Completion and Defects Liability Period Sample Clauses

Completion and Defects Liability Period. 16.1 When the Works have reached Practical Completion the Employer shall give the Contractor a written statement to that effect, which statement shall not be unreasonably delayed or withheld, the Practical Completion of the Works shall be deemed for all purposes of this Contract to have taken place on the day named in such statement. Should CERPROBE CORPORATION ("the Employer") form a registered in Malaysia subsidiary this agreement shall automatically be assigned to said Malaysian registered subsidiary who thereafter shall be the Employer. 16.2 Any Defects, shrinkages or other faults which shall appear within the Defects Liability Period and which are due to failure of the Contractor to comply with his obligations under this Contract shall be specified by instruction of the Employer in a Schedule of Defects which he shall deliver to the Contractor as an instruction of the Employer not later than 14 days after the expiration of the said Defects Liability Period, and within a reasonable time after receipt of such Schedule of defects, shrinkages and other faults therein specified shall be made good by the Contractor at no cost to the Employer unless the Employer shall otherwise instruct; and if the Employer does so otherwise instruct then an appropriate deduction in
AutoNDA by SimpleDocs
Completion and Defects Liability Period 

Related to Completion and Defects Liability Period

  • Defects Liability Period (i) The Contractor shall be responsible for all the Defects and deficiencies, except usual wear and tear in the Project Highway or any Section thereof, till the expiry of a period of commencing from the date of Completion Certificate (the “Defects Liability Period”) as specified below: (a) 5 (five) years from the date of completion in case of a road being constructed with flexible pavement; (b) 10 (ten) years from the date of completion in case of road being constructed with rigid pavement; (c) 10 (ten) years from the date of completion in case of road being constructed with flexible pavement using perpetual design; (d) 10 (ten) years from the date of completion in case of all stand-alone structures, e.

  • Defects Liability 9.1 In this Contract, and subject to Clause 9.2, a defect shall mean any non-conformity of the Supplies with the express terms of this Contract resulting from circumstances existing in the Supplies at the time of the transfer of risk to the Customer (“Defects”). 9.2 In particular, the following shall not be Defects: a) normal wear and tear, non-conformity resulting from excessive strain, b) non-conformity resulting from faulty or negligent handling; non-compliance with instructions or recommendations in operation or maintenance manuals and other documents; c) installation, erection, modification, commissioning, or pre-commissioning, in each case not carried out by Xxxxxxx, d) non-reproducible software errors, e) defects which do not significantly impair the use of the respective Supplies. 9.3 The Customer shall immediately inspect the Supplies upon delivery and shall notify Flender in writing of any Defects without undue delay. The Customer’s claims in respect of defects shall be excluded for any apparent defects if the Customer has failed to do so. Upon such written notification, Flender shall, at its option, remedy a Defect by repair, replacement, or re-performance. Flender shall be given a reasonable period of time and opportunity to remedy the Defect. For this purpose, the Customer shall xxxxx Xxxxxxx working access to the non- conforming Supplies, shall undertake any necessary dis-assembly and re-assembly, and shall provide access to operation and maintenance data, all at no charge to Flender. Upon Flender’s request, the Customer shall ensure that the title to the replaced parts/items shall pass to Flender. 9.4 Unless otherwise agreed, the defects liability period for any part of the Supplies is 12 months. It starts at the date of transfer of risk. For replaced or repaired parts of the Supplies, the defects liability period is 6 months from the date of replacement or repair, if the original defects liability period for the Supplies expires earlier. In any event, the defects liability period shall end no later than 24 months from the beginning of the original defects liability period. 9.5 If software is defective, Flender shall only be obliged to provide the Customer with an updated version of the software in which the Defect has been remedied when such updated version is reasonably available from Flender or, if Flender is only licensee, from Flender’s licensor. If the software has been modified or individually developed by Flender, Flender shall in addition provide the Customer with a workaround or other interim corrective solution until the provision of an updated version of the software, if such workaround or interim solution is feasible at reasonable expense and if otherwise the Customer’s business operations would be substantially impeded. 9.6 If Flender carries out remedial work and it is ultimately not established that there was a Defect, the Customer shall pay Flender for such remedial work including error diagnosis. 9.7 Any other liability of Flender and rights and remedies of the Customer in case of defects of the Supplies, other than those expressly stipulated in this Clause 9 or , in case Flender failed at least three times in remedying the defect, in Clause 15.2b) shall be excluded. All warranties, representations, conditions, and all other terms of any kind whatsoever implied by statute or law are, to the fullest extent permitted by applicable law, excluded from this Contract.

  • Our Liability for Failure to Complete Transactions If we do not properly complete a transaction from your Card on time or in the correct amount according to our Agreement with you, we will be liable for your losses or damages. However, there are some exceptions. We will not be liable, for instance:

  • Seller’s Indemnification Obligations Seller shall, on the date of Closing, agree (and, upon delivery to Purchaser of the Assignments, shall be deemed to have agreed), subject to the limitations and procedures contained in this Article 9, following the Closing, to indemnify and hold Purchaser, its Affiliates and its and their respective successors and permitted assigns and all of their respective stockholders, partners, members, managers, directors, officer, employees, agents and representatives (collectively, the “Purchaser Indemnitees”) harmless from and against any and all claims, obligations, actions, liabilities, damages or expenses (collectively, “Purchaser’s Losses”) incurred, suffered, paid by or resulting to any of the Purchaser Indemnitees and which results from, arises out of or in connection with, is based upon, or exists by reason of: (a) any breach of any representation, warranty, covenant or agreement of Seller contained in this Agreement (in each case without regard to materiality or any qualification as to Material Adverse Effect), (b) Seller’s non-compliance with Applicable Laws or agreements in respect of the Properties prior to the Closing, (c) all Property Costs incurred prior to the Effective Date (including with regard to joint interest xxxxxxxx by Seller and any participating party’s payments in respect thereof), (d) all costs and expenses incurred by Purchaser associated with the plugging and abandoning of each Abandoned Well pursuant to Section 7.13 or (e) the Excluded Assets; REGARDLESS OF THE NEGLIGENCE, STRICT LIABILITY OR OTHER FAULT OR RESPONSIBILITY OF PURCHASER, ANY OTHER PURCHASER INDEMNITEE, SELLER OR ANY OTHER PERSON. Notwithstanding any other provision of this Agreement, (i) the maximum liability of Seller under the indemnity provisions of Article 9 or under any other provisions of this Agreement, in either case for a breach of any representation or warranty other than the Seller Transaction Representations and Section 4.1(i), shall not exceed ten percent (10%) of the Purchase Price and (ii) Seller shall have no liability under the indemnity provisions of this Section 9.5 by reason of any breach of any representation or warranty (other than the Seller Transaction Representations and Section 4.1(i)) until and unless the aggregate amount of the liability for all Purchaser Losses associated therewith exceeds ONE MILLION Dollars ($1,000,000), in which event Seller shall be liable for the amount of all Purchaser Losses, but in no event to exceed ten percent (10%) of the Purchase Price. Seller agrees that any amounts owing to Purchaser under this Agreement may be set off against and withheld from any amounts owing to Seller in respect of its interest under the Farmout Agreement.

  • Waiver of Closing Conditions Upon the occurrence of the Closing, any condition set forth in this Article V that was not satisfied as of the Closing shall be deemed to have been waived as of the Closing for the applicable Transferred Asset.

  • LIABILITY FOR FAILURE TO COMPLETE TRANSACTIONS If We do not

  • General Liability and Property Damage With respect to all operations performed under this Agreement, the Party shall carry general liability insurance having all major divisions of coverage including, but not limited to:

  • LIMITATION OF CONTRACTOR’S LIABILITY Except as specified in any separate writing between the Contractor and an END USER, Contractor’s total liability under this Agreement, whether for breach of contract, warranty, negligence, strict liability, in tort or otherwise, but excluding its obligation to indemnify H-GAC, is limited to the price of the particular products/services sold hereunder, and Contractor agrees either to refund the purchase price or to repair or replace product(s) that are not as warranted. In no event will Contractor be liable for any loss of use, loss of time, inconvenience, commercial loss, loss of profits or savings or other incidental, special or consequential damages to the full extent such use may be disclaimed by law. Contractor understands and agrees that it shall be liable to repay and shall repay upon demand to END USER any amounts determined by H-GAC, its independent auditors, or any agency of State or Federal government to have been paid in violation of the terms of this Agreement.

  • DEFECT LIABILITY It is agreed that in case any structural defect or any other defect in workmanship, quality or provision of services or any other obligations of the Promoter as per the agreement for sale relating to such development is brought to the notice of the Promoter within a period of 5 (five) years by the Allottee from the date of handing over possession, it shall be the duty of the Promoter to rectify such defects without further charge, within 30 (thirty) days, and in the event of Promoter's failure to rectify such defects within such time, the aggrieved Allottees shall be entitled to receive appropriate compensation in the manner as provided under the Act.

  • Waiver of Breach; Specific Performance The waiver of a breach of any provision of this Agreement shall not operate or be construed as a waiver of any other breach. Each of the parties to this Agreement will be entitled to enforce this Agreement, specifically, to recover damages by reason of any breach of this Agreement, and to exercise all other rights existing in that party’s favor. The parties hereto agree and acknowledge that money damages may not be an adequate remedy for any breach of the provisions of this Agreement and that any party may apply to any court of law or equity of competent jurisdiction for specific performance or injunctive relief to enforce or prevent any violations of the provisions of this Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!