BENCH MARKS Sample Clauses

BENCH MARKS. The Contractor shall maintain any site bench marks provided by the Principal Representative and shall establish any additional benchmarks specified by the Architect/Engineer as necessary for the Contractor to layout the Work and ascertain all grades and levels as needed.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
BENCH MARKS. The Design/Build Entity shall maintain any site bench marks provided by the Principal Representative and shall establish any additional benchmarks specified by the Design Build Entity’s Architect/Engineer or Principal Representative as necessary for the Design/Build Entity to layout the Work and ascertain all grades and levels as needed.
Sample 1
BENCH MARKS. 4.1 Permanent Bench Marks (BM) approx. every 5KMs or permanent structures on or off the Right-of -way (ROW) shall be established and described.
Sample 1
BENCH MARKS. Permanent reference bench marks established and maintained by the PSTCL are available on or close to the Project cite Contractor shall arrange to build and maintain at his cost any additional temporary bench marks that may be required by him to lay out lines levels etc., required for the completion of the work covered in the contract. The contractor shall also arrange at his cost for all necessary surveying leveling etc. to be carried out to standardize the co-ordinates and levels of these additional temporary bench marks with reference to the nearest of the permanent bench marks mentioned above. The responsibility for the accuracy of the temporary bench marks for any work carried out based on these bench marks lies entirely with the contractor.
Sample 1
BENCH MARKS. Permanent reference benchmarks established and maintained by the PSTCL are available on or close to the project site. Contractor shall arrange to build and maintain at his cost any additional temporary bench marks that may be required by him to lay out lines levels etc., required for the completion of the work covered in the contract. The contractor shall also arrange at his cost for all necessary surveying, leveling etc. to be carried out to standardize the co-ordinates and levels of these additional temporary bench marks with reference to the nearest of the permanent bench marks mentioned above. The responsibility for the accuracy of the temporary benchmarks for any works carried out based on these benchmarks lies entirely with the contractor.
Sample 1

Related to BENCH MARKS

  • Product Trademarks BMS shall be solely responsible for the selection (including the creation, searching and clearing), registration, maintenance, policing and enforcement of all trademarks developed for use in connection with the marketing, sale or distribution of Products in the Field in the Territory (the “Product Marks”). BMS shall own all Product Marks, and all trademark registrations for said marks.

  • Service Marks BlueCross BlueShield of Western New York is an independent corporation organized under the New York Insurance Law. BlueCross BlueShield of Western New York also operates under licenses with the BlueCross BlueShield Association, which licenses BlueCross BlueShield of Western New York to use the BlueCross BlueShield service marks in a portion of New York State. BlueCross BlueShield of Western New York does not act as an agent of the BlueCross BlueShield Association. BlueCross BlueShield of Western New York is solely responsible for the obligations created under this agreement.

  • Trade Marks Any trade-xxxx adopted or used in association with wares or services which are or may be subject to the provisions of Article 14 shall be owned by the persons who, pursuant to this Article, are the owners of the patent, copyright or other intellectual property in question.

  • Markings If permitted by applicable Law, on or reasonably promptly after the Closing Date, Owner will cause to be affixed to, and maintained in, the cockpit of the Airframe and on each Engine, in each case, in a clearly visible location, a placard of a reasonable size and shape bearing the legend: “Subject to a security interest in favor of Wilmington Trust, National Association, not in its individual capacity but solely as Mortgagee.” Such placards may be removed temporarily, if necessary, in the course of maintenance of the Airframe or Engines. If any such placard is damaged or becomes illegible, Owner shall promptly replace it with a placard complying with the requirements of this Section.

  • Proprietary Marks A. GNC represents with respect to the Proprietary Marks that GNC has the right to use and to license others to use the Proprietary Marks and that the use thereof by Rite Aid in the operation of the Business in accordance with this Agreement will not violate any agreement to which GNC or any licensor to Rite Aid is a party or may be bound and will not infringe upon the rights of any third party. B. With respect to Rite Aid's use of the Proprietary Marks pursuant to this Agreement, Rite Aid agrees that: (1) In the operation of the Business, Rite Aid shall use the Proprietary Marks only in the manner authorized and permitted by this Agreement and such other uniform Proprietary Mark Standards as required from time to time. Any unauthorized use txxxxof shall constitute an infringement of GNC's rights. GNC acknowledges that in the operation and promotion of its Stores and business generally Rite Aid will use its proprietary marks and those of the third parties. (2) Rite Aid shall execute any documents deemed necessary by GNC or its counsel to disclaim any interest in the Proprietary Marks other than the license granted to it in this Agreement. (3) Rite Aid shall not use the Proprietary Marks in its corporate name or any fictitious name. (4) Rite Aid shall not directly or indirectly contest the validity or other ownership of the Proprietary Marks. (5) In the event that litigation involving the Proprietary Marks is instituted or threatened against Rite Aid, Rite Aid shall promptly notify GNC of such litigation. C. Rite Aid expressly understands and acknowledges that: (1) As between the parties hereto, GNC has the exclusive right and interest in and to the Proprietary Marks and the goodwill associated with and symbolized by them and that Rite Aid has only the license granted to it in this Agreement. (2) Rite Aid's use of the Proprietary Marks pursuant to this Agreement does not give Rite Aid any ownership interest or other interest in or to such marks and all goodwill arising from Rite Aid's use of the Proprietary Marks in its operation of the Business shall inure solely and exclusively to GNC's benefit and, upon expiration or termination of this Agreement and the license herein granted, no monetary amount shall be assigned as attributable to any goodwill associated with Rite Aid's use of the System or the Proprietary Marks. (3) Except as may be specifically provided elsewhere in this Agreement, the right and license of the Proprietary Marks granted hereunder to Rite Aid is non-exclusive and GNC thus has and retains the following rights, among others: (a) To grant other licenses for the Proprietary Marks; and (b) To use the Proprietary Marks in connection with selling products and services at locations outside of the Protected Territory to the extent permitted in this Agreement.

  • Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").

  • Artwork Licensee must use the Java Logo(s) only in the exact form of approved camera-ready artwork or electronic artwork received from Oracle or Oracle's designee.

  • License for Txdot Logo Use DocuSign Envelope ID: A2C96816-AFCF-4B6A-9B51-D8FCE6C6223E DocuSign Envelope ID: 81600B2C-53E9-4E39-BA73-002AB2A7A001

  • Marks Unless expressly stated in an Order Form, no right or license, express or implied, is granted in this Agreement for the use of any Red Hat, Red Hat Affiliate, Client or third party trade names, service marks or trademarks, including, without limitation, the distribution of the Software utilizing any Red Hat or Red Hat Affiliate trademarks.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!