EASA SPECIAL CONDITIONS APPLICABLE TO U.S.-BASED REPAIR STATIONS Sample Clauses

EASA SPECIAL CONDITIONS APPLICABLE TO U.S.-BASED REPAIR STATIONS. 1.1. To be approved in accordance with EASA Part-145, pursuant to the terms of this Annex, the repair station shall comply with all of the following Special Conditions. 1.1.1. The repair station shall submit an application in a form and a manner acceptable to EASA. (a) The application for both initial and continuation of the EASA approval shall include a statement demonstrating that the EASA certificate and/or rating is necessary for maintaining or altering aeronautical products registered or designed in an EU Member State or parts fitted thereon. (b) The repair station shall provide a supplement to its Repair Station Manual (RSM) that is verified and accepted by the FAA on behalf of EASA. All revisions to the supplement must be accepted by the FAA. The supplement shall include the following: (i) the supplement must contain a statement by the accountable manager of the repair station, as defined in the current version of EASA Part 145 which commits the repair station to compliance with this Annex and the special conditions as listed; (ii) detailed procedures for the operation of an independent quality monitoring system including oversight of all multiple facilities and line stations within the territory of the United States; (iii) procedures for the release or approval for return to service that meet the requirements of EASA Part-145 for aircraft and the use of the FAA Form 8130 3 for aircraft components, and any other information required by the owner or operator as appropriate; (iv) for airframe/aircraft rated facilities, procedures to ensure that the certificate of airworthiness and the Airworthiness Review Certificate are valid prior to the issue of a release to service document; (v) procedures to ensure that repairs and modifications as defined by EASA requirements are accomplished in accordance with data approved by EASA; (vi) a procedure for the repair station to ensure that the FAA-approved initial and recurrent training programme and any revision thereto include human factors training; (vii) procedures for reporting un-airworthy conditions as required by EASA Part-145 on civil aeronautical products to the EASA, aircraft design organisation, and the customer or operator; (viii) procedures to ensure completeness of, and compliance with, the customer or operator work order or contract including notified EASA airworthiness directives and other notified mandatory instructions; (ix) procedures in place to ensure that contractors meet the terms of these ...
Sample 1
AutoNDA by SimpleDocs

Related to EASA SPECIAL CONDITIONS APPLICABLE TO U.S.-BASED REPAIR STATIONS

  • General Conditions Applicable to Option to Build If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, (1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO; (2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO; (5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same; (6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1

  • General Conditions Applicable to Insurance All policies of insurance required by this section shall comply with the following requirements:

  • – OTHER SPECIAL CONDITIONS I. 12.1 Exchange rate applicable for the conversion of currencies into euro Payments shall be made by the Commission in euro. The co-ordinator shall submit the payment requests in accordance with article I.5.3, including the underlying financial statements, in euro. By way of derogation from article II.16.1, any conversion of actual costs into euro shall be made by the beneficiary at the monthly accounting rate established by the Commission and published on its website applicable on the day when the cost was incurred.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • General Conditions (i) Each party will make each payment or delivery specified in each Confirmation to be made by it, subject to the other provisions of this Agreement. (ii) Payments under this Agreement will be made on the due date for value on that date in the place of the account specified in the relevant Confirmation or otherwise pursuant to this Agreement, in freely transferable funds and in the manner customary for payments in the required currency. Where settlement is by delivery (that is, other than by payment), such delivery will be made for receipt on the due date in the manner customary for the relevant obligation unless otherwise specified in the relevant Confirmation or elsewhere in this Agreement. (iii) Each obligation of each party under Section 2(a)(i) is subject to (1) the condition precedent that no Event of Default or Potential Event of Default with respect to the other party has occurred and is continuing, (2) the condition precedent that no Early Termination Date in respect of the relevant Transaction has occurred or been effectively designated and (3) each other applicable condition precedent specified in this Agreement.

  • SPECIAL CONDITIONS A submitted appeal must;

  • Early Construction of Base Case Facilities Developer may request Connecting Transmission Owner to construct, and Connecting Transmission Owner shall construct, subject to a binding cost allocation agreement reached in accordance with Attachment S to the ISO OATT, including Section 25.8.7 thereof, using Reasonable Efforts to accommodate Developer’s In-Service Date, all or any portion of any System Upgrade Facilities or System Deliverability Upgrades required for Developer to be interconnected to the New York State Transmission System which are included in the Base Case of the Class Year Study for the Developer, and which also are required to be constructed for another Developer, but where such construction is not scheduled to be completed in time to achieve Developer’s In-Service Date.

  • Conditions Applicable to All Sale and Purchase Transactions (a) Any transaction effected under this Article X or in connection with the acquisition of additional Collateral Loans shall be conducted on an arm’s length basis and, if effected with a Person that is an Affiliate of the Collateral Manager (or with an account or portfolio for which the Collateral Manager or any of its Affiliates serves as investment adviser), shall be on terms no less favorable to the Borrower than would be the case if such Person were not such an Affiliate or as otherwise expressly permitted in this Agreement. (b) Upon each contribution of one or more Collateral Loans from the BDC to the Borrower and upon each acquisition by the Borrower of a Collateral Loan from the BDC, the Collateral Manager or any of their respective Affiliates (each such contribution or other such acquisition, an “Affiliate Loan Acquisition”) (i) all of the Borrower’s right, title and interest to such Collateral Loan shall be subject to the Lien granted to the Collateral Agent pursuant to this Agreement and (ii) such Collateral Loan shall be Delivered to the Collateral Agent (or the Custodian on its behalf, as applicable), provided, that, notwithstanding the foregoing, the Related Documents and Loan Checklist may be delivered within ten (10) Business Days of the contribution or acquisition. (c) The Aggregate Principal Balance of the Collateral Loan(s) which are the subject of any sale to an Affiliate of the Borrower under this Article X or substitution pursuant to Section 10.03, together with the sum of the Aggregate Principal Balance of all Collateral Loans sold to Affiliates or substituted in the 12 month period preceding the proposed date of sale or substitution (or such lesser number of months as shall have elapsed since the Closing Date) shall not exceed 20% of the Net Purchased Loan Balance; provided that, the sum of the Aggregate Principal Balance of all Defaulted Collateral Loans or Ineligible Collateral Loans sold to Affiliates or substituted in the 12 month period preceding the proposed date of sale or substitution (or such lesser number of months as shall have elapsed since the Closing Date) shall not exceed 10% of the Net Purchased Loan Balance. For the avoidance of doubt, the foregoing limitations shall not apply (i) to Warranty Loans (as defined in the Purchase and Sale Agreement) or (ii) where Collateral Loans are sold by the Borrower in connection with a Permitted Securitization.

  • Conditions Applicable to Insurance All policies of insurance required by this solicitation or any Contract resulting from this solicitation must meet the following requirements:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!