End of the Licence Sample Clauses

End of the Licence. 18.1. Unless terminated earlier, the Licence shall end upon the expiry of the Licence Period. 18.2. At the end of the Licence Period, the Student shall immediately vacate their Room and remove all personal effects and belongings. Failure to do so may result in the Student incurring overnight charges at summer business rates until all such personal effects and belongings are removed. 18.3. Students are required to complete the Check-out process with the Manager. If a Student fails to do this, they will be subject to an additional administrative fee. 18.4. The Room should be handed back in the same condition as it was given to the Student (fair wear and tear excluded). 18.5. Any personal effects or belongings, including bicycles, left in or on the Room or in or on the premises after the expiry of the Licence Period may be disposed of by XXX at its discretion without incurring any liability to the Student. 18.6. Students must ensure all Rooms are left thoroughly cleaned and ready for the next occupants. Failure to do so will result in cleaning fines being levied against Students and in the case of shared living spaces the cleaning fines will be divided between all Students on that floor of the residence, irrespective of when they vacated their Room.
AutoNDA by SimpleDocs
End of the Licence. At the end of the Licence Period to remove the Licensee’s belongings from the Property and leave the Room clean and tidy so that it is ready for immediate re-occupation. To hand over to the Licensor on the last day of the Licence Period all keys to the Property and if the Licensee fails to comply with this sub-clause the Licensor shall have the right to change all security locks to the Property at the Licensee’s expense. If the Licensee’s belongings shall not have been removed from the Property at the end of the Licence Period: if the remaining items prevent the Licensor from re-letting the Room, to pay the Licensor damages at the rate equal to the licence fee then payable for the Property until the Licensee shall have removed all such items; and if the Licensee fails to remove the goods in a reasonable time, the Licensor will be entitled to remove the goods and the Licensee agrees to indemnify the Licensor for all reasonable expenses incurred in the removal and/or storage or disposal of the goods. To indemnify the Licensor against all reasonable costs and expenses arising from any breach of this Agreement by the Licensee. To indemnify the Licensor in respect of any costs incurred by the Licensor in enforcing the terms of this Agreement against the Licensee.

Related to End of the Licence

  • License; Use Upon delivery to an Authorized Person or a person reasonably believed by Custodian to be an Authorized Person of the Fund of software enabling the Fund to obtain access to the System (the “Software”), Custodian grants to the Fund a personal, nontransferable and nonexclusive license to use the Software solely for the purpose of transmitting Written Instructions, receiving reports, making inquiries or otherwise communicating with Custodian in connection with the Account(s). The Fund shall use the Software solely for its own internal and proper business purposes and not in the operation of a service bureau. Except as set forth herein, no license or right of any kind is granted to the Fund with respect to the Software. The Fund acknowledges that Custodian and its suppliers retain and have title and exclusive proprietary rights to the Software, including any trade secrets or other ideas, concepts, know-how, methodologies, or information incorporated therein and the exclusive rights to any copyrights, trademarks and patents (including registrations and applications for registration of either), or other statutory or legal protections available in respect thereof. The Fund further acknowledges that all or a part of the Software may be copyrighted or trademarked (or a registration or claim made therefor) by Custodian or its suppliers. The Fund shall not take any action with respect tot the Software inconsistent with the foregoing acknowledgement, nor shall the Fund attempt to decompile, reverse engineer or modify the Software. The Fund may not xxx, sell, lease or provide, directly or indirectly, any of the Software of any portion thereof to any other person or entity without Custodian’s prior written consent. The Fund may not remove any statutory copyright notice or other notice included in the Software or on any media containing the Software. The Fund shall reproduce any such notice on any reproduction of the Software and shall add any statutory copyright notice or other notice to the Software or media upon Custodian’s request.

  • Licence You must ensure that you hold all necessary licences, permits and approvals that are required by Law (including a Dairy Industry Licence) in order to comply with your obligations under this Contract. Failure to comply with the obligations under this clause may result in DFMC suspending the collection of your milk until such time as the failure is rectified.

  • Licensee “Licensee” means the individual or company that has entered into an Agreement with the Embassy. “Offer” means a response to a solicitation that, if accepted, would bind the offeror to perform the resultant Agreement.

  • Licensed Rights (a) (i) BNYM hereby grants to Company a limited, nonexclusive, nontransferable license to access and use the Licensed System in the United States through its employees (other than as expressly permitted otherwise by Section 2.1(a)(ii) below), solely in accordance with applicable Documentation, through the interfaces and telecommunication lines designated by BNYM, strictly for the internal business purposes of the Company, solely in support of the Core Services and solely for so long as any applicable fees are paid by Company.

  • Licensor any Person from whom a Grantor obtains the right to use any Intellectual Property. Lien: any Person’s interest in Property securing an obligation owed to, or a claim by, such Person, whether such interest is based on common law, statute or contract, including liens, security interests, pledges, hypothecations, statutory trusts, reservations, exceptions, encroachments, easements, rights-of-way, covenants, conditions, restrictions, leases, and other title exceptions and encumbrances affecting Property. Lien Waiver: an agreement, in form and substance satisfactory to Agent, by which (a) for any material Collateral located on leased premises, the lessor waives or subordinates any Lien it may have on the Collateral, and agrees to permit Agent to enter upon the premises and remove the Collateral or to use the premises to store or dispose of the Collateral; (b) for any Collateral held by a warehouseman, processor, shipper, customs broker or freight forwarder, such Person waives or subordinates any Lien it may have on the Collateral, agrees to hold any Documents in its possession relating to the Collateral as agent for Agent, and agrees to deliver the Collateral to Agent upon request; (c) for any Collateral held by a repairman, mechanic or bailee, such Person acknowledges Agent’s Lien, waives or subordinates any Lien it may have on the Collateral, and agrees to deliver the Collateral to Agent upon request; and (d) for any Collateral subject to a Licensor’s Intellectual Property rights, the Licensor grants to Agent the right, vis-à-vis such Licensor, to enforce Agent’s Liens with respect to the Collateral, including the right to dispose of it with the benefit of the Intellectual Property, whether or not a default exists under any applicable License.

  • Research License Each Collaborator shall allow the other Collaborator to practice any of its Non- Subject Inventions for the purpose of performing the Cooperative Work. No license, express or implied, for commercial application(s) is granted to either Collaborator in Non-Subject Inventions by performing the Cooperative Work. For commercial application(s) of Non-Subject Inventions, a license must be obtained from the owner.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

  • Sublicense SONY shall be permitted to sublicense the rights ---------- granted in Section 2.1 only to: (a) wholly-owned subsidiaries of SONY; provided that SONY shall promptly notify LEXAR in writing of sublicenses granted to subsidiaries and SONY shall acknowledge responsibility for such subsidiary's compliance with the terms of this Lexar Technology License Agreement; and (b) any parties for the manufacture, use, offer for sale, import and sale of Host Devices and any components of Host Devices, provided that such third parties shall only be sublicensed under LEXAR Intellectual Property Rights for that portion of a Host Device or of any component of a Host Device that communicates directly with a Licensed Memory Stick. SONY's sublicense rights under this Section 2.2(b) shall be contingent upon SONY entering into a written agreement with each sublicensee in the form of Exhibit C. SONY will provide LEXAR with a copy of each such --------- sublicense agreement immediately after execution thereof. Nothing in this Agreement shall be construed as permitting SONY to reveal LEXAR Confidential Information, as such term is defined in Section 6, to sublicensees under this Section 2.2(b). In the event that SONY determines that the Memory Stick Specification contains LEXAR Confidential Information, LEXAR and SONY agree to negotiate in good faith additional specific provisions to the form sublicensee agreement to sufficiently protect LEXAR's Confidential Information. LEXAR and SONY acknowledge that in the course of these negotiations, the parties' mutual interest in making the Host Device manufacturing license available as broadly as possible should be weighed against the importance of protecting LEXAR's Confidential Information. Sublicensees under this Section 2.2 shall not have the right to sublicense the rights granted under this agreement. * Material has been omitted and filed separately with the Commission.

  • Abuse, Neglect, Exploitation Grantee will; a. take all steps necessary, to protect the health, safety and welfare of its clients and participants. b. develop and implement written policies and procedures for abuse, neglect and exploitation. c. notify appropriate authorities of any allegations of abuse, neglect, or exploitation as required by 25 TAC § 448.703.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!