Chilled Water Air Conditioning Systems Sample Clauses

Chilled Water Air Conditioning Systems. Package air cooled chilled water units serving fan coils and fresh air-handling units shall be provided and located at the Administration Building. The chilled water system shall provide chilled water to the various HVAC air handling units which in turn ensure a suitable environment for personnel comfort and proper equipment operation during normal container terminal operation. The air conditioning (A.C) system shall be a closed circuit, not exposed to atmosphere, chilled water system supplying cooling water to the various air handling units located at strategic positions levels at the roof of the building to minimise the amount of air ducting required. Makeup water supplied from the Terminal’s service water supply shall be filtered and treated. Makeup water shall be supplied through a control valve operating on the pressure in the system downstream of the valve. This arrangement together with the pressure tank (nitrogen charged) in this part of the system, shall maintain a closed circuit operating under steady pressure and preventing the ingress of oxygen into the circuit. Chilled water pumps and chiller units with common inlet and outlet headers for the Administration Building shall provide the necessary capacity for cooling requirements including standby for maintenance, repair etc. Air cooled water chillers shall be of the fully packaged, factory tested, semi-hermetic type comprising not less than the following items: - Weatherproof enclosure and mounting frame. - Not less than two semi-hermetic refrigeration compressors. - Air cooled condenser. - Shell and tube type evaporator. - Pre-wired controls and electrical starting equipment. - Not less than two independent refrigeration circuits. The unit casing shall be constructed from zinc coated or galvanised mild steel of not less than 2.5mm thickness formed on a channel section steel framework. All exterior surfaces shall be chemically treated against corrosion and given an epoxy primer coating finished with baked enamel. Fans shall be of the axial flow type with contoured blades designed to deliver high air volumes at low tip speeds and with a minimum of noise and blade tip recirculation. Fans shall be complete with ground, polished and protected steel shafts; weatherproof permanently lubricated bearings and wire mesh guards. The compressors shall be multi-cylinder reciprocating type having cylinder unloading capacity control arranged to give an overall unit minimum capacity of not greater than 30% of f...
Sample 1

Related to Chilled Water Air Conditioning Systems

  • Air Conditioning If the Apartment has been provided with a ledge for split air conditioning system with suitable provision for keeping outdoor units of the AC system and also the route to take refrigerant piping, which the Allottee shall have to strictly follow while installing AC units

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit E during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep all of the operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System.

  • Heating and Air Conditioning Xxxxxx agrees to furnish to Lessee heating and air conditioning equipment and maintain same in satisfactory operating condition at all times for the Premises during the term of the Lease at the expense of Lessor. Xxxxxx agrees that thermostats in the Premises will be set to maintain an average zone temperature of 75 degrees Fahrenheit during the heating and cooling seasons.

  • Heating The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • SPRINKLER SYSTEM If there now is or shall be installed in the Building a "sprinkler system", and such system or any of its appliances shall be damaged or injured or not in proper working order by reason of any act or omission of Tenant, Tenant's agents, servants, employees, licensees or visitors, Tenant shall forthwith restore the same to good working condition at its own expense; and if the New York Board of Fire Underwriters or the New York Fire Insurance Rating Organization or any bureau, department or official of the state or city government, shall require or recommend that any changes, modifications, alterations or additional sprinkler heads or other equipment be made or supplied by reason of Tenant's business, or the location of the partitions, trade fixtures, or other contents of the Premises, Tenant shall, at Tenant's expense, promptly make and supply such changes, modifications, alterations, additional sprinkler heads or other equipment.

  • Building Systems The term “Building Systems” shall mean collectively the mechanical, electrical, plumbing, sanitary, sprinkler, heating, ventilation and air conditioning, security, life safety, elevator and other service systems or facilities of the Building and the finished ceiling and Building standard lighting fixtures in the Leased Premises, that are excluding any Premises Fixtures.

  • Installation Services The Bitstream 2a Service includes a Standard Install as set out below (in each case to the extent that the relevant provisioning works are not already complete for the relevant Service Order).1

  • HVAC Heating, ventilating and air conditioning.

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)