Energy Monitoring Hardware-Software Platform Sample Clauses

Energy Monitoring Hardware-Software Platform. In terms of energy monitoring, the deployed solution is comprised of two main components, namely, the Xxxxx Xxxxxxx smart-meter, and a gateway that is based on the Raspberry Pi computing eco-system. The communication between both devices is performed using the ModBUS RTU1 serial protocol, and the communication with the EMS is currently performed using 3G hotspots connected via USB. The gateway software consists mainly of three independent services/daemons running on the Raspberry Pi: i) to read the power consumption from the CG system using the Modbus protocol, and store the obtained measurements on a local MySQL database. This daemon is set to run roughly every second; ii) to compute and upload the data to the EMS. This service runs roughly every minute; and iii) to create backup copies of the raw measurements. This service runs once every day at 12AM. For additional details about the hardware and software configurations, please refer to D4.2 [3].
AutoNDA by SimpleDocs
Energy Monitoring Hardware-Software Platform. Regarding the energy monitoring system in the distribution substation, it will consist of the PQube3, which is a power quality analyzer from Power Standards Labs (PSL)3 and a gateway based on the 3 PQube3 power analyser, xxxxx://xxx.xxxxxxxxxxxxxx.xxx/product/pqube-3/highlights/ Raspberry Pi. These devices communicate by using the ModBUS TCP/IP4 protocol, thus, a local Wi-Fi network needs to be installed in the substation. The software running inside this gateway will comprise the same three services as in the UPACs gateway, namely, one daemon for reading and storing data (i.e., voltage, current, frequency, power) from the PQube3 running almost every second, one daemon for uploading the average data to the EMS every minute and one daemon for storing backup copies in the Cloud once per day. Moreover, additional scripts will be added in order to read high frequency data, stored in the PQube3’s FTP server, when a pre-configured event is triggered and to actuate in the XXXX system during the trigger of any event by reading the PQube3’s output relay signal and directly communicating with Vnet. Lastly, it is important to remark that, for this particular pilot, the PQube3 was chosen over the Xxxxx Xxxxxxx smart meter due to the nominal current and voltage requirements of the secondary winding of the substation transformer that are considerably higher than that for domestic installations. And also, the fact that PQube3 enables the possibility of triggering real-time events when selected metrics are outside pre-defined thresholds, which is key for Voltage and Frequency control as described in section 3.3.1.

Related to Energy Monitoring Hardware-Software Platform

  • SERVICE MONITORING, ANALYSES AND ORACLE SOFTWARE 11.1 We continuously monitor the Services to facilitate Oracle’s operation of the Services; to help resolve Your service requests; to detect and address threats to the functionality, security, integrity, and availability of the Services as well as any content, data, or applications in the Services; and to detect and address illegal acts or violations of the Acceptable Use Policy. Oracle monitoring tools do not collect or store any of Your Content residing in the Services, except as needed for such purposes. Oracle does not monitor, and does not address issues with, non-Oracle software provided by You or any of Your Users that is stored in, or run on or through, the Services. Information collected by Oracle monitoring tools (excluding Your Content) may also be used to assist in managing Oracle’s product and service portfolio, to help Oracle address deficiencies in its product and service offerings, and for license management purposes.

  • Software Updates XXXXX agrees to keep current with software licensed from Skyward and will install new versions on a timeline approved by XXXXX governance. This timeline will be communicated by NWRDC to the Districts. School District Workstations Configuration requirements for devices and their software that school district personnel use to access WSIPC’s software modules can be found on our website: xxxxx://xxx.xxxxx.xxx/technology‐team/. State Reports XXXXX will provide, at no additional fee, all data reports required by the state that impact 50% or more of the school districts in the state. WSIPC and NWRDC will work with state agencies to gather requirements on the required data. WSIPC will inform NWRDC staff of any mandated changes to state reports and NWRDC will communicate the information to the District. Appendix B NWRDC FTE Fees Fiscal Only NWRDC Software Support Services XXXXX Software Licensing Total FTE Fee $13.63 $20.34 $33.97 $15.56 $13.08 $28.64 $24.52 $20.34 $44.86 Student Only Full Service

  • Software Use Case Red Hat Enterprise Virtualization Supported on physical hardware solely to support virtual quests. Red Hat Enterprise Virtualization is designed to run and manage virtual instances and does not support user-space applications. Red Hat Enterprise Virtualization may be used as a virtual desktop infrastructure solution, however, the Subscription does not come with any software or support for the desktop operating system. You must purchase the operating system for each instance of a desktop or server separately.

  • Required hardware and software The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found here: xxxxx://xxxxxxx.xxxxxxxx.xxx/guides/signer-guide- signing-system-requirements. Acknowledging your access and consent to receive and sign documents electronically To confirm to us that you can access this information electronically, which will be similar to other electronic notices and disclosures that we will provide to you, please confirm that you have read this ERSD, and (i) that you are able to print on paper or electronically save this ERSD for your future reference and access; or (ii) that you are able to email this ERSD to an email address where you will be able to print on paper or save it for your future reference and access. Further, if you consent to receiving notices and disclosures exclusively in electronic format as described herein, then select the check-box next to ‘I agree to use electronic records and signatures’ before clicking ‘CONTINUE’ within the DocuSign system. By selecting the check-box next to ‘I agree to use electronic records and signatures’, you confirm that: • You can access and read this Electronic Record and Signature Disclosure; and • You can print on paper this Electronic Record and Signature Disclosure, or save or send this Electronic Record and Disclosure to a location where you can print it, for future reference and access; and

  • Hardware Warranty A. RISK OF LOSS If you purchase any of the hardware Products directly from us, risk of loss or damage to hardware, will pass to you and acceptance will occur upon delivery to your “ship to” address or, if special shipping arrangements are agreed to, upon delivery to your carrier or designee. Title to hardware Products will pass from HPE to you upon full payment for or delivery of the Products, whichever is later. You agree to properly insure the Products for the benefit of HPE between the time risk of loss and damage pass and the time title passes.

  • Hardware and Software In order to use the Services, you must obtain and maintain, at your expense, compatible mobile hardware and software as specified by Credit Union from time to time. Credit Union is not responsible for any third party software you may need to use the Services. Any such software is accepted by you as is and is subject to the terms and conditions of the software agreement you enter into directly with the third party software provider at time of download and installation.

  • Software Warranty We warrant that the Tyler Software will perform without Defects during the term of this Agreement. If the Tyler Software does not perform as warranted, we will use all reasonable efforts, consistent with industry standards, to cure the Defect in accordance with the maintenance and support process set forth in Section C(9), below, the SLA and our then current Support Call Process.

  • Client Software You may only use the client software with the ERP solution. You may install an unlimited number of copies of the client software to access your ERP solution.

  • Evaluation Software If the Software is an evaluation version or is provided to You for evaluation purposes, then, unless otherwise approved in writing by an authorized representative of Licensor, Your license to use the Software is limited solely for internal evaluation purposes in non-production use and in accordance with the terms of the evaluation offering under which You received the Software, and expires 90 days from installation (or such other period as may be indicated within the Software). Upon expiration of the evaluation period, You must discontinue use of the Software, return to an original state any actions performed by the Software, and delete the Software entirely from Your system and You may not download the Software again unless approved in writing by an authorized representative of Licensor. The Software may contain an automatic disabling mechanism that prevents its use after a certain period of time. RESTRICTIONS

  • Software Upgrades Software Upgrades consist of new product releases which are issued periodically and may include new functionality, enhancements, and bug fixes. Software Upgrades are provided only for standard hardware platforms and operating systems supported by COMSPOC as described in the Documentation. Software Upgrades will apply only to unmodified Software and commercially released updated versions of the Software. You are responsible for making or arranging for updates to interfaces for nonstandard devices or custom applications. Software Upgrades are provided subject to the terms and conditions of the then current and applicable COMSPOC Software License Agreement, available on COMSPOC’s website at xxxx://xxx.xxxxxxx.xxx/sla or with the deliverable Software or upon request. All major product releases and maintenance releases will be made available and may be shipped directly to you, upon request by contacting your COMSPOC point of contact or xxxxxxx@xxxxxxx.xxx. You may upgrade to the latest product version at any time during the term of the Annual Support and Upgrades Agreement. If you opt not to renew the Annual Support and Upgrade Agreement, You have 60 days from the end of the Annual Support and Upgrades Agreement term to upgrade to the latest product version available prior to the end of the Annual Support and Upgrades Agreement term. If You request an upgrade beyond this 60-day period, You will be required to renew the Annual Support and Upgrades Agreement in order to upgrade to the latest product version.

Time is Money Join Law Insider Premium to draft better contracts faster.