Company SEC Documents (i) The Company has timely filed all reports, schedules, forms, statements and other documents (including exhibits and other information incorporated therein) with the SEC required to be filed by the Company since January 1, 2004 (such documents, together with any documents filed during such period by the Company to the SEC on a voluntary basis on Current Reports on Form 8-K, the “Company SEC Documents”). As of their respective filing dates, the Company SEC Documents complied in all material respects with, to the extent in effect at the time of filing, the requirements of the U.S. Securities Act of 1933, as amended (including the rules and regulations promulgated thereunder, the “Securities Act”), the Exchange Act and the Xxxxxxxx-Xxxxx Act of 2002 (including the rules and regulations promulgated thereunder, “SOX”) applicable to such Company SEC Documents. Except to the extent that information contained in any Company SEC Document has been revised, amended, supplemented or superseded by a later-filed Company SEC Document that has been filed prior to the date of this Agreement, as of their respective filing dates, none of the Company SEC Documents contains any untrue statement of a material fact or omits to state any material fact required to be stated therein or necessary in order to make the statements therein, in light of the circumstances under which they were made, not misleading, which individually or in the aggregate would require an amendment, supplement or correction to such Company SEC Documents. Each of the financial statements (including the related notes) of the Company included in the Company SEC Documents complied at the time it was filed as to form in all material respects with the applicable accounting requirements and the published rules and regulations of the SEC with respect thereto in effect at the time of such filing, had been prepared in accordance with generally accepted accounting principles in the United States (“GAAP”) (except, in the case of unaudited statements, as permitted by the rules and regulations of the SEC) applied on a consistent basis during the periods involved (except as may be indicated in the notes thereto) and fairly presented in all material respects the consolidated financial position of the Company and its consolidated Subsidiaries as of the dates thereof and the consolidated results of their operations and cash flows for the periods then ended (subject, in the case of unaudited statements, to normal year-end audit adjustments). None of the Subsidiaries of the Company are, or have at any time since January 1, 2004 been, subject to the reporting requirements of Section 13(a) or 15(d) of the Exchange Act.
(ii) Each of the principal executive officer of the Company and the principal financial officer of the Company (or each former principal executive officer of the Company and each former principal financial officer of the Company, as applicable) has made all certifications required by Rule 13a-14 or 15d-14 under the Exchange Act and Sections 302 and 906 of SOX with respect to the Company SEC Documents, and the statements contained in such certifications are true and accurate. For purposes of this Agreement, “principal executive officer” and “principal financial officer” shall have the meanings given to such terms in SOX. Neither the Company nor any of its Subsidiaries has outstanding (nor has arranged or modified since the enactment of SOX) any “extensions of credit” (within the meaning of Section 402 of SOX ) to directors or executive officers (as defined in Rule 3b-7 under the Exchange Act) of the Company or any of its Subsidiaries.
(iii) The Company maintains a system of internal accounting controls sufficient to provide reasonable assurance that (A) transactions are executed in accordance with management’s general or specific authorizations; (B) access to assets is permitted only in accordance with management’s general or specific authorization; and (C) the recorded accountability for assets is compared with the existing assets at reasonable intervals and appropriate action is taken with respect to any differences.
(iv) The Company’s “disclosure controls and procedures” (as defined in Rules 13a-15(e) and 15d-15(e) of the Exchange Act) are reasonably designed to ensure that all information (both financial and non-financial) required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC, and that all such information is accumulated and communicated to the Company’s management as appropriate to allow timely decisions regarding required disclosure and to make the certifications of the chief executive officer and chief financial officer of the Company required under the Exchange Act with respect to such reports. The Company has disclosed, based on its most recent evaluation of such disclosure controls and procedures prior to the date of this Agreement, to the Company’s auditors and the audit committee of the Board of Directors of the Company and on 3.01(e)(iv) of the Company Disclosure Schedule (A) any significant deficiencies and material weaknesses in the design or operation of internal controls over financial reporting that are reasonably likely to adversely affect in any material respect the Company’s ability to record, process, summarize and report financial information and (B) any fraud, whether or not material, that involves management or other employees who have a significant role in the Company’s internal controls over financial reporting.
(v) Since December 31, 2005 through the date of this Agreement, (i) neither the Company nor any of its Subsidiaries nor, to the Knowledge of the Company, any director, officer, employee, auditor, accountant or representative of the Company or any of its Subsidiaries has received or otherwise had or obtained knowledge of any material complaint, allegation, assertion or claim, whether written or oral, regarding the accounting or auditing practices, procedures, methodologies or methods of the Company or any of its Subsidiaries or their respective internal accounting controls, including any material complaint, allegation, assertion or claim that the Company or any of its Subsidiaries has engaged in questionable accounting or auditing practices, and (ii) no attorney representing the Company or any of its Subsidiaries, whether or not employed by the Company or any of its Subsidiaries, has reported evidence of a material violation of securities Laws, breach of fiduciary duty or similar violation by the Company or any of its officers, directors, employees or agents to the Board of Directors of the Company or any committee thereof or to any director or officer of the Company.
Freedom to Trade in Company Securities The Rights Agent and any stockholder, director, officer or employee of the Rights Agent may buy, sell or deal in any of the Rights or other securities of the Company or become pecuniarily interested in any transaction in which the Company may be interested, or contract with or lend money to the Company or otherwise act as fully and freely as though it were not Rights Agent under this Agreement. Nothing herein shall preclude the Rights Agent from acting in any other capacity for the Company or for any other legal entity.
Closing of Company Transfer Books At the Effective Time, the stock transfer books of the Company shall be closed and no transfer of shares of Company Common Stock shall thereafter be made on the records of the Company. If, after the Effective Time, Certificates are presented to the Surviving Corporation, the Exchange Agent or the Parent, such Certificates shall be canceled and exchanged as provided in this Article I.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Commission Shares other than Omnibus Shares (a) Commission Shares that are not Omnibus Shares (“Non-Omnibus Commission Shares”) attributed to the Distributor shall be those Non-Omnibus Commission Shares (i) the Date of Original Issuance of which occurred on or after the Inception Date of the applicable Fund and on or prior to the date the Distributor ceased to be exclusive distributor of Class C shares of the Fund and (ii) that are subject to a CDSC (without regard to any conditions for waivers thereof).
(b) Non-Omnibus Commission Shares attributable to each Successor Distributor shall be those Non-Omnibus Commission Shares (i) the Date of Original Issuance of which occurs after the date such Successor Distributor became the exclusive distributor of Class C shares of the Fund and on or prior to the date such Successor Distributor ceased to be the exclusive distributor of Class C shares of the Fund and (ii) that are subject to a CDSC (without regard to any conditions for waivers thereof).
Intercompany Transactions 72 Section 9.13
Sale and Transfer of Shares Closing Subject to the terms and conditions of this Agreement, at the Closing, the following will occur:
i. the Company will sell and transfer the Purchase Shares to GSAI and the Shareholders;
ii. Bristlecone will deliver 4,500,000 common shares to the Company which shall be cancelled and returned to the treasury of the Company; iii Xxxxxxxxx will deliver 3,500,000 common shares to the Company which shall be cancelled and returned to the treasury of the Company;
iv. GSAI will transfer 100% of the outstanding shares of ARCIS (the “ARCIS Shares”) to the Company.
v. the Shareholders will transfer 100% of the outstanding shares of GCED (the “GCED Shares”) to the Company;
vi. the Company shall deliver the 13,200,000 Purchase Shares issued in the amounts and to the persons set forth in Exhibit C hereto;
vii. the Officers and Directors of the Company shall appoint the directors designated by GSAI and resign; and the newly appointed Directors of the Company who shall serve until their successors have been duly elected or appointed and qualified or until their earlier death, resignation or removal in accordance with the Charter and the By-Laws, shall appoint the new officers of the Company.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Merger Closing (a) The Merger shall be consummated (the "Closing") at 10:00 a.m. (Eastern time) on a date to be specified by the parties, which shall be no later than the second (2nd) Business Day after satisfaction or (to the extent permitted by applicable Law) waiver of the conditions set forth in Article 7 (other than any such conditions that by their nature cannot be satisfied until the Closing Date, which shall be required to be so satisfied or (to the extent permitted by applicable Law) waived on the Closing Date), at the offices of Xxxx, Weiss, Rifkind, Xxxxxxx & Xxxxxxxx LLP, 1285 Avenue of the Americas, New York, New York, unless another time, date or place is agreed to in writing by the parties hereto (such date upon which the Closing occurs, the "Closing Date").
(b) At the Closing, the parties hereto shall cause the Merger to be consummated by causing to be filed with the Secretary of State of the State of Delaware a certificate of merger or a certificate of ownership and merger, as the case may be (in any such case, the "Certificate of Merger"), in such form as required by, and executed in accordance with, the relevant provisions of the DGCL and shall make all other filings or recordings required under the DGCL. The Merger shall become effective at such time as the Certificate of Merger is duly filed with the Secretary of State of the State of Delaware, or at such later time as Parent and the Company shall agree and specify in the Certificate of Merger (the time the Merger becomes effective being the "Effective Time").
(c) Notwithstanding anything herein to the contrary, in the event that Parent, Merger Sub and their respective Subsidiaries collectively hold or acquire at least 90% of the outstanding shares of Company Common Stock after giving effect to the closing of the Offer and, if applicable, the purchase by Merger Sub of the Top-Up Shares, Parent and the Company hereby agree to take all necessary and appropriate action to cause the Merger to become effective, without a meeting of the holders of shares of Company Common Stock, in accordance with Section 253 of the DGCL as promptly as practicable.
Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the end-user’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the end-user and the cross-box.
