a reasonable time after completion of Acceptance inspection pursuant to this Article 11 for any Deliverable Item, Purchaser shall notify Contractor in writing of the results of such Acceptance inspection. In the event that such Acceptance inspection demonstrates conformity of such Deliverable Item to the applicable requirements of the Performance Specification, such Deliverable Item shall be deemed accepted by the Purchaser for all purposes hereunder ("Acceptance" with respect to each such Deliverable Item other than a Satellite), and Purchaser's notice shall so state. In the event that such Acceptance inspection discloses any non-conformance of such Deliverable Item to the applicable requirements of the Performance Specification, Purchaser's notice shall detail each such non-conformance (with reference to the applicable requirement of the Performance Specification deemed not met), and Contractor shall correct or repair such non-conformance and resubmit such Deliverable Item for Acceptance inspection in accordance with this Article 11 as to each such corrected or repaired element.
Sample 1
Acceptance Inspection Results. Within fifteen (15) days after completion of acceptance inspection pursuant to this Article 10 for any Spare Part, MSV shall notify Contractor in writing of the results of such acceptance inspection. In the event that such acceptance inspection demonstrates conformity of such Spare Part to the requirements of the applicable Performance Specification, such Deliverable Item shall be accepted by MSV for all purposes hereunder (“Acceptance” with respect to a Spare Part), and MSV’s notice shall so state. In the event that such acceptance inspection discloses any non-conformance of such Spare Part to the applicable Performance Specification, MSV’s notice shall identify each such non-conformance (with reference to the applicable requirement of the Performance Specification deemed not met), and Contractor shall correct or repair such non-conformance and resubmit such Spare Part for a second acceptance inspection in accordance with this Article 10. Such second acceptance inspection shall be conducted by MSV to verify the Spare Part conforms to the requirements of the applicable Performance
Sample 1
Acceptance Inspection Results. Within a reasonable time after completion of Acceptance inspection pursuant to this Article 11 for any Deliverable Item, Purchaser shall
Sample 1
Acceptance Inspection Results. Upon completion of acceptance inspection, Purchaser shall promptly notify Contractor of the results thereof in writing. In the event Contractor receives a notice of rejection from Purchaser for any Deliverable Items (other than Satellites), Contractor shall, if it is directed to do so by Purchaser, correct or repair the Deliverable Item and submit it for reinspection by Purchaser after having corrected and/or repaired all defects.
Sample 1
Acceptance Inspection Results. Within ten (10) days after completion of acceptance inspection pursuant to this Article for any Spare Part, MSV shall notify Contractor in writing of the results of such acceptance inspection. In the event that such acceptance inspection demonstrates conformity of such Spare Part to the requirements of the applicable Performance Specification, such Deliverable Item shall be accepted by MSV for all purposes hereunder, and MSV's written notice shall so state. In the event that such acceptance inspection discloses any non-conformance of such Spare Part to the applicable Performance Specification, MSV's notice shall identify each such non-conformance, and Contractor shall correct or repair such non-conformance and resubmit such Spare Part for a second acceptance inspection on the terms established in this Article.
Sample 1
AutoNDA by SimpleDocs
Acceptance Inspection Results. 26 11.5. Acceptance Inspection; Equipment and Facilities.................. 26 11.6.
Sample 1

Related to Acceptance Inspection Results

  • Goods Inspection The Commissioner of DAS, in consultation with the Client Agency, shall determine the manner and prescribe the inspection of all Goods and the tests of all samples submitted to determine whether they comply with all of the specifications in the Contract. If any Goods fail in any way to meet the specifications in the Contract, the Client Agency or the Commissioner of DAS may, in its sole discretion, either reject it and owe nothing or accept it and pay for it on an adjusted price basis, depending on the degree to which the Goods meet the specifications. Any decision pertaining to any such failure or rejection shall be final and binding.

  • Inspection Checklist (check one)

  • Agreement Exceptions/Deviations Explanation If the proposing Vendor desires to deviate form the Vendor Agreement language, all such deviations must be listed on this attribute, with complete and detailed conditions and information included. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any proposal based upon any deviations indicated below. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Vendor Agreement.

  • Acceptance Testing At the time of installation of a LIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

  • Inspection Reports A "full inspection report" comprises a Site Master File (compiled by the manufacturer or by the inspectorate) and a narrative report by the inspectorate. A "detailed report" responds to specific queries about a firm by the other Party.

  • SITE INSPECTION Where a site inspection is required by the Bid Specifications or Project Definition, Bidder shall be required to inspect the site, including environmental or other conditions for pre-existing deficiencies that may affect the installed Product, equipment, or environment or services to be provided and, which may affect Bidder’s ability to properly deliver, install or otherwise provide the required Product. All inquiries regarding such conditions shall be made in writing. Bidder shall be deemed to have knowledge of any deficiencies or conditions which such inspection or inquiry might have disclosed. Bidder must provide a detailed explanation with its Bid if additional work is required under this clause in order to properly complete the delivery and installation of the required Product or provide the requested service.

  • Acceptance Tests 11.1 If the Contract provides acceptance tests for Goods and/or the result of Services after their completion and/or delivery to the Purchaser, the acceptance shall only be considered as definitive when such tests have demonstrated the compliance of the Goods and/or the result of the Services to the requirements in the Contract. 11.2 Where the Contract provides for an acceptance procedure in the presence of both parties, at the successful completion of such procedure, the Purchaser shall issue the Supplier with an acceptance certificate which shall authorise the Supplier to invoice the Purchaser for any payment due on such acceptance. 11.3 The Purchaser shall at its discretion be entitled to issue and acceptancecertificate with reserves. The Supplier shall be obliged to remedy any non-conformities within the period set out in the acceptance certificate. Any payment which would otherwise have been due on acceptance may be withheld by the Purchaser in whole or part until the non- conformities underlying the reserves have been remedied.

  • MOVE-IN INSPECTION Before, at the time of the Tenant accepting possession, or shortly thereafter, the Landlord and Tenant: (check one) ☐ - Agree to inspect the Premises and write any present damages or needed repairs on a move-in checklist. ☐ - Shall not inspect the Premises or complete a move-in checklist.

  • Site Inspections Grantees must ensure by site inspections that facilities on the Project site are being operated and maintained for outdoor recreation for a minimum period of twenty-five (25) years from the Project Completion Date set forth in the Project Completion Certificate. The Project site must be open at reasonable times and must be managed in a safe and attractive manner.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!